DFi CFX3200 Bios setup for GSKILL products

[GSKILL TECH]

DFi CFX3200 motherboard ONLY!
Please install RAM into Orange Slot!

F1-3200PHU2-1GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4




F1-3200PHU2-2GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200USU2=2GBHS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4



F1-3200PHU2-1GBNT

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBNT
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BIU2-2GBHX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 1 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-1GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-512ZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000BIU2-2GBHV

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000USU2-2GBHZ

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BWU2-1GBGH
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 2
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4800DSU2-1GBFF

Bios > Genie Bios Setting
FSB = 300
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 4
Tras = 8
Trp = 4
Trc = 8
Trfc = 14
Trrd = 2
Twr = 2
Twtr = 1
Trtw = 2
Tref = 4196
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4

[nn_step]

would you mind adding one for GH?

[GSKILL TECH]

i'll try

seems like DDS 1 and DDDS 4 for GH too
memtest 80% now

[GSKILL TECH]

GH added, i am testing FF for TCCD now

[GSKILL TECH]

FF added

[manu]

i cant pass 260mhz.

[manu]

someone help me?¿

[Cornelious0_0]

I realise it's been some time since any posts were made in this thread, but it would really be great if I could get my hands on similar information for my RDX200 CF-DR. I'm having a hell of a time getting it running at 280x10 1:1 2.5-3-3-7 (it's done 310x10 1:1 2.5-3-3-7 on better cooling in another location with the same mobo/cpu/ram combo) and it's driving me crazy.

I realise that the RDX200 was kind of abandoned, but there has to be some end to my endeavor...

I'm using the F1-4800DSU2-1GBFF kit by the way.

[eXo_Ultimate]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

[GSKILL TECH]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

F2-6400PHU2-2GBNS will not work on RD600. it is incompatible.

[eXo_Ultimate]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.

[GSKILL TECH]

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.

f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

[cadaveca]

Well, considering the board this thread is about is for AMD SKT 939, i HOPE your ddr2 doesn't work in it...