don't click on exit button but rather than X in top right corner
that should keep things correct
don't click on exit button but rather than X in top right corner
that should keep things correct
uncheck lock mchbar
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
Last edited by HamidFULL; 07-01-2007 at 02:39 AM.
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
Restart your system, run memset and unchek "lock mchbar"
www.HotOverclock.com Founder & Editor in Chief
---------------------
Upgrading to X58 ...
Q6600 G0 @ 3.8GHz FSB 423MHz w/Swiftech H2O 120 Compact Dual 120mm fan Last OC Details Here
abit IX38 QuadGT Rev1.0 (X38 Rev.01)
4x1GB Patriot +SL PC2-6400 Based on Aeneon AET760UD00-25D Chips! @ 1:1 1000MHz 5-4-4-8 2.0v
Sapphire Radeon HD 4850 A2 Normal Edition @ Core 820MHz Mem 2100MHz
Display 19" LG FLATRON L1960TR LCD Contrast 3000:1 Response Time 2ms Lightning Fast!! w/f-Engine Chip and DFC Technology
HDD 250GB Seagate Barracuda 7200.10 ST3250820AS
HDD 120GB Maxtor Max.10 6L120M0
PSU Zalman ZM1000-HP 1000 Watt Six 12v Rail and Dual Seperate Board
A4Tech X7 Gaming Mouse X-750BF Dual Laser Engin w/2500DPI
More about my Memory : it can do 950MHz 4-4-4-8 2.0v Stable and 1100MHz 5-7-7-12 2.2v Stable and 1200MHz 6-8-8-21 2.3v not Stable!
felix should we unchek "lock mchbar" for p35 chipset also?
nice job btw thank you again to you n stilt
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
...only if you have the same problem than HamidFULL (read post #575)
Last edited by FELIX; 07-02-2007 at 03:55 AM.
For the Write Recovery time and the write to Read delay, bios and memset are right; I explain:
Write Recovery time and Write to Read delay are internal dram timing.
There values are usually 3 to 8 for Write Recovery time and 2 to 6 for Write to Read delay.
But memset don't report these value, memset report Write to Precharge delay and Write to Read command delay.
Here is how these value are calculated by the chipsets:
Write to Precharge = Cas - 1 +BL/2 + tWR.
Write to read command = Cas - 1 +BL/2 + tWTR.
BL(Burst Lenght) practically always 8.
tWR(Write recovery time) is 3 for ddr or ddr2/400 and 4 for ddr2/533, 5 for ddr2/667-800.It's can vary.
For example, If your have ddr2/533 and your Cas latency is 4,Write Precharge = 4 - 1 + (8/4) + 4 = 11.
It's the reason that memset report higher values than the bios.
You can see here at page 114 for Intel explanations.
Asus P6T-DLX V2 1104 & i7 920 @ 4116 1.32v(Windows Reported) 1.3375v (BIOS Set) 196x20(1) HT OFF
6GB OCZ Platinum DDR3 1600 3x2GB@ 7-7-7-24, 1.66v, 1568Mhz
Sapphire 5870 @ 985/1245 1.2v
X-Fi "Fatal1ty" & Klipsch ProMedia Ultra 5.1 Speaks/Beyerdynamic DT-880 Pro (2005 Model) and a mini3 amp
WD 150GB Raptor (Games) & 2x WD 640GB (System)
PC Power & Cooling 750w
Homebrew watercooling on CPU and GPU
and the best monitor ever made + a Samsung 226CW + Dell P2210 for eyefinity
Windows 7 Utimate x64
anyone else notice how if you change the memory ratio from 4:5 to 5:6 the performance level changes from 7 to 10. Then if you change it from 5:6 to 1:1, the performance level jumps to 11. This was all @ 490MHz FSB on a P35-DQ6.
EDIT: On a hunch i did some more testing.
I booted to 400MHz FSB with memory @ 1:1, Performance Level was 11. Booted to 515MHz with memory @ 1:1, Performance Level was still 11. Booted to 515MHz FSB with memory @ 5:6, Performance Level dropped to 10. Booted to 400MHz FSB 5:6, Performance Level was also 10.
So I do not believe the FSB has anything to do with the strap change on the P35-DQ6, just the memory ratio. Kind of odd through that 1:1 would be a higher Performance level over 4:5 though.
Last edited by lowfat; 07-11-2007 at 01:09 PM.
1:1 and 5:6 are part of 333strap. 4:5 is part of 266strap.
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
Don't know if it is a memset bug or gigabyte bug but on p35 DS3r it shows weird 'Write to precharge' and 'write to read delay' timings, completely different from those set in bios.
When set to Auto, they seem fine
If I remember right the same thing happened to old DS3 965
...
kiwi=> read post #583, make the calculation, and tell us the result.
Felix Memset wont repor DDR3 MHz on Gigabyte P35T DQ6, how can i help you to fix this?
Report nothing, or wrong value?
I send you a PM.
It's the bios. The bios engineers screwed up pretty badly and they still haven't figured it out. They didn't change the calculations in the bios from the way they have the stupid (+.1V +.2V +.3V) things. When you set one of those values in the bios, it ADDS whatever you set it to to the default value.
For example, write to precharge is default at 5 in bios. If you select 11 for the value, memset will tell you that it's really 16, because it is.
Felix, have you fixed the 1:1 cas 5 on p965 boards? The PL worked on my board, just not with 1:1 cas 5.
E6400 L624A768 @ 3600mhz 1.48V
Biostar TP35D2-A7
2x1GB Micron D9JKH, 2x1GB OCZ Gold DDR2-1100
1x250GB WD SATAII 2x120GB Maxtor IDE 1x200GB
EVGA 8800GTS 512MB stock 799/1998/2075
MCW350, Apogee, 120.1 Swiftech Rad
Antec Smartpower 500W
BenQ DVDrw
Logitech z-5300e
you move from andover??
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
Program doesn't detect my IP35 chip (Abit IP35-E). Anyone with a fix or link to a good download?
TIA,
F
=>Hutch:I add some values in PL on this version, not sure that it's enought.
=>furbally: save a register dump (with cpu-z->last table->register.txt) and send it at: memset@hotmail.fr
Running now after downloading the latest version. Is there an instruction manual?
TIA,
F
=metro.cl, hutch: use this version: MemSet33
Bookmarks