Results 1 to 20 of 20

Thread: DFi CFX3200 Bios setup for GSKILL products

  1. #1

    DFi CFX3200 Bios setup for GSKILL products

    DFi CFX3200 motherboard ONLY!
    Please install RAM into Orange Slot!


    F1-3200PHU2-1GBNS

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2.5
    Trd = 3
    Tras = 5
    Trp = 3
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4




    F1-3200PHU2-2GBNS

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2.5
    Trd = 3
    Tras = 5
    Trp = 3
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200USU2=2GBHS

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2.5
    Trd = 3
    Tras = 5
    Trp = 3
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4



    F1-3200PHU2-1GBNT

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 3
    Trd = 4
    Tras = 8
    Trp = 4
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200PHU2-2GBNT
    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 3
    Trd = 4
    Tras = 8
    Trp = 4
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200BIU2-2GBHX

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2
    Trd = 3
    Tras = 5
    Trp = 2
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 1 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200PHU2-1GBZX

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2
    Trd = 3
    Tras = 6
    Trp = 3
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200PHU2-512ZX

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2
    Trd = 3
    Tras = 6
    Trp = 3
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200PHU2-2GBZX

    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2
    Trd = 3
    Tras = 5
    Trp = 2
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-4000BIU2-2GBHV

    Bios > Genie Bios Setting
    FSB = 250
    LDT/FSB Frequency = 3
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 3
    Trd = 3
    Tras = 5
    Trp = 2
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-4000USU2-2GBHZ

    Bios > Genie Bios Setting
    FSB = 250
    LDT/FSB Frequency = 3
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 3
    Trd = 4
    Tras = 8
    Trp = 4
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 2 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-3200BWU2-1GBGH
    Bios > Genie Bios Setting
    FSB = 200
    LDT/FSB Frequency = 5
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2
    Trd = 2
    Tras = 5
    Trp = 2
    Trc = 7
    Trfc = 13
    Trrd = 2
    Twr = 2
    Twtr = 2
    Trtw = 3
    Tref = 3684
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 4 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 6ns
    Read Preamble Time = 4.5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4


    F1-4800DSU2-1GBFF

    Bios > Genie Bios Setting
    FSB = 300
    LDT/FSB Frequency = 3
    DRAM voltage = 2.7v

    Bios > Genie Bios Setting > DRAM Configuration
    MHZ = 200, 1/1
    CPC = Enable
    Tcl = 2.5
    Trd = 4
    Tras = 8
    Trp = 4
    Trc = 8
    Trfc = 14
    Trrd = 2
    Twr = 2
    Twtr = 1
    Trtw = 2
    Tref = 4196
    DRAM BANK = Enable
    Errate 94 = Atuo
    Errate 123 = Auto
    Odd Divisor = Disable
    DQS = auto
    DRAM Drive Strength = 1 (or best for your computer)
    DRAM Data Drive Strength = 2 (or best for your computer)
    DIMM 1/3 Clock Timing Skew = Auto
    DIMM 2/4 Clock Timing Skew = Auto
    Max Async Latency = 8ns
    Read Preamble Time = 5ns
    Idle Cycle Limit = 256
    Dynamic Counter = Enable
    R/W Queue Bypss = 16x
    Bypass Max = 7x
    Burst Length = 4
    Last edited by GSKILL TECH; 05-11-2006 at 03:14 PM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  2. #2
    YouTube Addict
    Join Date
    Aug 2005
    Location
    Klaatu barada nikto
    Posts
    18,441
    would you mind adding one for GH?
    Fast computers breed slow, lazy programmers
    The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
    http://www.lighterra.com/papers/modernmicroprocessors/
    Modern Ram, makes an old overclocker miss BH-5 and the fun it was

  3. #3
    i'll try

    seems like DDS 1 and DDDS 4 for GH too
    memtest 80% now
    Last edited by GSKILL TECH; 05-10-2006 at 03:13 PM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  4. #4
    GH added, i am testing FF for TCCD now
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  5. #5
    FF added
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  6. #6
    Registered User
    Join Date
    Jun 2006
    Posts
    30
    i cant pass 260mhz.
    Last edited by manu; 06-17-2007 at 06:09 PM.

  7. #7
    Registered User
    Join Date
    Jun 2006
    Posts
    30
    someone help me?¿

  8. #8
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    Saskatoon, SK
    Posts
    1,163
    I realise it's been some time since any posts were made in this thread, but it would really be great if I could get my hands on similar information for my RDX200 CF-DR. I'm having a hell of a time getting it running at 280x10 1:1 2.5-3-3-7 (it's done 310x10 1:1 2.5-3-3-7 on better cooling in another location with the same mobo/cpu/ram combo) and it's driving me crazy.

    I realise that the RDX200 was kind of abandoned, but there has to be some end to my endeavor...

    I'm using the F1-4800DSU2-1GBFF kit by the way.

  9. #9
    Registered User
    Join Date
    Aug 2006
    Location
    Turkey
    Posts
    15
    I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!
    Conreo E6400 3.2(daily)@3.8@Big Water 735 || Asus P5b || Gskill 2*1gb 6400 ddr800 || Palit 7600Gs Sonic 535@570 || Seagete 160gb sata2 || Asus Ta_210 || Nec DwdW+ ||

  10. #10
    I am Xtreme
    Join Date
    Mar 2005
    Location
    Edmonton, Alberta
    Posts
    4,718
    Well, considering the board this thread is about is for AMD SKT 939, i HOPE your ddr2 doesn't work in it...

  11. #11
    Quote Originally Posted by eXo_Ultimate View Post
    I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!
    F2-6400PHU2-2GBNS will not work on RD600. it is incompatible.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  12. #12
    Registered User
    Join Date
    Aug 2006
    Location
    Turkey
    Posts
    15
    Quote Originally Posted by eXo_Ultimate View Post
    I have F2-6400PHU2-2GBNS memory but it didn't works with rd600.I uptade the new bios but it's still not works.Please help me !!
    Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.
    Conreo E6400 3.2(daily)@3.8@Big Water 735 || Asus P5b || Gskill 2*1gb 6400 ddr800 || Palit 7600Gs Sonic 535@570 || Seagete 160gb sata2 || Asus Ta_210 || Nec DwdW+ ||

  13. #13
    Quote Originally Posted by eXo_Ultimate View Post
    Mine board is Intel ICFX3200-T2R/G Rd600.Not socket 939,it's intel 775 socket.Why gskill memory didn't works with board? ı don't know that before ı bought it.
    f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  14. #14
    Registered User
    Join Date
    Aug 2006
    Location
    Turkey
    Posts
    15
    Thanks for your answers.Now,ı will sell the gskill memory and buy another
    Conreo E6400 3.2(daily)@3.8@Big Water 735 || Asus P5b || Gskill 2*1gb 6400 ddr800 || Palit 7600Gs Sonic 535@570 || Seagete 160gb sata2 || Asus Ta_210 || Nec DwdW+ ||

  15. #15
    Registered User
    Join Date
    Apr 2007
    Posts
    2
    Hello, I just got a cfx3200, i bought this mainboard so i could finally get everything out of my rams and cpu before i go for a new platform in a year or two.

    My rams are the gskill F1-3200DSU2-GBLE, my cpu is an opteron 170.
    When i put in a stick of noname ddr400 rams (512mb). I can get the cpu several hours of prime stable at 2900 mhz and 1.425 Vcore (10x290) (ldt=3).

    Ive used those timings from another thread (nforce 4 thread)

    DDR550
    2,76V; HTT=3; FSB=275
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 2.5
    Trcd: 3
    Tras: 5
    Trp: 3
    Trc: 7
    Trfc: 18
    Trrd: 2
    Twr: 2
    Twtr: 2
    Trwt: 3
    Tref: 3684
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 3
    Darm Date Drive Strength: 1
    Max Async Latency: 9ns
    Darm Response: Normal
    Read Preamble Time:6ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    Burst Length 4

    With those settings and the cpu running at a multi so its as close to its natural clockspeed (8) It is 10 hours memtest stable, but in windows it will crash within a minute while im prime testing (torture test in place large FFTs).

    Ive tried lots of different things, losening all the timings and trying on higher lower voltages, I even tried a different cpu (Venice Core). But either it doesnt get into windows at all or prime will crash in seconds.

    I hope someone is still willing to help me with this board, thx anyway.


    edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in
    Last edited by Flip Trip; 04-13-2007 at 05:37 AM.

  16. #16
    Quote Originally Posted by Flip Trip View Post

    edit: seems like they both run alone at the settings mentioned above (F1-4800DSU2 1GBFF) (at least 10 min prime stable). But it wont even start if i put them both in
    you have another pair of FF, i don't get this part
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  17. #17
    Registered User
    Join Date
    Apr 2007
    Posts
    2
    No i just used those settings(from your first post in this thread), the main thing is that its kinda stable with one stick, but not with two.
    Last edited by Flip Trip; 04-13-2007 at 04:32 PM.

  18. #18
    Registered User
    Join Date
    Aug 2006
    Location
    Turkey
    Posts
    15
    Quote Originally Posted by G.S Technician View Post
    f2-6400phu2-2gbns is only compatible with P975, P955 and P945 P925 ... those. not AM2, RD600, Nvidia and P965

    Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
    with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.
    İf it's works with 965 chipset should be works with rd600 too
    Conreo E6400 3.2(daily)@3.8@Big Water 735 || Asus P5b || Gskill 2*1gb 6400 ddr800 || Palit 7600Gs Sonic 535@570 || Seagete 160gb sata2 || Asus Ta_210 || Nec DwdW+ ||

  19. #19
    Quote Originally Posted by eXo_Ultimate View Post
    Now; ı remembered that ı used my gskill memory (f2-6400phu2-2gbns )
    with asus P5b.I used with 6400 3.9 ghz. P5b is 965 chipset so ı used it.You said that it's incompatible.
    İf it's works with 965 chipset should be works with rd600 too
    some of them are ok to run if we reprogram it. however must of them are not ok. you are lucky to get a P965 working one
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  20. #20
    Registered User
    Join Date
    Oct 2005
    Posts
    34

    CFX3200 & 4 sticks of 2GBHZ

    i cant seem to get 4 sticks fo 2gbhz working. i get "C1" LED debug code. both pairs of ram run fine alone in both the yellow and orange slots. i have set CPC to 2T. anything else i should change?
    E6420 @ 3.2gHz
    Asus P5K Deluxe
    2GB OCZ DDR2-1066 Platinum
    Powercolor HD 2900XT
    OCZ 700W Gamexstream

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •