I WOULD LIKE TO GET A NEW MOTHERBOARD
WHAT IS BETTER AND CAN SUPPLY ME WITH MORE FSB?
I WOULD LIKE TO GET A NEW MOTHERBOARD
WHAT IS BETTER AND CAN SUPPLY ME WITH MORE FSB?
I think it really depends on what other components you have, like what kind of ram and one of the more important fact is, *tada*, LUCK.
Some are getting high FSB without any mods, some are getting low fsb even with VDD sets to 2.0v.
Just get something you want, I mean both boards are great, just what kind of features and price you see fit.
For me, my Asus A7N8X is doing fine without any mods, running @211fsb and benchable @220 fsb, lucky
3dmark@220fsb, http://service.futuremark.com/compare?2k1=5797552
starck
Last edited by starck; 02-14-2003 at 02:36 AM.
my system is:
abit nf7 / 8rda+ i didnt dicide yet
and geil/kingston didntdicide yet
w/ amd 2100+ t-bred rev. b
AXP 1800+ DLT3C /Cooled by Thermalright SLK-900A w/ TT Smart blue fan 80mm
Epox 8RDA+ REV 2.2 - extra stable
OCZ Preformance Rev.2 256x2 - BH-5
WD 80G 8CACHE 7200RPM
Yamaha MS50
Gigabyte 9600Pro - soon to be replaced by 6600GT
MAG 796FDII Diamantron
I'd suggest, if you wanna buy now, get the 8rda+, if you can wait a week or two, the NF7-S rev 1.2 mentioned in this post, http://www.xtremesystems.org/forums/...&threadid=9731 , seems to be a great board.
As for the ram, people here have had great results using Kingston HyperX and Corsair XMS.
starck
I hope the new revision Abit stomps the Epox into the ground. I hate the preparation required to do any decent FSB speeds with it (most people reporting the 185 - 205mhz FSB range).
Set me free.
A64 3200 @ 2250mhz (10x225 @ 1.6v) | Chaintech ZNF3-150 | 2x 256mb Corsair 3200LL TwinX @ 2.5-2-2-7-12-16 | 256mb Albatron 5950 VIVO | 80gb DiamondMax 9 | Pioneer 106 | APC 2200RMI3U UPS
Another board to consider may be Epox 8RGA+
VDD upto 2.0v
And you can run 2.2v on the Vcore as it has new Votlage regulation (powered by 12v line)
I had one running a unlocked duron (all I had at the time) upto 220fsb with 1.8 VDD
not many boards out there yet, but soemthing to look out for.
yeah, if you can wait just a little bit, there seems to be boards with great potential about to be released by both Epox and Abit. This is mainly because of the ability to adjust the vdd without mods.
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
Originally posted by Holst
Another board to consider may be Epox 8RGA+
VDD upto 2.0v
And you can run 2.2v on the Vcore as it has new Votlage regulation (powered by 12v line)
I had one running a unlocked duron (all I had at the time) upto 220fsb with 1.8 VDD
not many boards out there yet, but soemthing to look out for.
LOL 2v @ vdd is bull§§§§.
Tbred B 1733@2575 | Swiftech MC462-A | 512mb Corsair PC3500 | Epox 8RDA+ 1.1 + vdd mod| ATi Radeon 9700 @ pro| Soundblaster Audigy | Antec 400Watt@RIP :'( | WC is coming! | 18780 3dmarks
8RDA3+ baby...
http://www.elito-epox.com/produkte/p...oards%20-%20SA
You'll know more soon
Hey Mickey those are some kickass benchmarks' bro. I really will have almost the exact same setup as you. Except the Graphics Card. which I'm upgrading to a R350 when available. Wow though man, I'm excited to get the rest of my hardware to do benchmarks'. Congrats though. You make me anxious.
AMD Barton 2500+ @ 3200+ (2.2ghz)
Abit NF7-s v2.0
1gb // OCZ PC-3500 El DDr
Sapphire ATi Radeon 9800Pro (4.7s) @ 407/720
WD800JB x2
Audigy-2
Antec Truepower 550w
Whats up with running 2v VDD ? im at 2v 24/7Originally posted by Soldier2000
LOL 2v @ vdd is bull§§§§.
Bookmarks