166x11 1.85Vcore Abit NF7-S JIUCB stepping
shuts off and i get sirens. really gay!
166x11 1.85Vcore Abit NF7-S JIUCB stepping
shuts off and i get sirens. really gay!
heat?
All along the watchtower the watchmen watch the eternal return.
Well, there's a number of things it could be. Ranging from heat, bad voltage line, even down to a bad floppy causing it. Will it run ok at lower speeds?How much have you raised the vcore? Is your agp/pci locked or in synch?
what kind of temps do you get at stock speeds?
*edit* are you sure it's your chip? my XP1800 JIUCB can loop 3DMark and run F@H for hours at 1.625v.
Last edited by felix88; 02-14-2003 at 07:16 PM.
RMA the board
| Intel i7 3770K | Custom H2O | Gigabyte z77x-ud5h | 16GB Samsung | GTX680 | 240g Mushkin Deluxe |
-METALLICA-
This is a bit drastic - before rma'ing a board I would try *another* chip and see...he may have gotten a bad one - those are cheap so he might just get another one and sell the 1700 - personally I would go with the 2100 B but YES it is more expensive...Originally posted by DisposableHero
RMA the board
What are the temps?
--fibo
Epox 8RDA3G+ v2.0
AXP 2100 "B" (11.5 x 200fsb) - 2.3GHZ
ATI Radeon XT800 XT (Omega Cat 5.8)
3x512MB Corsair XMS 3200 3-2-2-5 @ 2.77v
SLK-800 w/ SmartFan II
Windows XP Pro w/ SP1
2 Seagate Barracuda 120GB 7200rmp 8MB
1 LiteOn CD/RW - 1 Pioneer DVD
Anix Platinum XP Case modded
i had that siren bull§§§§ with my 8rda... not a fun problem... no matter what wouldnt allow higher vcore than 1.85 ... i rmaed and got a great board
| Intel i7 3770K | Custom H2O | Gigabyte z77x-ud5h | 16GB Samsung | GTX680 | 240g Mushkin Deluxe |
-METALLICA-
What stepping proc? Mine is running default voltage @ 11.5 x 166 right now.
1700+, 8RDA+, TwinMOS BH-5, ATi 9800 Pro, WD 100GB 8mb, Antec TruePower 430w, Black Chieftec Dragon
just wondering how well does the Xp1800+ T-bred B overclocks Felix88??
Athlon Xp1700+ T-bred @ 2.376ghz JIUHB0302
EPOX 8K3A @ 200
512mb GEIL DDR333 ultra
PNY Verto Geforce4 Ti4400
Adaptec ASR2100S SCSI RAID 64mb cache
3x18.2gb 10k_RPM Fujitsu MAN3184MP SCSI HDD
Yes some Tbreads B are POS and they alway will be...sel it and get another new 0304 chip...they do 2100mhz on air with 1.7V.
Out of about 15 Tbreads 3 of them are POS not the spepping but the OC...they just cant do it..
Bookmarks