Holy bananas! Imagine when we got more vcore to play with...
Imagine when we got a Conroe XE 3,33 GHz + more voltage to play with...
Got more inf from Tarosa.
No Vmod yet still analyzing so he believes Vcore was as close to what cpu-z indicated.
(Set up @May 16)
For modPI 1M 14.609s @3482.8MHz
M/B: Intel D975XBX Rev.303
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix 512MBx2
HDD: HITACHI HDT722516DLAT80 164GB
VGA: Matrox Millennium G450 PCI
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003
http://www.geocities.jp/gbxfs134/D97...are/H14609.JPG
(Set up @May 17)
For modPI 1M 14.468s @3472.1MHz
Cooling: LN2
M/B: Intel D975XBX Rev.303
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix 512MBx2
HDD: Seagate ST318453LW 18GB ULTRA320/Adaptec 39320D 32Bit PCI
VGA: KUROUTO SHIKOU FX5200 PCI 128MB
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003
http://www.geocities.jp/gbxfs134/D97...are/S14468.JPG
Comments: I can hardly sleep tonight till find out the way to Vmod
nice
DFI Lanparty nF4 SLI-D || AMD Athlon64 4000+ SD || 7900 GT|| GEIL 2*512mb BH-5 @250 Mhz 2-2-2-5 ||2*256 Old BH-5 285Mhz 2-2-2-5 || Tagan 530W
Super Pi: 25s:Pic
why is your 3.3v @ 3.65 ?
retired computer enthusiast
truly amamzing
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
SCSI made a difference.....
amazing results man
keep on going
Have a nice day
QX9650 ES - 1M @7,984 sec - Asus Maximus Formula SE - LN2
E6600 - 1M @9,937 sec - Asus Maximus Formula SE - LN2
E6600 - 1M @10,016 sec - LN2
E6600 @ 4100mhz AIR -1M 12,500sec
E6600 @ 4285mhz AIR validation
OCZ PC8000 @ 684mhz 5-5-5-15 1M
http://www.overklokken.info --> THE dutch overclocking website.
Where to find that PLL control program, clockgen 1.0.4.4?
UPDATE By Tarosa
Except 1M, think others are new WRs-- hard to keep tracking the records recently
(Set up @May 18)
Cooling: LN2
M/B: Intel D975XBX Rev.303 Vcore1.6V(BIOS)
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix 512MBx2
HDD: Seagate ST318453LW 18GB ULTRA320/Adaptec 39320D 32Bit PCI
VGA: KUROUTO SHIKOU FX5200 PCI 128MB
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003
modPI 1M 13.672s @FSB 460.1MHz
modPI 2M 32.860s @FSB 460.1MHz
modPI 4M 1m15.969s @FSB 460.1MHz
modPI 8M 2m50.859s @FSB 458.2MHz
modPI 16M 6m24.266s @FSB 454.4MHz
modPI 32M 13m53.422s @FSB 450.6MHz
Last edited by fredyama; 05-19-2006 at 06:36 AM.
Sorry for the confusion they are all done by Tarosa as in the titleOriginally Posted by NiCKE^
Ah thanks, congrats him from me. He got WR in everything except 1M! Really amazing hehe. Want to see what he can do with a "real" motherboard like Asus, MSI or DFI
Intel FTW!
Beanna
Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?
OCZ?Originally Posted by freecableguy
Intel FTW!
Beanna
Says he's using Crucial 8000 on his set up lists old boy.Originally Posted by freecableguy
AFAIK, Vdimm was still 2.2V.Originally Posted by freecableguy
the northbridge is on air or watercooled?
Xeon 3060 L631B115 max 4680 superpi SS 10.904
Asus P5B deluxe + vdrop vcore vddr2 vmch mods
2x1go crucial ballistix pc8000
2x1go crucial ballistix pc6400
8800 gts 320 // x800xl // 9250 pci
corsair hx 620 // seasonic s12 500
DOD chilly1 R402a
watercooling // zalman9700
FYI, TAM has just figured out Vdimm mod:Originally Posted by freecableguy
@SC2612E(U6H1): 20--100KOhm VR at #1pin to GD
He added 220Ohm fixed resistor to prevent a short circuit.
Around 2.8Vdimm at about 1.1KOhm as shown below.
Searched but could not find its URLOriginally Posted by ar7786
You can get 1.0.4.4a at kyosen
On airOriginally Posted by d@rkn1ko
Sweet thanks, this will open a whole new level for me.
my current best @ 3.9Ghz
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Originally Posted by freecableguy
You are quite welcomeOriginally Posted by FUGGER
TAM & other members said thank you FCG for his mods and wish you all the best.
Bookmarks