New Memory Tweaker for Intel Chipsets

[BottomsUp]

FELIX you have a PM. That version fixed my bug.

Wierd thing is if i set 4444 via bios CPUZ still reads 4449. Any idea what is causing that? Is my RAM really running 4444 or is the DS3 somehow not applying these changes correctly?

[wwwww]

Hi Felix, thank you for what seems an interesting program. However I went to install it, into its own directory and thus folder and I get this message saying
"The driver TVicport can not be found"
Others seem to be able to get it running, but I don't know what is up with this.
My motherboard is the one in my signature.

Run the install inf file.

----

On another note, is there a 64bit version?

[rorojiao]

Hello FELIX:
Thank you for create this tool It's So useful tool.
But, It can't work in my ASUS A3 notebook PC 915GM board.
When I change the CAS, the windows crash.
I try to change the value of CAS up or down, the windows always crash.

So the result is the value marked by red can not be changed.(Cause windows crash)

The other values can be changed.(work normally).
I have attached the picture below:
I have tested it in another notbook PC of ASUS A6, the case is same

Could have a look with it, Thanks a lot!

[rorojiao]

FELIX
I don't know is memset support 915PM/GM or not?
Could you add it or fixed it ?

[rorojiao]

BTW
I found the datasheet of the Mobile 915PM/GM/GMS here.

http://developer.intel.ru/download/d...s/30526401.pdf

May be it can help you a bit.

[chrisf6969]

Hi Felix, thank you for what seems an interesting program. However I went to install it, into its own directory and thus folder and I get this message saying
"The driver TVicport can not be found"
Others seem to be able to get it running, but I don't know what is up with this.
My motherboard is the one in my signature.

READ the ReadMe file.

You need to right click & install the install.inf file

I'm getting that same weird reading error on my DS3. I happens randomly (not all the time) I have memory set to 5-5-5-15 in BIOS, everything else on Auto at 300FSB 1:1 ratio (ie: only DDR2 600 for my DDR2 667 ram)



Any IDEAS? Is this a stability related problem? Or just a reading error?

[RatusNatus]

I dont have any problem with this app on my MSI 915G combo.

Also no problem with CPU-z used with the very same time.
CPU-Z update his repport 1 second after the change.

Runs like a charm, thanks.

[RatusNatus]

Hello FELIX:
Thank you for create this tool It's So useful tool.
But, It can't work in my ASUS A3 notebook PC 915GM board.
When I change the CAS, the windows crash.
I try to change the value of CAS up or down, the windows always crash.

So the result is the value marked by red can not be changed.(Cause windows crash)

The other values can be changed.(work normally).
I have attached the picture below:
I have tested it in another notbook PC of ASUS A6, the case is same

Could have a look with it, Thanks a lot!

Man if you are trying to put "3" over there, the Windows crash simply cuz your memo dont support this timing. Try to set it to 5.

[FELIX]

Here is a new beta version:

MemSet22beta2

-Add support for A64(ddr&ddr2)

-Add some highers value in each combos on 965 chipsets.
-add a box "Lock mchbar when close" on 965 chipsets.

Normal operation is:Unlock mchbar(where are timings registers)->
Read,and eventualy write values->Lock mchbar when close the application;
but some 965 motherboards don't accept a second accesin mchbar,
it's why memset read [-7.7.7.-.-.63.-.-.-...] and cpu-z 10.15.15.31.
Then i add a box "Lock mchbar when close" on 965 chipsets.
This box is checked by defaut,uncheck it if you have this problem.
If you are sure you finished to use memset and cpu-z,
advise to check again for Lock mchbar.

[rorojiao]

Man if you are trying to put "3" over there, the Windows crash simply cuz your memo dont support this timing. Try to set it to 5.

Yes, I have tried to set it to 5.....Crash still occur I don't know why...
I asked FELIX for that. He told me the CAS of DDR2 can't be changed

[FELIX]

...on some motherboards,not all.

[FELIX]

Not necessary to install/uninstall driver with this version:

MemSet.zip

[Harshal]

Gonna give it a try on P5B-Dlx...
Thanks, Felix.

[Lestat]

guys if you had read the thread instead of going right to the last page you would have seen Felix said exactly why it gives the wierd readings and how NOT to let it do that.

[P@pi]

Thx FELIX for solving my issue , new beta release works fine with my M6VA laptop, thx a lot

[bl1zZ]

Hi Felix, Memset doesnt work for me on x64.
Could you fix it?

Regards

[smart1]

Felix thanks for a great piece of software, can you please advice the tightest timings or at least the place where I can learn in for my 2x 1024MB Corsair Twin2X2048-6400. Currently running with my 805D (200x20) 800Mhz 4-4-4-12 2.1V on Asus P5B mobo. cheers. Zhenya

[Shpoon]

Can someone explain to someone retarded like me how to set these timings? I do it, and no matter what, I can't get tehm to stick after startup...

[rorojiao]

New version still crash the system on my ASUS A3(915PM)

[bachus_anonym]

@ FELIX,

Hi! I would like to report couple bugs I found, while playing around with on ASUS P5B Deluxe (Intel 965P) and your latest beta Memset:

- amount of memory incorrectly reported as 2048MB instead of 4096MB --> screenshot,

- memory ratio incorrectly reported as DDR2-666 (4:5) instead of DDR2-889 (3:5) --> screenshot,
Thanks

[ben ifin]

Hi Felix

I have a P5B Dlx and d/l the latest Memset Beta 2.2

My problem ?

The Memset window/program does not fully display - I try to re-size it so that I can see all the settings, but no go.

I have a *lot* of my XP Services DISABLED to maximize machine efficency.

I'm wonderingthen does Memset require certain XP SERVICES to be running in order to properly display ?

I am running XP SP2.

Thx,
Ben

[FELIX]

...have you tried with all service enabled?
I never had this problem until now...

[ben ifin]

Hi Felix

Any particular or key Services you would suugest ? SO I dont have to re-enable all of them to find just one [ if that is the problem ? ]

Many thx,
Ben

[FELIX]

What is your screen resolution?

[ben ifin]

1600 x 1200 - tried 1280 x 1024 and still no go

Ben