Asus M3A79-T Deluxe

[gOtVoltage]

Hmm what the heck, now this thing DOES boot when ACC set to 6%, I havent really changed nothing, only put some more clock to NB, memory, HTT and pci-e.

Btw, what does the CPU VDDA voltage do? Where should it be when overclocking?
And this still reboots if too much clock, tried 1.5Vcore, open window(freezing -8C outside..) and I put the 8-pin homemade adapter to the motherboard.. no effect :/

edit, some more to ask for, PCI-E watt limit.. at default its 25W ? .. what the hell is this, I tried 100W and all tests ran fine, but games usually goes to blackscreen and the graphics card starts to malfunction weirdly .. Allthought the comp doesnt crash, just the screen goes black(powersaving..)

Thats the Wrong PCI-E watt limit your adjusting.. The correct one will be preset @75watt...I believe its Lane #2 and #10..Just go throught each and only set the ones that ALLOW 16x. There will only be two lanes that run 16x.

NOTE:
In the same Menu pressF4 and 10 new PCI-E lanes will pop up on screen..

Two of those lanes Are X16lanes ...I set those to 200watts and AUTONONIMOUS.. I leave all other Lanes AUTO.

Also VDD is the BASE Volts for the Mobo.. The Higher You raise this the More Overall Volts you can achieve with VCORE and ACC.

I allways run @2.8v VDD.. 2.5v is default when on Auto.. Setting to 2.8v garentees that it wont Drop below 2.8v when overclocking..


.Also you Should Disable ACC and set 2.8v VDD for now and Manually Raise the Vcore For CPU/Nb slowly to see what makes its stable..This way you Know ACC isnt causing the Reboot...

Many things can Happen IF,,

If volts tooHIGH/LOW can reboot.
If CPU too HOT can reboot>
If the HT is too high it can reboot .
IF the NB is too High it can reboot.
If Ram timing is wrong can reboot.
If power supply is weak Can reboot..
thats just a few things to mention.

For a stock Phenom i would not use less than 500wattpsu that has a 8pin on it with at least 36amps on the Rail.

Try setting just the CPU Multi with Stock NB and NB 1.35volts ..On stock cooler you should be able to do 3.1/3.2ghz but will need to play with CPUvolts and Id use the 800ram or 1066ram divider if you have 1066..


P.S. BENBROWN
I use 1.68v CPU and 1.6v for NB while NB is @2000mhz for 3.52v.. These things like the Volts to somewhat be close together with the CPU bieng the same or Higher than NBvolts. For 3.5ghz with NB@2600+ i use NB@1.65v +2ACC . Now the sad part ,,just to run 20mhz higher i have to lower the NB to 2000mhz because this is my CPU's cieling no dout.

Ha haa how much do 45nm weigh?,, Santa's Sliegh with $h!tloads of them gonna be Heavy Eh