I am alive!
If anyone wants anything please contact me on my mail. It is easier to check it with my mobile phone.
Cheers!
I am alive!
If anyone wants anything please contact me on my mail. It is easier to check it with my mobile phone.
Cheers!
I don't know, I'm an electronics guy.
Back in business!
more more
can i get one set of Freeze Pack Controller unseen......
looks like same as i have from jinu 2006 in my unit
my unit is starting up before the set boot up temp set at -35c or any setting i program, its running good the delay timer working on shut down 4 minutes, it just starts to soon
thanks
Last edited by eagle101; 09-23-2011 at 07:20 PM.
If not reply you can find UNSEEN or GSMASTER here http://www.outofspecs.gr/
混沌とした アンモラル
Does anyone have the software and firmware for a Freeze controller basic v0.5?
Hello,
Email alerts sometimes bring you back to the past. :P
I have everything, if I search a little I will surely find them.
Why you need a firmware for? what is the problem of your unit? I cant send you the firmware, but I can send you a programmed chip for your unit.
I don't know, I'm an electronics guy.
Back in business!
small updates are done in firmware, regarding minor bugs, and some features like delay to restart the unit, cancel-able delays, etc. which firmware you have exactly? when the controller powers up it shows it for a while.
In the software there is not any update at all.
I have not been playing with these for the last 5 years, except a board redesign about 3 years ago, in a time I had a lot of free time to spent.
I don't know, I'm an electronics guy.
Back in business!
I have Dr Frosty 1.5 which says firmware version 1.0
I can connect to the software and monitor my EVAP temp but none of the other features like fan speed, display info and the other options don't work.
Was the software ever able to change of of this stuff or has it never worked?
The software is an initial version of something that unfortunately never finished. So I'm pretty sure you have the latest version of the software.
The firmware version is displayed on the controller's lcd when this powers up.
I don't know, I'm an electronics guy.
Back in business!
You can control them directly from the menu on the controller, not from the software.
I don't know, I'm an electronics guy.
Back in business!
Just thought, how accurate are the temps on this controller?
Got the thermal probe as close to the base of the EVAP as possible and was wondering if the readings are accurate or if they're off by some margin.
Asus Crossfire IV Extreme
AMD FX-9590 @ 5.85Ghz
Dual Powercolor HD 7990's in Quadfire
Triple HP ZR30w 30" monitors (7680X1600 resolution)
LSI 9265-8i Raid Controller w/CacheCade 2.0 & FastPath
Intel RES2V240 SAS Expander
ATI 650 PCIe Combo Dual TV Tuner
SIIG Pro 4 port PCI Serial Comm Card
4X4GB G.Skill DDR3 PC2133
(8) OCZ Vertex 4 256GB SSD's Raid 0 Boot Drive
(4) OCZ Vertex 4 256GB SSD's CacheCade Drive
(12) HGST 3TB 7200RPM HDD's Raid 5 Data Drive
EKWB FC7990 Video Water Blocks
-52c SS Phase Change
Koolance HD & Memory Liquid Cooling
Koolance Pumps/Resevoirs & XSPC Radiators
Mountain Mods Exteneded Ascension CYO
Xlcio 1200W Power Supply
450W Video Card Power Supply
12V & 24V Fan and Water Pump Power Supplies
http://valid.canardpc.com/2601008
http://3dmark.com/3dm11/3024831
http://www.techpowerup.com/gpuz/5zc7g/
Mines up for sale on eBay..
http://www.ebay.co.uk/itm/1109391938...9#ht_534wt_922
Bookmarks