Frozen SS

[kayl]

Slowly been working on some new, longer and skinner cases that take the mach2 controller
Picked them up today, dropping them off tomorrow at the power coater cant wait
By far my best cases yet.

[tiborrr]

That's a lovely case there, Kayl, although the fan cut-out isn't the prettiest. Ton of space, hooah!

[kayl]

That's a lovely case there, Kayl, although the fan cut-out isn't the prettiest. Ton of space, hooah!

thanxs mate, once powercoater they will look the bomb
Should be ready by friday

[kayl]

Unit all together and running. Flashed to the latest mach2 bios and unit is running, time to start tuning

[teyber]

damn great paint!

[tiborrr]

Really, that's a great paint job. Mouse gray

[gosmeyer]

Kayl,
Nice to have seen you progress over the the last few years
I agree with you, Best by far

Eric,

[kayl]

damn great paint!

thanxs teyber

Really, that's a great paint job. Mouse gray

thanxs tiborrr, Its actually black with silver specs going through it.
Flash of the camera makes it look different

Kayl,
Nice to have seen you progress over the the last few years
I agree with you, Best by far

Eric,

thanxs Eric, that is a old case deisgn, newer cases are alot easier to work with when tunning and making changes.
since then i have learnt to use autocad, before i use to get my friend to do the drawings. now i can do my own and no need to wait for him to do the drawing in his spare time

[ultralo1]

Very professional looking system.

[kayl]

Very professional looking system.

thanxs mate
some results on the SS what a nice cpu

[thebanik]

simply awesome work from a SS....

[kayl]

simply awesome work from a SS....

thanxs mate, not bad for a SS, cant wait for ln2

http://valid.canardpc.com/show_oc.php?id=687531

[kayl]

[gosmeyer]

Very nice-

[Alexxx650]

http://img200.imageshack.us/img200/598/89672656.jpg
kayl How many there is this card and the display to it?
There is a desire to buy.

[kayl]

Very nice-

thanxs mate

and some more on the mach2 unit all finished

http://img200.imageshack.us/img200/598/89672656.jpg
kayl How many there is this card and the display to it?
There is a desire to buy.

these controllers are the mach2 controllers, the company went out of business. I managed to get 5.
I think you can still get the gfrosters though here

http://www.xtremesystems.org/forums/...ad.php?t=96464

[Unseen]

Kayl i think you know how much i admire your work, but let me tell you my opinion in sth.

I saw all these years the progress you made from getto master to one of the best builders in phase change, but dont you think you ended up
with a ss that looks like Vapochill? Yes i know it is the internal that counts but i believe you can design a better case than this!
You have to make sth innovative and different. Not only for the customers but for our viewing pleasure too

Keep going!

[kayl]

Kayl i think you know how much i admire your work, but let me tell you my opinion in sth.

I saw all these years the progress you made from getto master to one of the best builders in phase change, but dont you think you ended up
with a ss that looks like Vapochill? Yes i know it is the internal that counts but i believe you can design a better case than this!
You have to make sth innovative and different. Not only for the customers but for our viewing pleasure too

Keep going!

thanxs mate, i wanted to make a case that went together easy but at the same time was a case that had good access to tune units. It does look a little similar to the Vapochill because of the side panels, but the idea behind those holes lets the case vent. The SS was added to make it unique
I have some other bench cases drawn for 2hp compressors. Just need the cash to get them made now
These will be nothing special on the sides so I can line the inside of the cases with sound dampening material to reduce noise. Also the perfect case airbrush.

[teyber]

I think its great, its hard to have so many different products that really have to be the same...

[kayl]

2hp dual head unit, this time with the bigger gpu head

[kayl]

Finally got around to making some new inserts that go in the top of my mounting system
They are hard plastic that doesnt compress or transfer cold
same stuff as used with ln2 mount plates. Installed one into my cascade tonight and having a little play on my new golftown cpu :nod:

[Gray Mole]

Wow Kayl, good to see you around

Love that unit of yours, the custom graphics are hot.

I still have a couple of your head here, I should use one soon. Performance was always great with them.

Never liked the old mount though, if it's compatible with the old heads, might just see if I can get a kit for them, looks a little easier to work with.

Take it easy

Gray

[kayl]

Wow Kayl, good to see you around

Love that unit of yours, the custom graphics are hot.

I still have a couple of your head here, I should use one soon. Performance was always great with them.

Never liked the old mount though, if it's compatible with the old heads, might just see if I can get a kit for them, looks a little easier to work with.

Take it easy

Gray

like wise gray, you have been off scene for a while
Ill have a look i have some old heads, there a little shorter.
you might need to skim an enclosure down a little that or stick foam tape inside the enclosure to make the head stick out.