Results 1 to 21 of 21

Thread: DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

Threaded View

  1. #1
    G.Skill USA Tech
    Join Date
    Sep 2005
    Posts
    2,089

    DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

    TIMING FOR DFI ULTRA-D SLI-D; SLI-DR ONLY

    F1-4000USU2-2GBHZ
    2.5-2.7V; HTT=3; FSB=250
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 3
    Trcd: 4
    Tras: 8
    Trp: 4~3
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 7~8ns
    Darm Response: Normal
    Read Preamble Time: 5ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-4000BIU2-2GBHV
    2.6-2.7V; HTT=3; FSB=250
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 3
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 6~7ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-3200BUI2-2GBHX
    2.6-2.7V; HTT=5; FSB=200
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 2
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 5~6ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-3200PHU2-2GBZX
    2.6-2.9V; HTT=5; FSB=200
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 2
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 5~6ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable
    Last edited by GSKILL TECH; 04-04-2006 at 09:31 AM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •