hey grayskull you are still alive, good to see you!!
Okay, primesstable for 4hours+ going to change to F@H now while im at work!
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
oh dont wanna be at work. want to go home and tweak more... try async 8. oh sleep a little would be sweet too, 4hours aint enough.
Ok Back in testing mode.
little more info about 133divider. It seemes it doesnt like the low speed on my ram with htt @ 200 or something, but if i set htt to 295(my rock stable setting) and then reboot and change to 133 it workes!
Hm tried 8 async but prime doesnt even fail @ 315, the machine just freezes... so that didnt help.
Lowerer multi to 8 and now im trying again. seemes more stable now...
Edit: Priming for long time now as i lowered multi to 8. is it just my cpu wich is holding med back????
Edit2: *slapss my forhead* daam, i primed at 295htt, forgott to upp to 315....
Edit3: well seemes stable at 315htt too... is it my cpu then?
Edit4: 320htt seemed stable too, just took a chance and went straight for 330htt...
Edit5: Well priming 340htt now... seemes like ive got some issuse with my cpu then... *depressed*
Edit: system froze @ 340htt. think ill call it a day. need sleep!
Last edited by eXa; 10-30-2006 at 06:46 PM.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
ok. trying with more voltage on the cpu now. lets see if its stable @ 315htt now!
Edit: Okay so a little more voltage was all that i needed. primed for an hour now. will try 320htt now!
Last edited by eXa; 11-01-2006 at 07:54 PM.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
What does "Dll disable" do?
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
Okay, im stuck. been testing 325htt all night but no matter what i do i cant get it stable.
When u start priming it starts with 1024k FFT length and then moves on to 8k
but 1 core (the same) always fail in the first minute in the 8k FFT lenght test.
Ive tried alot but nothing makes a difference. Using 1.5v now.
Cant my cpu do even 2.9ghz? anyone got any idea?
Priming 320htt now just to really check if its stable there...
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
My 165 peaks at 318X9 not a mhz higher no matter what I try.
Gigabutt X58 OC F3 Bios
Xeon 5680 200x21@1.34V.Vtt 1.295V.
3x4 gigs Samsung 2Ghz 10,11,10,31@1.5V.
3xSapphire 5870
PCPC 950watt
what stepping? im going to try with more voltage to see if its that it wants. used 1.5v last time i tried. but think maybe i need to improve cooling. really weak pump!
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
Ccb1e 0609 Fpmw
Gigabutt X58 OC F3 Bios
Xeon 5680 200x21@1.34V.Vtt 1.295V.
3x4 gigs Samsung 2Ghz 10,11,10,31@1.5V.
3xSapphire 5870
PCPC 950watt
Startet testing a bit more. Seemes like my cpu just hit a wall and refuses to move on. trying to get 325 stable but it wont. Trying with 1,56v now. Maybe its heat that does it? Core temp shows 53c on core 0 and 65c on core 1 interresting enough, its always core 0 who fails. It fails in 8k length on prime95
Man, start to really belive that this cpu needs to strip! so big difference between idle and load!
hope a new pump gives me some better temps!
Last edited by eXa; 11-08-2006 at 02:03 PM.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
i give up... atleast for now!
setteling with 320htt. Using a64info to get the right ram speed (150divider\240fsb) Maybe if i buy a ddc-2 petra and storm later, ill try more!
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
i really would love to have that 150divider in the bios.. it's a really big step without it
Yeah!
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
Okay i just found out that my booting issue above 315HTT was not because of high HTT but rather because that i changed ramdivider to 133... does anybody have any idea of why my rig doesnt like running 133 divider?
hmm trouble with 133 u too? tried tref?
Edit: Tref should match divider. default is 200 7,8 so i tried 133 7,8 but had to use 133 15,6....
Last edited by eXa; 11-13-2006 at 12:12 PM.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
hmm, will try that later... but why can't anybody just add a 150 divider into the bios
dont wait for it from sapphire atleast. And i think grayskull is kinda almost finnished with 939 and all over am2 but i dont know!
It aint like dfi where u get a new bios every week!
i kinda settled with it. Almost never turn of my computer so i can live with it. Just use A64info to tweak the last bit after i started up....
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
1.48GHz HT Link so far...Originally Posted by Grayskull
damn 1.6Ghz... way to fast
AM2 Crossfire
150 divider IS possible with the AMI bios.. i mailed Tony about this and he gave me the answer... just select the 166 divider, and then under the ram settings put the option "Odd Divisor Correct" to enabled, and then you will be running on the 150 divider.. the bios at boot will still say it's 166 running, but if you check your ramspeed with cpu-z or so, then you will se the right speed.Originally Posted by eXa
Running 330x9 stable now
Here you can find the dump - http://valid.x86-secret.com/show_oc?id=138783
Last edited by Rolle2k; 11-16-2006 at 10:34 AM.
Woot!
is that whats its for! nice!
do you know wich speed i get with the other dividers?
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
I actually have no idea... but this was really great for me.. as the 133 divider wouldn't boot for me then i could run 2.8GHz at max (if i didn't want to run the rams on the 100 divider)..
Very nice!Originally Posted by Rolle2k
Thank you very much for that info
I would be more active here if it wasn't for my defect RAM wich has a tendency to corrupt and rape my disk..
Keep OC'ing
Mb: Abit IX38QuadGT Cpu: Core2Duo E6850 Gfx: HD4870X2 Ram: CrucialBallistix 2x1GB Case: Gigabyte3DAurora Psu: Corsair620W
Ah nice, enabled odd diversor corect and bumped the htt a bit. works like a charm. just like 150divider.
X2 555 @ B55 @ 4050 1.4v, NB @ 2700 1.35v Fuzion V1
Gigabyte 890gpa-ud3h v2.1
HD6950 2GB swiftech MCW60 @ 1000mhz, 1.168v 1515mhz memory
Corsair Vengeance 2x4GB 1866 cas 9 @ 1800 8.9.8.27.41 1T 110ns 1.605v
C300 64GB, 2X Seagate barracuda green LP 2TB, Essence STX, Zalman ZM750-HP
DDC 3.2/petras, PA120.3 ek-res400, Stackers STC-01,
Dell U2412m, G110, G9x, Razer Scarab
Bookmarks