DFi CFX3200 Bios setup for GSKILL products

[GSKILL TECH]

DFi CFX3200 motherboard ONLY!
Please install RAM into Orange Slot!

F1-3200PHU2-1GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4




F1-3200PHU2-2GBNS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200USU2=2GBHS

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 3
Tras = 5
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4



F1-3200PHU2-1GBNT

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBNT
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BIU2-2GBHX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 1 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-1GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-512ZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 6
Trp = 3
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200PHU2-2GBZX

Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000BIU2-2GBHV

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 3
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4000USU2-2GBHZ

Bios > Genie Bios Setting
FSB = 250
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 3
Trd = 4
Tras = 8
Trp = 4
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-3200BWU2-1GBGH
Bios > Genie Bios Setting
FSB = 200
LDT/FSB Frequency = 5
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2
Trd = 2
Tras = 5
Trp = 2
Trc = 7
Trfc = 13
Trrd = 2
Twr = 2
Twtr = 2
Trtw = 3
Tref = 3684
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 4 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 6ns
Read Preamble Time = 4.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4


F1-4800DSU2-1GBFF

Bios > Genie Bios Setting
FSB = 300
LDT/FSB Frequency = 3
DRAM voltage = 2.7v

Bios > Genie Bios Setting > DRAM Configuration
MHZ = 200, 1/1
CPC = Enable
Tcl = 2.5
Trd = 4
Tras = 8
Trp = 4
Trc = 8
Trfc = 14
Trrd = 2
Twr = 2
Twtr = 1
Trtw = 2
Tref = 4196
DRAM BANK = Enable
Errate 94 = Atuo
Errate 123 = Auto
Odd Divisor = Disable
DQS = auto
DRAM Drive Strength = 1 (or best for your computer)
DRAM Data Drive Strength = 2 (or best for your computer)
DIMM 1/3 Clock Timing Skew = Auto
DIMM 2/4 Clock Timing Skew = Auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enable
R/W Queue Bypss = 16x
Bypass Max = 7x
Burst Length = 4

[nn_step]

would you mind adding one for GH?

[GSKILL TECH]

i'll try

seems like DDS 1 and DDDS 4 for GH too
memtest 80% now

[GSKILL TECH]

GH added, i am testing FF for TCCD now

[GSKILL TECH]

FF added

[manu]

i cant pass 260mhz.

[manu]

someone help me?¿

[Cornelious0_0]

I realise it's been some time since any posts were made in this thread, but it would really be great if I could get my hands on similar information for my RDX200 CF-DR. I'm having a hell of a time getting it running at 280x10 1:1 2.5-3-3-7 (it's done 310x10 1:1 2.5-3-3-7 on better cooling in another location with the same mobo/cpu/ram combo) and it's driving me crazy.

I realise that the RDX200 was kind of abandoned, but there has to be some end to my endeavor...

I'm using the F1-4800DSU2-1GBFF kit by the way.

[eXo_Ultimate]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

[cadaveca]

Well, considering the board this thread is about is for AMD SKT 939, i HOPE your ddr2 doesn't work in it...

[GSKILL TECH]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

F2-6400PHU2-2GBNS will not work on RD600. it is incompatible.

[eXo_Ultimate]

I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.

[GSKILL TECH]

Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.

f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

[eXo_Ultimate]

Thanks for your answers.Now,ı will sell the gskill memory and buy another

[Flip Trip]

Hello, I just got a cfx3200, i bought this mainboard so i could finally get everything out of my rams and cpu before i go for a new platform in a year or two.

My rams are the gskill F1-3200DSU2-GBLE, my cpu is an opteron 170.
When i put in a stick of noname ddr400 rams (512mb). I can get the cpu several hours of prime stable at 2900 mhz and 1.425 Vcore (10x290) (ldt=3).

Ive used those timings from another thread (nforce 4 thread)

DDR550
2,76V; HTT=3; FSB=275
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Cas: 2.5
Trcd: 3
Tras: 5
Trp: 3
Trc: 7
Trfc: 18
Trrd: 2
Twr: 2
Twtr: 2
Trwt: 3
Tref: 3684
Dram Bank Interleave: Enable

Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 3
Darm Date Drive Strength: 1
Max Async Latency: 9ns
Darm Response: Normal
Read Preamble Time:6ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
Burst Length 4

With those settings and the cpu running at a multi so its as close to its natural clockspeed (8) It is 10 hours memtest stable, but in windows it will crash within a minute while im prime testing (torture test in place large FFTs).

Ive tried lots of different things, losening all the timings and trying on higher lower voltages, I even tried a different cpu (Venice Core). But either it doesnt get into windows at all or prime will crash in seconds.

I hope someone is still willing to help me with this board, thx anyway.


edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in

[GSKILL TECH]

edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in

you have another pair of FF, i don't get this part

[Flip Trip]

No i just used those settings(from your first post in this thread), the main thing is that its kinda stable with one stick, but not with two.

[eXo_Ultimate]

f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.
İf it's works with 965 chipset should be works with rd600 too

[GSKILL TECH]

Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.
İf it's works with 965 chipset should be works with rd600 too

some of them are ok to run if we reprogram it. however must of them are not ok. you are lucky to get a P965 working one

[trajik78]

i cant seem to get 4 sticks fo 2gbhz working. i get "C1" LED debug code. both pairs of ram run fine alone in both the yellow and orange slots. i have set CPC to 2T. anything else i should change?