New Memory Tweaker for Intel Chipsets

[FELIX]

It cannot use for P5B Deluxe.

It's still have some bugs, such as cpuz error.

...what bugs?
Is all combos indicates values?
Don't apply if a combo is empty

[DEVIL K-ce]

Hmmm not working with my MSI P965 Neo-F.

Timing's in bios : 4-4-4-12, change in tweaker too 4-3-3-8 and efect is 10-5-5-20

[FELIX]

...I send you a pm.

[DEVIL K-ce]

...I send you a pm.

I reply to You

Bug is only when i overclocking memory, in stoc clock's is ok.

[kenofstephen]

Great work Felix, thanks so much!!

[astaris]

Hi Felix..thanx for this nice prog...
Just one question: what the difference between "Write to Read Delay" and "Write-Read Turnaround clocks" settings?
I come from A64 where we have only Twtr and "Read-Write Turnaround clocks",
so i really don't understand this "Write-Read Turnaround clocks" setting.
Thank you.

[CyberDruid]

MemSet is a memory tweaker for Intel chipsets.
Chipsets supported: 845 855 865 875 915 925 945 955 & 975.



-Settings with an asterisk on 915<->975 chipsets are only referenced on 915pm/945pm (mobile) datasheets,
but I compared with differents registers dumps of 915<->975 chipsets,and settings are the same.
If you run on dual Channel,Be careful to always put the same value on Channel A and B.

-Settings with an asterisk on 865/875 chipsets gets from comparison with others softs.
-Others Settings on 865/875 chipsets come from Abit IC7-G bios.

Here is the 2.1 version:

MemSet.zip

Below a little soft for quickly testing your memory performance:
http://www.x86-secret.com/Download/mbench.zip
Simple,fast and accurate.

Tell me If You have a particular option in your bios,
and i try to add it in the tweaker if I can to do that.

If you find a bug,Reporte me please.
Screens are welcome.

Gonna put this to use right away! Thanks a bunch M8.

[BoLhCa]

Great program! I am now able to run PAT technology on my mobo ASUS P4C800 Deluxe with 4 moduls of ram and ofc my score in memory bandwidth increase over 6GB/s, before 5.8GB/s (sandra)!

THX

[Twisted-net]

The version 2.2 (beta) is an instant freeze of the system on my dell xps m1710 laptop.

(micron ddr2 667mhz 5-5-5-15, intel 945pm chipset)

If I change it to 4-4-4-12 its a freeze. (might be a to big change)
Whenever I change one value its a freeze.
Both channels get the same value.

Might be that the ram cant handle any changes but if it might be a user error plz tell me
Anyone else tryed this on his m1710

[FELIX]

...is the version 2.1 work fine on your laptop?
I send you a pm.

[bing]

Memset965C2.PNG

I have P5B Deluxe Wifi, just a quick question about the red circled box, is that a correct value ? Ask this because CPUZ is reporting Rev. C1.

Anyway, thank you very much for your effort developing this tool ! :thumbsup:

[tAmp0i]

Yes i am still having the same error. After exit and re-open, the values in the box gone.... CPU-Z bug

[FELIX]

->bing:I don't know if your stepping is C1 or C2,but I modified the reading,
try with this version:
MemSet22beta.zip

[Trellame]

Has anyone had any luck getting this to work with Windows x64?

[bing]

Hi Felix,

Thanks, its now showing C1.

Actually I was curious since P965 stepping C2 supposed to be release to manucfacturer by this Sept.

But it is clear now, and again just guessing that your update was referring to this page below right ?

Intel® 965 Express Chipset Family Specification Update
For the Intel® 82Q965, 82Q963, 82G965 Graphics and Memory Controller Hub (GMCH)and Intel® 82P965 Memory Controller Hub (MCH)

Again, thank you so much ! Great Work you've done there !

[FELIX]

...before the update I was referring to this datasheet too,
but I made the reading on bit[0] offset E4,whereas it's bit[3]

[@njo]

are you having problems with Gigabyte DS4?

[weonline]

Hi Felix,
My motherboard is 915G with ddr2 533 4-4-4-12, i can modify all main parameter except CL --- the most important parameter (now i working at 4-3-2-4), i have tried all version of memset but none of them can change CL. i'm very confident that my ddr2 can work at CL3, pls help me.

Tks & B.rgds

[therat]

Do these settings appear right for standard 5-5-5-15? The 42T for tRFC seems a big high or is that usual?

CAS# Latency (CL) - 5T
RAS# to CAS# (tRCD) - 5T
RAS# Precharge (tRP) - 5T
Cycle Time (tRAS) - 15T
Row Refresh Cycle Time (tRFC) -42T
RAS to RAS Delay (tRRD) - 3T
Read to Write Delay (tRTW) - 8T
Write to Read Delay (tWTR) - 5T

[FELIX]

Weonline-> it's seem that it's practically impossible to changing Cas# with DDR2,
and I don't know Why...

Therat-> 42T is a normal value for 5.5.5.15 timings.

[therat]

Therat-> 42T is a normal value for 5.5.5.15 timings.

great. thanks

[epox4life]

I have 2 sticks of kingston and 2 sticks of g.skill and this is the error I get when using all 4 sticks at once.

[BottomsUp]

I have 2 sticks of kingston and 2 sticks of g.skill and this is the error I get when using all 4 sticks at once.

I get this same exact error with my setup if i try to set timings tighter then 4449 on my 2x1GB G.skill HZ. My computer runs fine, but for some reason i can't get tighter then 4449

Setting tighter timings in bios still shows 4449 in memset and cpuz

[FELIX]

->epox4life,BottomUp:I send you a PM...

[IluvIntel]

Hi Felix, thank you for what seems an interesting program. However I went to install it, into its own directory and thus folder and I get this message saying
"The driver TVicport can not be found"
Others seem to be able to get it running, but I don't know what is up with this.
My motherboard is the one in my signature.