Looks great!!
Looks great!!
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Thanks.
Here is a screen of the new version:
CPU-Tweaker14b9
...probably spd speed info will change in the finale version; something like "PC3-10600 (666 mhz)@9-9-9-27-1N".
Last edited by FELIX; 02-13-2010 at 01:12 AM.
Hi Felix,
I just tried beta9 on the P55A-UD7 (win7 x86 and i5-660). It says "NOT FOR THIS SYSTEM". Beta6 does seem to work (apart from not reading the correct latency set, same with cpu-z) but gives some warning messages that doesn't go away even if you tick on the remember box.
Beta9 does work on my BloodRage (Vista x64 and i7-940)...
Cheers....
MaxXx
...could you try to re-download the version and tell me the result.
(link was changed a few hours after first update)
Otherwize, send a cpu-z registers dump at memset@hotmail.fr
Thank.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
Felix, thanks, the new link works, but it still detects the wrong CL as what is set the bios. I have set 7-8-7-20 in the BIOS. Seem to happen when I increase the base clock. On default bclock amd multiplier, it detects the memory timings properly. CPU-Z also behaves the same but its detection is way over. And the cores are missing. Let me know if you still need a CPU-Z dump. Please see below image. Apologies for all the trouble....could you try to re-download the version and tell me the result.
(link was changed a few hours after first update)
Otherwize, send a cpu-z registers dump at memset@hotmail.fr
Thank.
...yes you can send it (I'll try to see if I can fix Core and CL bug).
The best is to send a register dump at default bclock multiplier (when reading CL is OK),
and an other after increasing bclk (when CL is wrong).
Last edited by FELIX; 02-13-2010 at 04:19 AM.
Thanks Felix Sent you 2 files. CPU-Z ain't reading it properly even at stock bclock. Here's what it looks like at stock base clock....yes you can send it (I'll try to see if I can fix Core and CL bug).
The best is to send a register dump at default bclock multiplier (when reading CL is OK),
and an other after increasing bclk (when CL is wrong).
Hi Felix,
Can you please take a look at the screen capture in this post?
CPU-Z reports same memory clock as FSB, but MemTest readings vary from 200 to 448 according to the user.
=> maxxx: the core multi problem should be solved with this version: CPU-Tweaker 14b9
For CL, I just send you an email...
=>maxxx: I changed reading Cas# in this version: could you check it and tell me the result... thank.
Hi Felix,if possible to incorporate Vdimm in CPU-Tweaker?
This will be very significant information.
Thanks for capital letters.
Last edited by stasio; 02-16-2010 at 01:05 AM.
Need a Gigabyte latest BIOS?
Z370 AORUS Gaming 7,
GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
Evga GTS 450 SC, Gigabyte Superb 720W
XSPC RayStorm D5 EX240 (Liquid Ultra)
NZXT Phantom 630 Ultra Tower
Win 7 SP1 x64;Win 10 x64
=>maxxx: thank for your help.
=>Aurelien: comment vas?
Could you send me a cpuz registers dump of your system, I see that Refresh to Refresh delay is not reported correctly.
=>stasio: all is possible, but I don't know the process for report VDimm... perhaps in a next release.
Thanks to you we have a great utility!=>maxxx: thank for your help.
Last edited by maxxx; 02-16-2010 at 02:38 AM.
it seems that the last few versions are not on the server any more Felix?!?
...yes, new release: CPU-Tweaker14b10. Only some change in the interface.
I delete the old beta when I launch a new version.
Last edited by FELIX; 02-17-2010 at 02:56 AM.
Hi,
is there a way to control the settings via command line interface, like to set the multi, eist and turbo mode to use them in scripts?
Intel w3520(G0)@4.2Ghz@1.35V@eVGA X58 3x SLI classified, Swiftech Apogee XT ultra, 6 GB (3 x 2GB) Mushkin XP3-120800 1600MHz 6-7-6-24@1.65V, GeForce 7900GTX, 3x 74er Raptor WD740ADFD, 2x 250er WD2500YS RE, 1x 160er Samsung SV1604, Corsair HX Pro 750W, 2x HP LP2475w"
Hi Cumulonimbus,
what do you mean, the possibility to add a save function for multiplier, C1E, EIST and turbo?
=> Chike: it seem that it's possible, perhaps in a next version...
Bookmarks