New Memory Tweaker for Intel Chipsets

[FELIX]

a new build: CPU-Tweaker 1.2b4

-Enable change Core (FID) and UnCore Multipliers on AMD Phenom CPU.
-Improve Reading frequency.
-Some little change in the interface.

but I am not satisfied with this version, perhaps it's time to add a new window with advanced CPU settings.

[DarkCow]

Hey, I am trying to get Memset 4.0 to work on my Asus EeePC 1000he. It says the chipset is 945GME but I believe the chipset in the eee is i945GME

Regardless Memset isn't working correctly as every time I change a setting it causes a video crash. I was wondering if you knew if there was a work around.

Any help would be grateful

[FELIX]

could you make a registers dump (with cpuz->last table->registers.txt)
and send it at memset@hotmail.fr

[DarkCow]

I just sent you the Register Dump, thanks for the help!

[FELIX]

OK, could you try with this version: MemSet41b2.zip

[DarkCow]

Felix, I'm testing it right now. I am able to change just about every value except for CAS# Latency (tCL) which causes an immediate reboot of the system, but it is defiantly a step in the right direction. CPU-z reports tRCD, tRP, tRAS, tRC are all able to be configured by memset.

Thank you again for the help!

[Don_Dan]

tCL can't be changed in Windows, so it's working now as it should.

[DarkCow]

O... I see, well then it works perfectly! thanks Felix. Now it looks like I'll have to flash the spd to get cl5.

[RebelsHaven]

@Felix:

Add the Biostar T-Power X58 to the list of Motherboards that supports your CPU-Tweaker. Biostar has sent me a Beta BIOS after I asked them to unlock the TXT Registers, and it works fine. I will try to find how they did it.... Polygon

[FELIX]

...OK, will do, thank. I send you an email.

[FELIX]

FELIX: you shoul e-mail those mobo makers to add support

...if someone have a contact among Asus or MSI, let me know and I will send them an email.

[eva2000]

...if someone have a contact among Asus or MSI, let me know and I will send them an email.

I already passed your suggestions for unlocking their bios to DFI and Asus. DFI came through - now wait for Asus to do so

[FELIX]

...thank.

[Brama]

I already passed your suggestions for unlocking their bios to DFI and Asus. DFI came through - now wait for Asus to do so

On new Asus BIOS for R2E (1403 early beta) that unlocks Xeon cpus, CPU-Tweaker is still locked.

[Pt1t]

@Felix:

Add the Biostar T-Power X58 to the list of Motherboards that supports your CPU-Tweaker. Biostar has sent me a Beta BIOS after I asked them to unlock the TXT Registers, and it works fine. I will try to find how they did it.... Polygon

+1 , It works fine.

http://www.youtube.com/watch?v=uRmmi5bn0qs

[FELIX]

...very nice video, thank.

I wait for my new build, coming last week; I'll see if it's possible to add some settings like Core multi and others.

[ViRuS2k]

Hmmm weird,

Im useing a biostar Tpower x58 and i cant read the cpu speeds there all saying

0.0
0.0
0.0

lol

i have updated the bios aswell and cleared cmos ect ect still not working right.

help.

[zorz]

Could sombody help me!!!!

I have Intel DP45SG and when i start MemSet, i got a message MCHBAR Is Locked and no move. Is there any way to unlock my mobo MCHBAR???

What is the best tool to o/c wolfdale through windows???

I would regard Your answer .

Thx in forward...

[FELIX]

=> ViRuS2k: With wich cpu-tweaker version?

=> zorz: Sorry, no way; locked in the bios.

[FELIX]

A new beta version: CPU-Tweaker beta8

I added a new window wich allow to change multiplier on Core i7 CPU (this function is available
on all motherboard).
Also it's allow to change Turbo mode, EIST and C1E (not sure it's work for C1E).
First check that EIST is enabled before change multi.

On AMD K10 it's possible to change VID and uncore multi too.

[sofos1990]

Great news...Hope that it works well with REX2!
Congrats and thanks!!!

[eva2000]

nice but multi can't be applied only selected in drop down menu for me

[FELIX]

...have you tried with EIST enabled? also power option need to be "hight performance" for better result.
I have tried it with a i7 920 (setting are eist enabled, turbo enabled, C1E disabled, hight performance
in Power option) and it's work fine, can be change 12x to 21x .

[dpokrajac0]

for some reason it doesnt work for me.

[The-Fox]

Works fine for me on Foxconn Bloodrage GTI.
Intel core i7 920 D0, changed the multi from 21 to 18 and back to 21.
EIST Enabled, Turbo Enabled and C1E disabled.

Great features Felix, I really like it, makes CPU-Tweaker a neafty tool

BTW, how come some M/B for i7 allows to change the timings in windows ?
I remember you told me Intel locked it and you can only set it during Reset.