ok, i've looked for ever and no one has seemed to have done it...i wanna Vcore mod my k8n...not sure how to..i looked on the board to find the chip that controlls it, but im not sure how to tell what it is.. could some one help me identify the chip?? thanks!
ps, its a msi k8n neo..not neo 2 or 4 or anything...the socket 754 board...
up..cmon people some ones gotta be able to help!
Post a pic of the board. CPU area, please.
i tried taking some, but i couldnt find macro mode so it looks kinda iffy..
i took a pic of what i think is the controller...but i am not sure...any ways...here's waht i have, if you want a more general board picture let me know..
big pic, click on it to view...
http://www.alienhax.us/uploads/compstuff%20003.jpg
What's written on that IC right beside the FAN connector?
Last edited by Malves; 05-07-2005 at 07:40 AM.
this one...
ok, its hella hard to read, but this is what im 99% sure it is...
ISL6569CB
P0427bcsk
^
could be a o, but i think its an 0
that help ya at all?
EDIT: looked on google, only thing i could find is a quote on a forum
"V core mod use a 50K vr to pin 10 of chip ISL6569CB :-"
soi would go ground to 50k VR to pin 10, that sound right to you? thanks
Last edited by boardsportsrule; 05-07-2005 at 10:00 AM.
ISL6559CB, I believe. Yes, Pin10 to pin15 (GND) via 50k trimmer. Lower resistance for more vcore.
Please, note: Do at your own risk, XS owners, members and I will not be liable for any damage caused to you or your hardware, neither can be liable for any breach of the warranty.
yea yea yea...all that warranty BS...lol, ok thanks
EDIT: i think it is the ISL6569CB, there are both of them, only difference is the ISL6569CB vs 6559 is less pins..
Last edited by boardsportsrule; 05-07-2005 at 10:32 AM.
Ok, still the same mod pin10 to pin15 via 50k.
Last edited by Malves; 05-07-2005 at 10:54 AM.
done and done! works great. thanks for the help...how did you know which chip it was??? i have many boards in my possession that i wanna volt mod but not sure how to figure out which chip is the controller for that kinda thing....once i know which chip it is i can do it but how do i know which it is???? PS i used that same ground in that pic u showed above...didnt see the pic tho..found a data sheet and used that...thanks for the help!! WOO
PPS ihave a picture but im not sure why i would post it..just 2 wires soldered onto the IC..if any 1 is interested ill host and post it...
Probably all NF3 boards use ISL6559 or ISL6569 for vcore controller. So I just looked for an IC that looked like either one.
Please, post the pic. If it is of good quality, I'd like to put it on my site. If you give me permission, of course.
yep, ill do that..but im getting ready to do the VDD modd too... then i can give ya pics of the Vdimm, Vdd and Vcore
Hey Malves, if you need some pictures, u migh have a look at some here (if u find some usefull one, just use it):
MB and PSU
http://www.xtremesystems.org/forums/...907#post854907
or Grphx
http://www.xtremesystems.org/forums/...901#post854901
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Hey is a Vcore Possiable??
The IC on the right is: W83
310DS
441LB
Pic
Last edited by bypolar; 05-18-2005 at 05:15 AM.
Asrock Extreme3 Gen3
Intel 2500K @5.0 1.52V
Thermaltake Frio
4-4GB Kinston HyperX 1600's
1-256Gb Crucial M4 SSD
Xion 1000W (Made by Superflower)
2-Evga GTX570 in SLI
Antec DF-30
Windows 7 pro 64 bit
Just a regular guy, Not Xtreme!!
If I sound STUPID!! it is because I am.
Not everyone can be a Genius!!
Posting Permissions
Reply With Quote
Bookmarks