kayl doesnt have any customers, not that many xtreme ppl in australia, only a hand full do phase, most just into water cooling
I have a bunch of finished units though ready to sell
thanxs walt
http://advancedpccooling.com.au/foru...topic.php?t=17
kayl doesnt have any customers, not that many xtreme ppl in australia, only a hand full do phase, most just into water cooling
I have a bunch of finished units though ready to sell
thanxs walt
http://advancedpccooling.com.au/foru...topic.php?t=17
Decided to replace the 1/2hp compressor with a rotarty the other night, now running 1hp first stage and a ½-3/4hp rotary on the second stage. R290 first stage 1150 second stage. First charge for the night she hit -105c and loaded with 312w doing -91c. With the bigger compressor my static charge second stage went from 150psi to 280psi so lets hope she handles quad core. Will do final insulation tonight and clean up the wiring, then do final tunning on the quad core
Got to love the smoke that comes off the accumulator when you first start the second stage.
Last edited by kayl; 07-26-2007 at 07:17 PM.
That I'll get it. Same B chip?
Great temps Kayl bet your quad loves it .
lol my cats going crazy over the smily faces on this page hehe...she is attacking the monitor lol..sorry for the lame post but i cant stop the CAT...
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
Last edited by kayl; 08-07-2007 at 04:43 PM.
Do you need some heatshrink?
If you have a cooling question or concern feel free to contact me.
Bench away baby so you can move onto your next Project
Kayl you should of posted a pic of that thing Boxed up
Its bloody Huge...from Sydney send it to Queensland and i can give a test run eheh..
Cheers Hori
Asus COMMANDO -Intel Q6600 @ 3.6Ghz 401x9 have sum test @ 445x9 4GHZ :-)
2x74 Gig Raptors Raid 0..GSKILL 6400 2x1Mb matchd Pair.-OCZ 550w Powerstream adjustable rails- XE2 Vapochill -pioneer Dvd.-2x160 Gig Hitachi ide drives..-Asus 7600 gs video card
http://www.hwbot.org/user.do;jsessio...C3?userId=8636
hey kayl! Nicely done! is that your first cased Cascade? it looks great man. That green sleeving looks familiar hey
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
Hey, you didn't told me you got it running already
BTW, I did a joke in the display custom text, KAYL TROLO means KAYL GAY
HAHAHAHA Nice Ssilencer! and VERY nicely done with the cascade controller! I may pick one of those up in the not so distant future
Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram
IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]
Is it a coincidence that your wifes pc is called Uranus?
Last edited by Ssilencer; 08-07-2007 at 12:33 PM.
Hey Fhqwhgads6680, this is my second professional cascade, but I have been making getto cascades for the last 2 years. Green is my favourite sleeving also, looks good on my bench cascade I think the controller finishes the cascade though.
You bugger, once I set the pc up on top of the cascade ill have to change the text menus Yeah I was up to 2am last night finishing it all off and putting it all together. I also installed the gfroster XE1.6 into another unit I have here, no issues this time round with bad character display, or tripping on start-up.
The XE 2.0 K type thermocouple controller works perfect in my cascade. The cascade controller didn’t quiet do what I needed (no windows software)
I have set the cascade so that once the first stage compressor reaches -25c 30cm before the compressor the second stage compressor starts. I also have a High pressure cutoff on the second stage. If first stage 30cm before the compressor ever gets warmer than -25c the second stage will shut down.
I also have a switch on the second stage to turn it off if need, will come in handy with benching. With the XE 2.0 windows software ill be able to do some nice window dumps for benching, look good on HWBOT.
Last edited by kayl; 08-08-2007 at 10:44 PM.
Nice to see the asus p5k serial is compatible.
So you were playing with the "custom text screens"
Nice results also!
Last edited by kayl; 09-03-2007 at 04:16 AM.
OMG! They say sex is a short-term selling technique but **** me its hard to say no to that cleavage!
Oh yea..the results...congrats!
Kudos for concentrating AT ALL given those booth babes
Did they actually care about the computer and help ya set up/OC etc or were they just eye candy?
if its the former, as well as the CPU tube please can ya get their numbers for me?
nice work kayl as alway
i could do with a little help my self
hahahahahaah awsome, nice run bro!
3dmark addict
phase-change addict
dirty benching addict
tits lover
I gotta say, those are some of the best booth babes I've seen.
Bookmarks