Lol, I'm allready seeling of 3 of my old 102.3's now :p
I would buy it!
I think its a good idea but wouldn't buy it
Its a bad idea
Lol, I'm allready seeling of 3 of my old 102.3's now :p
using a PA140.X could eliminate the need for a second loop in some cases, I would like to think.
Given the surface area, even with 120mm fans and adapters so as to not have to buy 140mm fans...............
Is this to far fetched?
fermiNow Dave will see FERMI where ever I go
Originally Posted by jbartlett323
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
I like a lot the idea, and probably if they end up in production the reason to start a new rig. For a long time I was thinking in building my own PA160 shroud to use 140mm fans in them. The downside is the lack of really interesting 140mm fans.
I might eventually by one, if released. My Stacker can definitely fit it, but until my MCR-320 isn't sufficient i'd be hard pressed to upgrade.
Why is it drug addicts and computer afficionados are both called users?
| AMD Phenom II X6 & Xigmatek Dark Knight
| ASUS M4A89GTD PRO
| Sapphire HD 5770 1GB
| Mushkin BL 2 x 2GB
| WD Caviar Black 1TB
| Corsair TX650
| Lian Li PC-K7 Black
That will be a monster. I wonder if we can get Ben at Mountain Mods to make the new UFO capable of holding them? I guess it would not be a cube but something like...
18w x 18d x 24h
XSWCG Disclaimer:
We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.
Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".
Now im wanting a 140.2 even more than ever becacue I realize the top of my case is 150mm wide and it would be the perfect fit
Heatware -> http://heatware.com/eval.php?id=51939
Ebay -> http://myworld.ebay.com/onewhoisplug
Feel Free to hop in my ventrio server and chat with us
Vent6.gameservers.com:4498
It would be perfect for most cases, I would like to get one or two 140.2 or 140.3 for the floor of a case
that is what 120>140 adapters are for.
fermiNow Dave will see FERMI where ever I go
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
I'd only buy one if MMs designed a case that would accommodate it without modifications. It would also have to be significantly quieter than my P120.3 in order to justify spending the money on a new case/rad.
If they make it to production I'm in for 2.
i may not buy one for a while, but whenever i get around to buying my PA's, if these are out, i'll get these.
Hey guys any updates on this project?
i7 920 3922A436 W/C HEATKILLER | DFI LP UT X58-T3EH8 W/C Swiftech MCW30 | Corsair 6GB DDR3-1600 Ram Kit (3 x 2GB, PC2 12800, 7-7-7-20, TR3X6G1600C7) | Sapphire HD4870 X2 W/C (EK) | PC P&C 750 Quad Cf |1 x Intel Postville 80GB SSD | 2 x Raptor 36Gb Raid0 | 2 x Seagate 500Gb Raid0 | 2TB Western MYBOOK STUDIO EDITION II Raid0 | PHILIPS 42PFL8404H | WIN 7 Ultimate x64 | CoolerMaster CM Stacker | ThermoChill PA120.3, Swiftech MCP 355 with XSPC v3 top
I would have bought one yesterday if I could. I can't wait until Thermochill starts making a PA140.x series. But what I heard by email from them earlier this week is that if they end up doing it, it may not be until next year--although later this year hasn't been ruled out. Maybe we need to deluge them with emails!
Im sure when they are ready to start making them they will (and spamming them wont help)
i think they are trying to make demands for pa120.x meet, so till next year pa140.x...
Make a PA1XX series that fits exactly the width of a 5&1/4" bay and I'm sold. I'm building my PA120.3 into a CM Stacker with custom brackets to mount the rad as a front intake system.
If you designed a rad that fit EXACTLY into a 5&1/4" bay I'd be all over it, it would save a hell of a lot of time designing & manufacturing custom brackets.
core i7 920, gigabyte EX58-UD5, 4870x2
DDC3.2 > PA120.3 > DD4870x2fc > Fuzion v1 > PA120.2 > EK Res
hmm, it'd be interesting if it came with the holes to mount it right in the drive bay. not really that big of a point though since you'd still need to cut the top of the case. and in most cases, you'd need to dremel off the bar at the top of the drive cage as well
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
I'd buy one. But then I hope MM would put out some cases built for it (and for PA rads in the back too.)
MM Extended U2-UFO CYO (Duality front, Standard back, Horizontal Mobo brace) Anodized Black || eVGA X58 || Intel i7 920 || 6 GB Corsair Dominator PC3-12800|| eVGA 295GTX || Asus Xonar Essence STX || VisionTek 650 TV Tuner || 1 300GB WD Velociraptor || 1TB WD's Black Ed. || LG 22X DVD-Writer || Lite-On 20x DVD-Writer || Corsair CMPSU-1000HX PSU
CPU Loop: DDC-2 w/ XSPC Reservoir Top -> Swiftech GTZ -> Thermochill PA120.3 (Push: 3 Scythe S-Flex G)
GPU Loop: DDC-2 w/ XSPC Reservoir Top -> (Koolance VID-NX295 FC block) ->Thermochill PA120.3 (Push: 3 Scythe S-Flex G)
Chipset Loop: DDC-2 w/ XSPC Reservoir Top -> Alphacool Silentstar Dual HD waterblock enclosure -> Bitspower Black Freezer eVGA x58 MOSFET-> Bitspower Black Freezer eVGA x58 NB -> Thermochill PA120.2 (Pull: 2 Scythe S-Flex G)
2 x Dell 2408FPW LCD || Logitech Z-5500 Digital 5.1 || Logitech G9 Mouse || Logitech G15 LCD Keyboard || Logitech Quickcam Ultravision || Sennheiser Headphones
Hrmm, I can't help but resurrect this. If it happens, I'll order a custom MM 22" cube and buy 2.
Actually, I would be quite pissed off if a PA140.3 or PA140.4 was released. Because I just bought a PA120.3 and I would not be able to afford the PA140. So, it's a bad idea.
EDIT:
Old thread
Asus Rampage II Gene | Core i7 920 | 6*2GB Mushkin 998729 | BFG GTX280 OCX | Auzentech X-Fi Forte | Corsair VX550
—Life is too short to be bound by the moral, ethical and legal constraints imposed on us by modern day society.
We are intel a making a mobo that has room to accommodate 4x V/c in SLi and dual cpu's its called skulltrail link tp://www.theinquirer.net/en/inquirer...off-skulltrail
my 2c's worth i think it would awsome i have seen even the early adopters of 140mm fans do very well very low dba and very high cfm
I have 3 girlfriends, my job, my car, and my computer. My job is the rich girl, just spend some time with her and she will provide a supply of cash. My car is the material girl, a lot of money from the rich girl goes on her. Have to be careful to keep her happy. My computer is the faithful girlfriend, I dont need to spend much on her but she is still good to me.
this should be locked, marci has already said there will not be a 140.x rad.
I've built at least ten rigs with PA160 rads and would definitely snatch up a half dozen of the 140.1 when they come available
20 Logs on the fire for WCG:i7 920@2.8
X3220@3.0
X3220@2.4
E8400@4.05
E6600@2.4
I hope that "when" is accurate. I'm currnetly working on a 24" cube design I can send to MM for custom fab if these ever see daylight.
isnt that a little excessive thats like 13824 cubic inches thats alot of room,
I have 3 girlfriends, my job, my car, and my computer. My job is the rich girl, just spend some time with her and she will provide a supply of cash. My car is the material girl, a lot of money from the rich girl goes on her. Have to be careful to keep her happy. My computer is the faithful girlfriend, I dont need to spend much on her but she is still good to me.
Posting Permissions
Reply With Quote
Bookmarks