Hi all
after my 9800GTX+ modded (thanks Largon) today and had some nice time i am looking for hard mod my Gainward 260GTX, can't found a mod online
Softmod don't work here
here is the card modell :
http://www.gainward.com/main/vgapro.php?id=119
and here is the pix same as palit
Back
Closer pic
http://www.techpowerup.com/reviews/P.../back_full.jpg
Front : Voltage regulator is Richtek.
http://www.techpowerup.com/reviews/P...mages/vreg.jpg
Last edited by hiwa; 10-12-2009 at 04:48 AM.
Originally Posted by LardArse
ok guys here should be right point
pin6 to ground measures 1275 Ohm
waiting for expert confirm
Last edited by hiwa; 10-11-2009 at 11:56 AM.
hiwa, yes, You are right. RT8841 is for Vgpu. If You measured def resistance between FB and GND right, then 50k VR is fine.
RT9259A is for Vmem. FB is pin 4.
OT: celemine1Gig or largon - is it 2 phase pwm with 2 coil per phase to GPU? If so, then why is there 3 caps per phase? Tnx!
Last edited by ceemic; 10-11-2009 at 02:41 PM.
Vmods - what can possibly go wrong? ©
modded,tested and works perfect on air
my pot is not compatible with this 260GTX, have different holes distance
so can't test ln2 on,will try max @ air
RT8841 is by Richtek, not Realtek.
=)
It's 4 phases.
Caps are not "per phase" (they never are), all those 6 polycaps are in parallel on the same post-choke plane where phase outputs are merged.
Last edited by largon; 10-12-2009 at 03:12 AM.
You were not supposed to see this.
largon, tnx!
Vmods - what can possibly go wrong? ©
yes sorry my mistake.
Hehe, 'was just teasing.
=)
You were not supposed to see this.
vgpu & vmem reading points ?
10x !
Posting Permissions
Reply With Quote
Bookmarks