Striker pwns EVGA with Q6600 G0

[ShoNuff]

Here are my settings >


FSB Memory Clock - Unlinked
FSB(QDR)mhz - 1800
MEM(DDR) - 800

Multiplyer - (8)

Vcore - 1.60000v
MEM - Auto
1.2 HT Voltage - 1.80
NB - 1.4
SB - 1.60
CPU - VTT 1.45

SLI Aperature - Auto
NVGPU EX - Enabled
Change the tras of your ram to 8 and your trc to 18(or 10 & 20 respectavly) if you like ,but any other alterations on the ram we have wont boot or be stable ,and RAM voltages are AUTO
I hope this helps

#edit allso makeshure your running the 1303 bios

I read your post and thought...there is no way anybody is doing 1800 FSB on the Striker...especially with a Quad! Well, I was wrong big time.



I couldn't touch your speed at the volts you listed above for my Quad. I used the following:

Bios Version: 1303 (Would not work on 1305)
FSB Memory Clock - Unlinked
FSB(QDR)mhz - 1800
MEM(DDR) - 800
Multiplyer - 9
Vcore - 1.5
MEM - Auto
1.2 HT Voltage - 1.75
NB - 1.7
SB - 1.7
CPU - VTT 1.55

Testing for Orthos stability now. Set a new personal best for 3DMark06. Thanks for the inspiration.