Page 27 of 90 FirstFirst ... 17242526272829303777 ... LastLast
Results 651 to 675 of 2226

Thread: i5-2500K/2600K batch number and o/c results

  1. #651
    Xtreme Guru
    Join Date
    Jun 2010
    Location
    In the Land down -under-
    Posts
    4,452
    Quote Originally Posted by Ket View Post
    Check my edit I was thinking of Haswell/Rockwell, Ivy will indeedy be 22nm.
    , Z68 looks quite good seeming as its a p67 but with ENABLED integrated graphics, is lga2011 Ivy bridge?? q2 for z68 q4 for lga2011
    Last edited by Johnny87au; 02-02-2011 at 09:16 PM.

    Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?

  2. #652
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    I dont think it will be, too early for 22nm.

    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  3. #653
    Xtreme Guru
    Join Date
    Jun 2010
    Location
    In the Land down -under-
    Posts
    4,452
    Quote Originally Posted by aussie-revhead View Post
    I dont think it will be, too early for 22nm.

    Well anand is quite positive, Definately expect z68 since its still 1155.. but not sure about ivy hitting us so soon..

    Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?

  4. #654
    Xtreme Member
    Join Date
    Oct 2006
    Posts
    311
    Just finished installing my Asus Maximus IV. And without even trying hard, I'm at 5.1 @ 1.38v. Didn't even need to use Intel PPL overvoltage... Changed 2 or 3 settings and i was good to go!

    I didn't even tried LinX or Prime, friends were waiting for me to play Borderlands. Played 4 hours in a row at 5.1 without a single problem. That was cool. Then 2 hours of Darksiders. Rock-stable. Tomorrow, I will try pushing it.

    i7 2600K batch L041B204.
    Last edited by Levesque; 02-02-2011 at 10:05 PM.
    i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64

  5. #655

  6. #656
    Xtreme Addict
    Join Date
    May 2007
    Location
    Hampshire, UK
    Posts
    1,656
    Quote Originally Posted by PolRoger View Post
    That's right... and your chip is probably one of the few that can do x56 maybe even x57?
    Thats my 2500K, stops at x54


    Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.

    Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.

    Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.

  7. #657
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Quote Originally Posted by Levesque View Post
    Just finished installing my Asus Maximus IV. And without even trying hard, I'm at 5.1 @ 1.38v. Didn't even need to use Intel PPL overvoltage... Changed 2 or 3 settings and i was good to go!

    I didn't even tried LinX or Prime, friends were waiting for me to play Borderlands. Played 4 hours in a row at 5.1 without a single problem. That was cool. Then 2 hours of Darksiders. Rock-stable. Tomorrow, I will try pushing it.

    i7 2600K batch L041B204.
    I just installed this same batch and so far it seems worse than my D1 ES, max clock so far is 200mhz lower only 48x multi ... still working on it.

    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  8. #658
    Xtreme Addict
    Join Date
    Oct 2006
    Posts
    2,141
    Anyone overclock an L045 yet? I have had mine sitting here for a week now and haven't bothered with it yet, hopefully I will work up the desire to get it running this weekend. But does anyone else have this batch?

    L045 CPU was a replacement I got for my dead L040 CPU
    Rig 1:
    ASUS P8Z77-V
    Intel i5 3570K @ 4.75GHz
    16GB of Team Xtreme DDR-2666 RAM (11-13-13-35-2T)
    Nvidia GTX 670 4GB SLI

    Rig 2:
    Asus Sabertooth 990FX
    AMD FX-8350 @ 5.6GHz
    16GB of Mushkin DDR-1866 RAM (8-9-8-26-1T)
    AMD 6950 with 6970 bios flash

    Yamakasi Catleap 2B overclocked to 120Hz refresh rate
    Audio-GD FUN DAC unit w/ AD797BRZ opamps
    Sennheiser PC350 headset w/ hero mod

  9. #659
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Do we have a template here of the basic settings we need to change to get things started? My new cpu doesnt seem to like my last settings.

    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  10. #660
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by EniGmA1987 View Post
    Anyone overclock an L045 yet? I have had mine sitting here for a week now and haven't bothered with it yet, hopefully I will work up the desire to get it running this weekend. But does anyone else have this batch?

    L045 CPU was a replacement I got for my dead L040 CPU
    sup mate i have L045B021 if it was in my hands you already go the numbers but its on US and will take 1,5weeks to arrive

    i searched other forums and see only a L045A doing nicely...

    clockt it !!! and grab some results for us

    cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  11. #661
    Registered User
    Join Date
    Apr 2008
    Posts
    12
    Quote Originally Posted by aussie-revhead View Post
    GiN - silly question but is HT off?

    yes ht off i dont need it anything i just play fps games =) now i testing vcore 1.45 and 5.2ghz without ht looks good but that i know after 5ghz needs much more vcore..

    Astennu how u chip goes ?

  12. #662
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Boston, MA
    Posts
    488
    My new 2600k L042B208 is turning out to be a pretty good chip. 4.8ghz at 1.375V without internal pll overvolt enabled. My 2500k needed 1.41V with the same settings and internal pll overvolt enabled. My new chip does have some strange temp issues. The 3rd core is 8C higher than cores 1 and 2. The 4th core is 6C cooler than cores 1 and 2. Remounted several times.
    **Georgia Tech Grad, I am an Electrical Engineer with a specialization in RF IC design and Analog circuits.**

    Intel I7 3770K Delidded
    Gigabyte Z77X-UD5H
    2x4gb Gskill 7-8-7-16
    EVGA GTX680 Signature OC
    Crucial M4 256gb
    Seasonic X-750
    Watercooling Loop: Raystorm Acetal, EK GTX580 Full Cover, MCR420, MCR320, MCP35X2 & 7 x AP-15 Gentle Typhoons

    Heatware: gte460z

  13. #663
    Xtreme Addict
    Join Date
    Mar 2008
    Location
    Minnesota
    Posts
    1,653
    Quote Originally Posted by babalouj View Post
    My new 2600k L042B208 is turning out to be a pretty good chip. 4.8ghz at 1.375V without internal pll overvolt enabled. My 2500k needed 1.41V with the same settings and internal pll overvolt enabled. My new chip does have some strange temp issues. The 3rd core is 8C higher than cores 1 and 2. The 4th core is 6C cooler than cores 1 and 2. Remounted several times.
    I have one wacked out core as well, I attributed it to a bad sensor since I remounted numerous times and things looked great each time. Other temps are all great so I just ignore my oddball
    i5 2500K @ 4.9GHz+ 8GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 6 Asus P8P67 Pro CrossFire 6970's @ 950/1450
    Xeon X5677 @ 4.5Ghz 6GB G-Skill RipJaws DDR3-2000 @1600Mhz CAS 7 Gigabyte EX58-UD5 4870x2
    i7-880 @ 4.2Ghz+ (still playing) 4GB G-Skill RipJaws DDR3-2000 @2300Mhz CAS 9 Asus Maximus III Formula MSI Hawk 5770

  14. #664
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Atlanta
    Posts
    493
    Quote Originally Posted by C-N View Post
    Thats my 2500K, stops at x54
    Thanks I missed that... still I would think that your L040B308 could also do pre-AVX LinX at x53... non-HT. I guess then that x52 is the highest 2600K HT LinX that I've seen. Even if I had one that could do it I'm not sure that I would try. I would prefer to test x50 with lowest volts possible. A 2600K HT at x50 running in the range of 1.30v to 1.325v load ... maybe someday we will see such a sample.
    Ryzen 9 on the test bench... Sometimes older generation/tech as well.

  15. #665
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,822
    Quote Originally Posted by Johnny87au View Post
    , Z68 looks quite good seeming as its a p67 but with ENABLED integrated graphics, is lga2011 Ivy bridge?? q2 for z68 q4 for lga2011
    From what I've read, Ivy is going to be 1155 and we might see better than 4/8 on 1155 when Ivy comes along too. Seems to be intel have plans on keeping 1155 around for a while. Z68 will be nice to see, but AFAIK it won't really offer anything significant over P67, just the graphics thing and something to do with storage. Be interesting to see if Z68 will allow the integrated graphics to be used for physics, if it does, I'll probably get a Z68.
    Last edited by Ket; 02-03-2011 at 06:02 AM.

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

  16. #666
    Xtreme Addict
    Join Date
    May 2006
    Location
    Philippines
    Posts
    1,124
    Problem is it will be same socket 1155 but u will need a different board have read ivy bridge will not be compatible with P67! Same pin but not for cougar chipset!

  17. #667
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Guys, with my P8P67 EVO since cpu change (then bios update) the voltage in TurboV reads much lower than cpu-z, they were very close before but now its like strong LLC is always on. For example TurboV says vcpu is 1.165 (same as default) but its priming at 4500 with cpu-z showing 1.248v, so why is this?

    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  18. #668
    Xtreme Addict
    Join Date
    May 2007
    Location
    Hampshire, UK
    Posts
    1,656
    @ PolRoger

    Ye the 2600K can run whatever you can cool!!!...

    5GHz is sweet with either a 2500 or 2600k & more than enough for daily use.

    lol already we need a magic new stepping to get lower voltage


    Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.

    Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.

    Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.

  19. #669
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,822
    Quote Originally Posted by bro20000 View Post
    Problem is it will be same socket 1155 but u will need a different board have read ivy bridge will not be compatible with P67! Same pin but not for cougar chipset!
    Where did you see that? I haven't seen anything saying that. Ivy is just going to be architectural tweaks, a die shrink and I think the integrated graphics on Ivy will be better too. Nothing P67 can't handle.

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

  20. #670
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Are you guys finding that the higher end motherboards are clocking these better? I dont need all the pcie's that the high end motherboards have, two is plenty, I just want to unleash any potential my cpu might have.
    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  21. #671
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Quote Originally Posted by EniGmA1987 View Post
    Anyone overclock an L045 yet? I have had mine sitting here for a week now and haven't bothered with it yet, hopefully I will work up the desire to get it running this weekend. But does anyone else have this batch?

    L045 CPU was a replacement I got for my dead L040 CPU
    yes mine wont boot past x50 lol

    @aussie no, a guy on my team boots x56 on a micro board. only issue is if you want to change bclk and some ram options
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots

  22. #672
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Thanks Splave, so its all in the cpu.... people with good ones are very lucky.

    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  23. #673
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,822
    Yep its all in the CPU. Don't get caught up in the manufacturers pissing contest of how many phases a mainboard has. I've seen a 8 phase mobo and a 16 phase mobo clock the exact same CPU to identical speeds. Linky

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

  24. #674
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Splave View Post
    yes mine wont boot past x50 lol

    @aussie no, a guy on my team boots x56 on a micro board. only issue is if you want to change bclk and some ram options
    @splave what batch is your L045 ? A or B ?

    cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  25. #675
    I am Xtreme Ket's Avatar
    Join Date
    Apr 2004
    Location
    United Kingdom
    Posts
    6,822
    Anybody know how well a 2500k L049A796 tends to clock? Mine is sitting @ 4.5GHz so far but it seems a tad low.

    "Prowler"
    X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2

    Cooling:

    6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240

    Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
    Modded X570 Aorus UEFIs

Page 27 of 90 FirstFirst ... 17242526272829303777 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •