***ASUS Rampage IV Extreme Owners Thread***

[Eldonko]

Good info thanks. I dont think many ppl realize this and shoot for 100 x 50 or similar like they have been doing on SB-E and as a result have to use more vcore. Ive been running 132 all along but that was just out of luck bc it was what I needed for mem optimization.

You may find that going to 125MHz and upwards is a bit more forgiving than 100 BCLK when it comes to Vcore on all CPUs (where possible).

-Raja

[LardArse]

Once you strap the cpu to other than 100, the cpu stops giving SVID commands to controller. So there cannot be 'dynamic VID' . Its Intel's way and characteristic of SNBE

[AndresR]

Guys, i need your advice here. I bought a RIVE BF3 edition on december from Newegg, and it arrived to my country last week (i was waiting for other parts), but there is no BF3 code inside . What should i do? Contact Asus or Newegg? Both?

[Raja@ASUS]

Guys, i need your advice here. I bought a RIVE BF3 edition on december from Newegg, and it arrived to my country last week (i was waiting for other parts), but there is no BF3 code inside . What should i do? Contact Asus or Newegg? Both?

Drop me a PM as you are NA based, I will need a photo or scan of your Newegg invoice plus your serial number and I will ask the CS team to sort a key for you.

-Raja

[FlanK3r]

Guys, can someone uplaod last OC key firmware? From FTP I can not it download. thx

[andressergio]

sup guys im new to this thread, i'll be getting the RIVE soon to fullfill my 6 core dream

i've been reading all the thread and why is it that 100x50 is harder than more bclk + low multi ? i read that 100x50 need more volts than 129x39 for ex, its the dif from SB now blck can be increased, so theres more perfomance gains ? or 100x50 still faster than 129x39

sorry maybe i will start shooting stoopid questions

cheers to all
Sergio

[cx-ray]

See for a possible reason: http://www.xtremesystems.org/forums/...=1#post5036365

[andressergio]

Picked up some new memory to play with. http://www.newegg.com/Product/Produc...82E16820147096

1600mhz 11-11-11-28, 1.35v. Have been playing with them a few hours, so far they are doing pretty good for the price. Passed HyperPi at 2133 10-10-10 at 1.43vdimm, also at 2400mhz 1.53vdimm 11-11-11.



Uploaded with ImageShack.us


Uploaded with ImageShack.us

Funny to look at in person, very low profile.


Uploaded with ImageShack.us

nice testings there i have that exact RAM

what is the aida bandw at 5Ghz HT with 2400 CL11 ?

cheers
Sergio

[RRunner]

Quick runs ... WC:






http://valid.canardpc.com/show_oc.php?id=2204293

Nice chip

[FlanK3r]

yes, very nice chip. Did u tested max multi load?

[OC Nub]

nice testings there i have that exact RAM

what is the aida bandw at 5Ghz HT with 2400 CL11 ?

cheers
Sergio

Thanks!

Im not sure exactly. I went back to s1155 for a couple days to try old benches, but Ill test this weekend and let you know.

Welcome to the thread, and Congrats on the new rig!

[RRunner]

yes, very nice chip. Did u tested max multi load?

Not yet. Maybe in the next few days

[andressergio]

Thanks!

Im not sure exactly. I went back to s1155 for a couple days to try old benches, but Ill test this weekend and let you know.

Welcome to the thread, and Congrats on the new rig!

thanks OC nub i dont have it yet, mobo will arrive in 15 days i guess and chip im waiting new stepping to pull the trigger, the other parts i have them

thanks i wait forward for your results
Sergio

[AndresR]

Still learning a lot of this mainboard, but what do you guys think of my current settings, should i lower the VVT or VCCSA?

[s4pphire]

Still learning a lot of this mainboard, but what do you guys think of my current settings, should i lower the VVT or VCCSA?

I'm using similar settings with 32GB for 24/7 and I found that I don't need more than 1.15 VTT and VCCSA at 2400MHz, I also dropped PLL to 1.7. If you have 2133 Z, you should be able to run it comfortably at 2400 if you slightly loosen the first timings without having to increase voltage beyond 1.6.

[AndresR]

I'm using similar settings with 32GB for 24/7 and I found that I don't need more than 1.15 VTT and VCCSA at 2400MHz, I also dropped PLL to 1.7. If you have 2133 Z, you should be able to run it comfortably at 2400 if you slightly loosen the first timings without having to increase voltage beyond 1.6.

Thanks, i'll give it a try.

[p3gaz_001]

waiting for my board to come back from rma..... 5 days life, and K.o. :|

[LardArse]

new 0006b bios

http://www.mediafire.com/?1332uzr1eaq6ppc

[l0ud_sil3nc3]

new 0006b bios

http://www.mediafire.com/?1332uzr1eaq6ppc

better than 1005 in your opinion?

[LardArse]

on par at least i think

[andressergio]

cant wait to join the club

[keineAhnung]

hello that is with you so
So my boot time to the beep
So switch on the power supply (standby)
33.2 sec
Normally off completely
39.2 sec

also did you ever?

[froxic]

Hi guys, I have some time to test this supreme board and I made (i hope) cool video tribute for this MB. I hope that you will like it!



Aircooling results (Noctua NH-D14)

SuperPI 1M: 7.301s @ 5200 MHz



SuperPI 32M: 7m 14.867s @ 5100 MHz



Hexus PiFast: 14.51s @ 5150 MHz



wPrime 32M: 3.386s @ 5100 MHz



wPrime 1024M: 103.957s @ 5000 MHz



Cinebench R10 x64: 45639 @ 5075 MHz



Cinebench R11.5 x64: 14.64 @ 5050 MHz

[CARLOS*A1]

Friends, as you have set the PCI Express I am trying to setup 3 way sli, but grabs. I've tried various combinations and do not grab 3 wa sli, Place 1-3-5 VGA ports.

[andressergio]

Hi guys, I have some time to test this supreme board and I made (i hope) cool video tribute for this MB. I hope that you will like it!



Aircooling results (Noctua NH-D14)

SuperPI 1M: 7.301s @ 5200 MHz



SuperPI 32M: 7m 14.867s @ 5100 MHz



Hexus PiFast: 14.51s @ 5150 MHz



wPrime 32M: 3.386s @ 5100 MHz



wPrime 1024M: 103.957s @ 5000 MHz



Cinebench R10 x64: 45639 @ 5075 MHz



Cinebench R11.5 x64: 14.64 @ 5050 MHz

very nice mate i hope i can get a decent chip like that

grats
Sergio