Results 1 to 21 of 21

Thread: DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

  1. #1

    DFI NF4 None Expert Series Bios Timing F1-2GBHZ; F1-2GBHV; F1-2GBHX; F1-2GBZX

    TIMING FOR DFI ULTRA-D SLI-D; SLI-DR ONLY

    F1-4000USU2-2GBHZ
    2.5-2.7V; HTT=3; FSB=250
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 3
    Trcd: 4
    Tras: 8
    Trp: 4~3
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 7~8ns
    Darm Response: Normal
    Read Preamble Time: 5ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-4000BIU2-2GBHV
    2.6-2.7V; HTT=3; FSB=250
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 3
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 6~7ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-3200BUI2-2GBHX
    2.6-2.7V; HTT=5; FSB=200
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 2
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 5~6ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable

    F1-3200PHU2-2GBZX
    2.6-2.9V; HTT=5; FSB=200
    Dram Frequency Set: 200 (1:1)
    Command Per Clock: Enable (1t)
    Cas: 2
    Trcd: 3
    Tras: 6
    Trp: 2
    Trc: 7
    Trfc: 13~18
    Trrd: 2
    Ter: 2
    Twtr: 1~2
    Trwt: 2~3
    Tref: 3684
    Twcl: 1
    Dram Bank Interleave: Enable

    Dqs Skew Control: Auto
    Dqs Skew Value: 0
    Dram Drive Strength: 7 (or Best Value For Your System)
    Darm Date Drive Strength: 3 (or Best Value For Your System)
    Max Async Latency: 5~6ns
    Darm Response: Normal
    Read Preamble Time: 4ns
    Idlecycle Limit: 256
    Dynamic Counter: Enable
    R/w Queue Bypass:16
    Bypass Max: 7
    32 Byte Granularity: Disable
    Last edited by GSKILL TECH; 04-04-2006 at 10:31 AM.
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  2. #2
    Registered User
    Join Date
    Apr 2006
    Location
    Philippines (currently in the Middle-East) TPC Pisyong™
    Posts
    136
    Hi There G.S. Tech...

    I would really appreciate if you can post some timing with the G.Skill 1GBFX Extreme Series mems for my DFI Expert Mobo. Pleassse.....

    Thanks and Regards!

  3. #3
    Registered User
    Join Date
    Mar 2006
    Posts
    3
    hi need help tuning my bios, how to optimised the ram section nicely...

    here's my specs

    Amd64 Opteron 165
    DFI N-force 4 Ultra-D
    2GB (1gb x 2 )Gkill F1-4000 PC4000
    XFX GeForce 7900GT EX ED
    Creative X-Fi Xtreme Music
    160GB WD HDD and 80GB WD HDD

    thanks in advances

  4. #4
    Xtreme Enthusiast
    Join Date
    Jan 2005
    Location
    Italy
    Posts
    960
    Nice!
    Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE

  5. #5
    Xtreme Addict
    Join Date
    Nov 2005
    Location
    Mansfield TX
    Posts
    1,724

    DFI Expert

    Will there be some timings for the DFI Expert, I can't even get stock out of mine
    Praetor
    » Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
    » Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM

    The Yamato
    » Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
    » Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »


  6. #6
    Registered User
    Join Date
    May 2006
    Posts
    46
    Can anyone post the OCs with DFI SLI-DR Venus and UCCCs?
    And the settings used, thanks.

  7. #7
    Registered User
    Join Date
    May 2006
    Posts
    46
    Quote Originally Posted by The Nemesis
    Will there be some timings for the DFI Expert, I can't even get stock out of mine
    Try DDS 3,4 or 7 and DDDS 1, the other settings are the same that ultra-d.

  8. #8
    Registered User
    Join Date
    Sep 2006
    Posts
    3
    I have the Expert board too and can't find the timings. I have the F1-2GBHZ and can't find settings for the memory anywhere.

  9. #9
    Xtreme Member
    Join Date
    Mar 2006
    Location
    Arcadia, CA
    Posts
    166
    G.S Technician,

    Just want to say thanks. The settings for F1-4000USU2-2GBHZ work great for my Ultra-D.


  10. #10
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    198
    anyone has the settings for DFI venus and DDR400 2GBHS ?

    i am seriously out of ideas. shld i be using dram settings for the rams or venus' ddr settings?
    where can I find a AMD phenom keychain?

  11. #11
    venus should use 3-1 for DDS and DDDS
    rest timing is about the same
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  12. #12
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    198
    Quote Originally Posted by G.S Technician
    venus should use 3-1 for DDS and DDDS
    rest timing is about the same
    same as in same settings as the 2GBHZ ?

    sorry can u explain what u mean 3-1 ? i dont quite get it
    where can I find a AMD phenom keychain?

  13. #13
    Quote Originally Posted by Emperor
    same as in same settings as the 2GBHZ ?

    sorry can u explain what u mean 3-1 ? i dont quite get it
    Dram Drive Strength: 3
    Darm Date Drive Strength: 1
    recommend for Dfi venus
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

  14. #14
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    198
    Quote Originally Posted by G.S Technician
    Dram Drive Strength: 3
    Darm Date Drive Strength: 1
    recommend for Dfi venus
    so other timings are the same as GBHZ's ?
    where can I find a AMD phenom keychain?

  15. #15
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    198
    Quote Originally Posted by Emperor
    so other timings are the same as GBHZ's ?
    ?????????????????
    where can I find a AMD phenom keychain?

  16. #16
    Xtreme Addict
    Join Date
    Nov 2004
    Posts
    2,187
    F1-4000USU2-2GBHZ is UCCC, right?

  17. #17
    Xtreme Member
    Join Date
    Mar 2006
    Posts
    198
    Quote Originally Posted by KoHaN69
    F1-4000USU2-2GBHZ is UCCC, right?
    yes
    where can I find a AMD phenom keychain?

  18. #18
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,375
    for the ZX

    Dram Data Drive Strength =

    u mean level 3 ??

    and Dram drive strength = 7
    those numbers are not present in the 704-2bta tony bois

    thanks for the very helpful thread
    Soon to be :
    ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410

    Used to be: SaFrOuT

  19. #19
    Xtreme Member
    Join Date
    May 2006
    Location
    Slovakia Europe
    Posts
    119
    Can anyone post best timing for

    F1-4000USU2-2GBHZ


    I have DFI LP UT NF4 SLI-DR EXPERT thanks
    // E6600@3900~1.5v // Asus P5K DLX //A-DATA 2GB EE // Samsung F1 1TB // ASUS X1900XTX~735/1680 // Corsair HX520 // Thermaltake Armor VA8000SWA // W. COOLING ~ D-Tek FuZion & Viscool V3 GPU & Swiftech MCP655 & 2x Swiftech MCR-320QP //

  20. #20
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,375
    can u change ur avatar first :P

    beside the timings are listed first thing in this thread
    Last edited by Okda; 04-08-2007 at 09:17 AM.
    Soon to be :
    ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410

    Used to be: SaFrOuT

  21. #21
    Quote Originally Posted by SharkerSk View Post
    Can anyone post best timing for

    F1-4000USU2-2GBHZ


    I have DFI LP UT NF4 SLI-DR EXPERT thanks
    DFI LP UT NF4 SLI-DR EXPERT

    most the timing are the same but
    Dram Drive Strength and Dram Date Drive Strength you need to find out by yourself
    Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products

    Check out our items on NewEgg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •