Chilly1 Continuation tread

[chilly1]

OK been sick again.. this time I went to the doctors as soon ais I got sick.. I feel better, the doctor hopefully will give me the all clear tomorrow.. I hope so....I got a few units that need to go out .. dame late on everyones and for this I am really sorry.. I promise to get them done.. I got Another helper so there will be three peeps here.. Including me... Fuggers brother is almost ready to go back to work.. SO yeah we are going to kick some A@@ at least that is the plan,, I got a vapo to SLI up first. This will ship on wed, with most of the parts orders. Again sorry for all the delays... THis SLI unit is really late and I Am certian it will be the best single compressor SLI mod I have ever done.. IT has one of the new condensers whose size dictated the fan be placed in front to clear the display. THe only thing holding me up is position of the head? the INterior evap needs to be in the proper position as there is only about 15 degree of rotation available in the hose, so I need to determins the position of the board in relation to how it will be used....

[njkid32]

It looks really nice Reggie I hope you start feeling better!!

[Alex08]

looks great. hope you feel better chilly1.

did that embraco compressor come with the vapo? or is the case the only thing that's making it a vapo unit still?

[chilly1]

looks great. hope you feel better chilly1.

did that embraco compressor come with the vapo? or is the case the only thing that's making it a vapo unit still?

Well when I am done the case will be the only thing left.. the controller might stay I am probably going to change that to a G froster unless I get the probes in by tuesday rfor teh vapo controller...

DOES anyone have a local source for the vapo controller??? and softeware for using more than oNE??/

[Trouffman]

Hope you feel better nearly
Do you know the ref. or s/n of this controller ?

[MaxxxRacer]

looks sweet.

to improve condensor performance, you can sandwich an old 25mm thick fan inbetween the fan and condensor. This will eliminate the dead spot of the current fan. Just make sure to rip out the guts of the fan.

BTW, that desuperheater looks pretty small. Admittedly I know jack about HVAC, i would think that such a small desuperheater wouldnt do much?

[jinu117]

Nah Maxxx, the condenser has enough capacity. Desuperheater is just to compensate for lack of capacity of condenser really. It is better if we don't have to use one for oil flow purposes.
Looking good reggie (In my case, I found it easier to just take out shroud and rivet it from the other side instead of trying to bend the pipe... not sure what you did on yours :P)
I hope you do get better soon. Lot of liquid and proper sleep man. That 3-4 hours gotta go.

[Gray Mole]

Yup, no question your work is the best Reg That coil looks more about vibration damping than much for desuperheating but will give a little extra, and not so much that anything wants to stick in there.

Just take care of yourself, cos from both a business and a personal level, we need you healthy but it's good to see that you're still able to handle the work too.

Nice looking SLI kit, and that compressor looks like it'll do the job nicely.

Far as 'twinning' up Vapo controllers I'd think you'll be in the same kind of position as with the frosters, if you want full safety on it you'll need custom programming and it's likely a better bet to go with the Froster X as you'll know that you can get the right setup with it

Gray

[fatty]

Very nice work Reg yeah and look after yerself mate where else am I going to get all my bits from

[chilly1]

Nah Maxxx, the condenser has enough capacity. Desuperheater is just to compensate for lack of capacity of condenser really. It is better if we don't have to use one for oil flow purposes.
Looking good reggie (In my case, I found it easier to just take out shroud and rivet it from the other side instead of trying to bend the pipe... not sure what you did on yours :P)
I hope you do get better soon. Lot of liquid and proper sleep man. That 3-4 hours gotta go.

Exactly swiching sides on teh schrod is easy with these.. Adn the coil is for dampening purposes so the coil does not get damaged in shipping.. (This was the issue on all of teh vapo's and Mach's that got damaged over teh last few years. THey had too short of a pipe from teh compressor to the condenser and this caused the movment of the compressor in shipping to fatiuge the condenser inlet at teh brazed junction of the pipe to the condenser... ) There were a few other weak points in bioth the vapo's and Mach's that caused shippng damage, but ultimately it was primarily due to rough handeling)

[Ssilencer]

I think that is more a vibration dumpener, not a dsh, that new condensors has enough capacity.
Take care of you Reggie, we dont want another young Dead legend "a la " James dean

[Master_G]

Sweet vapo mod chilly, please take your time and get better

G

[Entsafter]

Good to hear that you feel better! But take care and do what the doctor said

I like your new condensers! Should work very well.

[Philly_Boy]

Good to hear that you feel better! But take care and do what the doctor said

I am glad to hear you're feeling better. Do what the doctor says and take 'er easy til you're feeling back up to speed. Btw, nice pics of the modded Vapo unit!

[n00b 0f l337]

Ah great work like ever. I like those condensers!

[Weee]

happy to hear you went straight to the doctor this time! being sick = bad!

P.S.

Didn't you try and break off from the production line 2nd gen thread once already? http://www.xtremesystems.org/forums/...ad.php?t=84848

we'll see if this one manages to take over

[Carlz0r]

Looking great. Glad you're feeling better now. The last thing xs wants is a sick chilly1.

[eBoy0]

Looks amazing buddy, hope to see some pics of my unit, just a quick glimpse of its sheer magnitude!

[Vincentvega18]

Looking good, hope you feel better soon

[n00b 0f l337]

Hey reggie whats the model number on your embracos? And how quiet are they, I think i may have the same one sitting in my basement!

[chilly1]

FFGS7HA for the basic coolers...

[wkmgt]

Wow, Looks Amazing!!

[chilly1]

So far had a few issues on teh dual head 1 compressor. balance between is almost impossiable to get best o far is 15 degrees defferance -40 on head and -55 on the other at 5 inches avacume.. Flo test tells me both heads are identical.. SO>>>>> IT's on the fourth rip down and rebuild.. Hope it works this time.. This is the reason I no longer do these single compressor dual heads..... about 1 out of 3 ends up being a nightmare to tune.. I make every part identical soldered them all the same and still no balance... Been through 4 heads 3 lines and 4 captubes so.... I am going to try sometihing new to balance it and see what happens... bad thing is that aes a 90 degree and a straight head I had it working now as 2 90's it wont balance....

[wkmgt]

So far had a few issues on teh dual head 1 compressor. balance between is almost impossiable to get best o far is 15 degrees defferance -40 on head and -55 on the other at 5 inches avacume.. Flo test tells me both heads are identical.. SO>>>>> IT's on the fourth rip down and rebuild.. Hope it works this time.. This is the reason I no longer do these single compressor dual heads..... about 1 out of 3 ends up being a nightmare to tune.. I make every part identical soldered them all the same and still no balance... Been through 4 heads 3 lines and 4 captubes so.... I am going to try sometihing new to balance it and see what happens... bad thing is that aes a 90 degree and a straight head I had it working now as 2 90's it wont balance....

Why not keep it straight head and 90 and see what happens? I'm sure it could get worked out.....

[n00b 0f l337]

Are both heads at the same height? Do you use a T on suction?