New Memory Tweaker for Intel Chipsets

[FELIX]

The last beta: cputweaker20b15

-Replace CoreVID by V-Core.
-Best XMP Profile is show now instead Jedec Profile in main window.
-Add V-RAM on some MBoards.

It seem that only ITE sensor can report V-RAM correctly.
If you are sure that V-RAM is correctly reported by another software like HWmonitor or AIDA64,
let me know and I'll try to add it.

[stasio]

Thanks Felix.

Vcore is OK.
Only Vdimm slightly offset.

Vdimm in BIOS 1.6400V
AIDA64....1.6440V
CPU-Tweaker....1.64V

Vdimm in BIOS 1.6450V
AIDA64....1.6440V
CPU-Tweaker....1.64V

Vdimm in BIOS 1.6500V
AIDA64....1.6560V
CPU-Tweaker....1.66V

Vdimm in BIOS 1.6600V
AIDA64....1.6680V
CPU-Tweaker....1.67V

Didn't reading Vdimm 1.65V in CPU-Tweaker.

[FELIX]

Thanks Fiery.

Fixed in this version: cputweaker20b15

You have really 2Gb of RAM in your system?

[stasio]

Thanks.
Previous pic 2x2GB.
Now is different 2x4GB RAM:



Edit:
sorry for name above.
(hard day)

[FELIX]

...Memory size fixed in this version.
Fixe also XMP profile report when you use the 4 Gb dimm.

[Movieman]

...Memory size fixed in this version.
Fixe also XMP profile report when you use the 4 Gb dimm.

sniffle-sniffle..Doesn't work on my dualie 2011..."Not for this system"....

[stasio]

Now read correct memory size.
- tRTP...missing
- PC3-14900,XMP RAM is 1866,so should be 933MHz (CPU-Z display XMP on many memory wrong).

[FELIX]

sniffle-sniffle..Doesn't work on my dualie 2011..."Not for this system"....

Support for LGA2011 CPUs is not planned for instand, maybe later if I find time to do it.

Now read correct memory size.
- tRTP...missing
- PC3-14900,XMP RAM is 1866,so should be 933MHz (CPU-Z display XMP on many memory wrong).

tRTP fixed in this version.
For XMP Profile, I can't do nothing: PC14200 is what is written in your best xmp profile.

[stasio]

Thanks Felix,tRTP fixed (missing memory size - 2x ).

AIDA64 and HWiNFO XMP (CPU-Z wrong):


Tomorrow I will have Team Xtreem 2600C10.

[FELIX]

XMP profile reading must be correct in this version: cputweaker20b16
Could you check also the spd table...

XMP specification was changed since revision 1.1 dating from October 2007 (yes I'm really late ) .
This is why the reading was wrong.

[stasio]

Thanks Felix,

XMP is OK now.SDP table....
Still missing memory size...(2x).....pic:

[FELIX]

Both should be fixed with this version. (Decidedly there is a lot of bugs )

[stasio]

Works,
thanks Felix.

[gonX]

maybe I'm missing something, but I can't click apply. I see it's enabled for some other people with Ivy. I'm still on Sandy.


I have one of the early revisions of the P8P67 Pro, so I can't update the BIOS.

[FELIX]

Could you send a cpuz register dump and a cputweaker reg.txt at memset@hotmail.fr

Also you can try this version: cputweaker20b20

[bbone]

Hi, FELIX! Nice job you have done there on the MemSet and other tools. However how about a support also i810E chipset? It is not very different from i815 and there are good documentation about it from Intel itself:
http://developer.intel.com/design/ch...hts/290676.htm
And some old machines like Dell OptiPlex are using this chipset AND they did not allow any settings in bios at all. Hence a tool like MemSet will be like a miracle gift for some oldtimers tweaking. And if that would not be very difficult, then it maybe deserve a little attention
Currently it, of course, just report that it is not for this system...
Thanks for consideration

[Alex-Ro]

Hey felix,nice tool.However i can't make it to apply any timing on my Biostar TP67XE with Intel P67.It reads everything ok but it won't apply the new values i set,they apper as applied in your program but cpu-z reports the same and the performance is the same as before.

[FELIX]

However how about a support also i810E chipset?

Ten years ago... an eternity in computer. You can try with this version.

I can't make it to apply any timing on my Biostar TP67XE with Intel P67.

...probably Memory Configuration registers are locked by the bios; I can't do nothing, sorry.

[FELIX]

The finale version: CPU-Tweaker 2.0

-Add support for Intel Sandy Bridge & Ivy Bridge CPUs.
-Add VCore and VDimm for all CPUs.
-Increase Reading XMP informations.

A special thank at Stasio, DarkeThe2nd and donmarkoni for help me to debug this software.

[stasio]

Hmm,seems Beta is better for me.
Mail send.

[gungstar]

vdimm reading wrong, set in bios 1,5v, same value measured by dmm
cputw.png

[stasio]

Redownload CPU-Tweaker 2.0,small update done (maybe not for your case).

[Assimilator1]

Re Memset 4.1, I can't change any of the timings, even the ones not greyed out (Btw I couldn't find a help file or site, hence I'm here ).
Only things I can click are 'exit' & 'about', can't untick 'auto' either, is this a mobo limitation or memset?

PC specs M/brd - Asus P5G41T-M LX (1101 Bios), 8GB Crucial DDR3 1333 RAM, Pentium E5200, Win 7 64bit.

TIA

[Assimilator1]

No one?

[NEOAethyr]

Supposedly this prog supports amd's correct?

This prog just inf loops on my system, I don't even know it's running unless I look at the taskmgr, where it tells me it's using 100% of one of my cores.
Is there any way of debugging this, to fix the prob?
I mean what am I supposed to report when the program doesn't work at all on my end... :\ ???