DDR2 Full Specs

[yotomeczek]

Crucial PC6400 Ballistix uses Micron D9 Fatbodies chips for sure......


Can do (with a fast test - not search it for more YET) Cpu-z Validated, 400MHz(800MHz DDR) at Cas 3 - 2 - 2 - 1 and fast settings....

I have reached them up to 408MHz till now with those settings and climbing....


EDIT: Get them now where are still in stock coz afterwords it will be too late.... I'll get another pair for sure just to have backups.....

What mobo and Vddr ??

[hipro5]

What mobo and Vddr ??

Gorillakos setup - AOpen + Yonah T2600 ES.....at ONLY 2.55Vdimm with 3:5 .......


http://valid.x86-secret.com/show_oc.php?id=92068


.

[yotomeczek]

Gorillakos setup - AOpen + Yonah T2600 ES.....at ONLY 2.55Vdimm with 3:5 .......


http://valid.x86-secret.com/show_oc.php?id=92068


.

Thanks

Anybody compared performace on AOpen + Yonah T2600 - 2x512 vs 4x512 vs 2x1024 vs 4x1024 ??

[Waus-mod]

help haha

what could these ic's be.. not that i dont know there not really oc sticks.. but still like to know and what there capable of.

2x1gb pc4300 c4

[overcrash86]

PDC21G5600+XBLK aren't D9

http://wowgame.free.fr/RAM/Patriot%2...non%20D9-2.jpg
http://wowgame.free.fr/RAM/Patriot%2...%20syncmax.jpg

http://wowgame.free.fr/Pentium%20D%2...1%20core-2.JPG

[The Stilt]

Dammit, my old Corsair 5400UL sticks run like a bat out of hell on this D975XBX "Bad Axe" motherboard

My old record was done on Asus P5WD2 Premium, and the sticks maxed out at 481MHz 4-2-2-2 / 2.65V (SuperPI 1M stable).

On Bad Axe they are 3d stable atleast 469MHz 3-2-2-1 with less voltage (2.5V).

3DMark2001 loves the bandwidth

[Sentential]

overcrash86 you have Micron B6
Waus-mod your ram is an Elpida Strain

[hipro5]

overcrash86 you have Micron B6
Waus-mod your ram is an Elpida Strain

I think that they have both the Elpida chips.....

[Astral7]

Has anyone tried these G.Skill?

PC2-8000 at 4-4-4-5 looks great!

[overcrash86]

I think that they have both the Elpida chips.....

Maxed out at 512Mhz with 2.4v :

http://wowgame.free.fr/Pentium%20D%2...%2028.313s.jpg

same with any others timings (5-6-6-x for exemple)

[overcrash86]

really strange :

look the vdimm without any cooling :

http://wowgame.free.fr/Pentium%20D%2...32M%20ok-2.jpg

[Sentential]

I think that they have both the Elpida chips.....

I think you might be right. B6 does look alot like elpida but what sets them apart is the capped ring around the edge of the IC itself. You can clearly see it in the first picture and not in the second which is why I thought it might be B6

However if he is only getting 500 @ 2.4v that is definatly *not* B6

[overcrash86]

475Mhz 2.15v no cooled

450Mhz 1.9v no cooled

can i up the vdimm with the elpidia at 2.5-2.6v ?

[pscout]

I just bought a couple of kits of this:

BALLISTIX DDR2 512/1024/2X512/2X1024 - 8000 1000@5-5-5-15 2.2V Micron B6-3

It hasn't arrived yet so I am assuming it is the new B6-3

I will be putting it on a p5wd2 with a 920 or a 930 (depends how my latest cheap 920 OC's)

I am wondering how well this B6-3 stuff responds to increased vddr? similarly to D9 fatbodies?

I have several other D9 fatbody 1 gb kits on other folding rigs (mushkin 6400, corsair 5400 ul, ocz 4200eb?) but have never done any vddr mods.

I am thinking i might want to mod my p5wd2, -p and -E's to take better advantage of these. They are all folding rigs and are 724.

Any comments?

Thanks

[yotomeczek]

Dammit, my old Corsair 5400UL sticks run like a bat out of hell on this D975XBX "Bad Axe" motherboard

My old record was done on Asus P5WD2 Premium, and the sticks maxed out at 481MHz 4-2-2-2 / 2.65V (SuperPI 1M stable).

On Bad Axe they are 3d stable atleast 469MHz 3-2-2-1 with less voltage (2.5V).

3DMark2001 loves the bandwidth

any orb link for 64k in 2001 ?

[zbogorgon]

Gorillakos setup - AOpen + Yonah T2600 ES.....at ONLY 2.55Vdimm with 3:5 .......


http://valid.x86-secret.com/show_oc.php?id=92068


.

Hipro, need your help, i have come across of some Balistix 6400, i am quite sure they are D9, but they just don't perform as D9s.
I have Aopen i975Xa-YGD, with vdimm, so is there possibility that VTT isn't set correctly. I know you have done this mod.

[hipro5]

Hipro, need your help, i have come across of some Balistix 6400, i am quite sure they are D9, but they just don't perform as D9s.
I have Aopen i975Xa-YGD, with vdimm, so is there possibility that VTT isn't set correctly. I know you have done this mod.

VTT follows the Vdimm on AOpen mobo......I've mod it so as to feed the Rams with more VTT that 1/2 of Vdimm, but it doesn't seems to help a lot.....maybe a little bit.....BUT it's not that easy to mod the VTT on AOpen.....It involves of a tracing cut near the ICL chip......

Can your Rams do @ 400MHz with 2.35Vdimm and 4-3-2-4.....?....If yes, thn they are OK.....Push them with more Vdimm....At 2.5Vdimm, mine do 398MHz with 3-2-2-1.....Test it...

[zbogorgon]

Can your Rams do @ 400MHz with 2.35Vdimm and 4-3-2-4.....?....If yes, thn they are OK.....Push them with more Vdimm....At 2.5Vdimm, mine do 398MHz with 3-2-2-1.....Test it...

that they can do, okey, thank you very much, i'll play with them a little more.


p.s. can you help me with another question in this thread

[ojdr2001]

Need some information please:

What max vdimm can I use with 2x1024 Patriot PDC22G6400LLK?
Which chips does this ram use?

Thax a lot

[SMa]

Need some information please:

What max vdimm can I use with 2x1024 Patriot PDC22G6400LLK?
Which chips does this ram use?

Thax a lot

I've got the same set. I can only give it 2.2v (Asus P5WD2 Premium without mod)
Can you post some results on 2.2v plz?

[Pt1t]

Is it good ddr2 to OC ?

D9DCN but ECC ddr2

finaly i tested it.
@2.1v

[nFo]

Has someone tryd this ram: G.Skill F2-8000PHU2-1GBHZ
Looks good or should I buy: Corsair 8500 ?

Update, Oops here:: http://www.xtremesystems.org/forums/...ad.php?t=98612
Search gives nothing

[tzitzos]

very nice thread

keep up the good work gorillakos

Ps:Na'sai kala file kai epsaxna ena tetoio thread me ddr2 kai infos

[albertwesker]

Centon Advanced PC6400 + PC 5400 --> D9 Fatbody/Micron BT-3 chips

[GoriLLakoS]

First post updated as i can...

Thanks Trident for the idea with the photos...

Correct me if i am somewhere wrong...centon will be added when i will get rest a little...