New OFFICIAL bios for thew 8RDA+ and 8RDA
Available at AOA.... here:
http://www.aoaforums.com/forum/showt...threadid=14097
Have fun
New OFFICIAL bios for thew 8RDA+ and 8RDA
Available at AOA.... here:
http://www.aoaforums.com/forum/showt...threadid=14097
Have fun
Zen2 Has brought AMD back!
Yeah I saw that..... maybe they'll fix the " I killed a bios bug in the next one........."
Zen2 Has brought AMD back!
Anyone try this yet?
Zen2 Has brought AMD back!
It didn't do shyt on my board...U were expectin Nirvana perhapsOriginally posted by muzz
Anyone try this yet?
~~Stepper~~
A Man of Wealth & Taste
Outta my mind...back in 5 min
www.spotajavacoffee.com
X_Peed2400
Epox-8r_Da
Anorexic_TruePowDer 550waste of ca$h
M_ax C_ooling X_pence462+/Semi_Smart Fan II
2*512Mb Cors_hair X_tra M_oney S_pent PC3200c_a$200.00
ATI Radiation8500
Sin2k/MaXtor'd60giggleATA133
Memor_XXX 4.8x2.4x4.8
Every one of these parts has blown uP and been replaced!
U really r a funny MoFo step.............
Zen2 Has brought AMD back!
does it still have the magic helth at boot up? I like that
xp2100+@2550mhz 2.03v 210fsb
Abit nf7-s v1.2
ATI R9700
2x512mb Cprsair pc3500 c2
Dual Channel!!!!!WOOT
SATA raid on 80gig maxtors
highest 3dmark 19300
3dmark2k1
It should do. I don't see a reason why they would take that feature out.
The new BIOS works great here, fixed the "remove power and have to reset cmos problem", I can also now make all the settings I want first time through after a cleared cmos, before I would have to do it in steps in oder to get to the mem timmings I use. Yes the health on boot is still there also.
The new BIOS works great here, fixed the "remove power and have to reset cmos problem", I can also now make all the settings I want first time through after a cleared cmos, before I would have to do it in steps in oder to get to the mem timmings I use. Yes the health on boot is still there also.
Just flashed and got more stability then ever at 215mhz but still no full 3dmark.
xp2100+@2550mhz 2.03v 210fsb
Abit nf7-s v1.2
ATI R9700
2x512mb Cprsair pc3500 c2
Dual Channel!!!!!WOOT
SATA raid on 80gig maxtors
highest 3dmark 19300
3dmark2k1
Looks like it introduced a double posting problem, thoughOriginally posted by Adam217
The new BIOS works great here, fixed the "remove power and have to reset cmos problem", I can also now make all the settings I want first time through after a cleared cmos, before I would have to do it in steps in oder to get to the mem timmings I use. Yes the health on boot is still there also.
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
How can you tell that you have more stablity than ever? Did it just get you further through 3dMark than ever before?Originally posted by PimpJack
Just flashed and got more stability then ever at 215mhz but still no full 3dmark.
Epox 8RDA v1.1 | Athlon XP 2100+ AIUHB 0301 @ 2205 mhz (200x11) @ 1.8v | Radeon 9800 NP @ 378/324 | 2x256 MB of Corsair XMS PC3200 CAS2 | Maxtor 80gig 5400 HD | Linksys LNE100TX | SLK-800 w/42.5 cfm Sunon 80mm fan | Antec SX830 w/Antec SL400 PSU
I'll have to try it, if I can ever get past C1 at boot up
OPP
Hey I'd take c1...... better than my first board that went titz up...........Originally posted by OPPAINTER
I'll have to try it, if I can ever get past C1 at boot up
OPP
Zen2 Has brought AMD back!
Heh I had that same problem last night....Was at 12.5x198. Cleared CMOS. No post: C1. Hold insert -> post. Then I had to back down to 190. Boot into BIOS, set to 194, reboot then work my way up to 198 again (then to 200 max for 3Dmark).Originally posted by Jeff
If you try clearing the BIOS and it still gives you a 'C1' error, try taking out 1 stick of RAM. It's worked for me 3 or 4 times now.
Damn these 8RDA/+ boards are odd... but odd in a good way.
F@H boxen 39,869 MHz - Standford stats - EOC stats - Folding 4000 Club
Dugu 9 Tweaks: 3DMark 2001 guides || RAM timings || Recommended RAM settings for P4 DC DDR system || How-to: Overclocking Athlon64
My PC: A64 3200+ :: Shuttle AN50R :: 2x256MB XMSX3500 @ 270Mhz 2.5-2-2-6 3.4V& 512MB XMS3200LL @ 245MHz 2-2-2-6 3.1V :: Excalibur HIS 9800Pro 128MB :: CMV CT-722D 17inLCD :: 3DMark 2001: 24515 || Watercooling coming "real soon now"...
Better than 3117 by a mile, but still not on pace with 2C31. Faster in games tho, or it might be the new drivers.
Proud Founder of Redline 3D
Whats up here???
I have flashed to ever bios that I have seen and this is the only one that has given me problems....
I tried flashing with the bootdisk method man its starts to flash and the a prompt will popup in the blackground and it will say waiting for ever, so I just rebooted.
I then tried doing the alt+F2 method and it says these bios are currupted or something and I should try redownloading them...well I tried redownloading them and I get the same thing.
I also tested to see if the bios chip got messed from flashing so many times or something and it flashed just fine to one of the older bios I had and back to 3117:smileysex
oh well I guess this is one bios I won't be able to test out
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
This new BIOS fixes my problem !Originally posted by Niko
Heh I had that same problem last night....Was at 12.5x198. Cleared CMOS. No post: C1. Hold insert -> post. Then I had to back down to 190. Boot into BIOS, set to 194, reboot then work my way up to 198 again (then to 200 max for 3Dmark).
YAY !
F@H boxen 39,869 MHz - Standford stats - EOC stats - Folding 4000 Club
Dugu 9 Tweaks: 3DMark 2001 guides || RAM timings || Recommended RAM settings for P4 DC DDR system || How-to: Overclocking Athlon64
My PC: A64 3200+ :: Shuttle AN50R :: 2x256MB XMSX3500 @ 270Mhz 2.5-2-2-6 3.4V& 512MB XMS3200LL @ 245MHz 2-2-2-6 3.1V :: Excalibur HIS 9800Pro 128MB :: CMV CT-722D 17inLCD :: 3DMark 2001: 24515 || Watercooling coming "real soon now"...
I got it to work
I had to go get the file from epoxes FTP and put UPDATE.BAT and RESTORE.BAT on the disk too and it all worked fine
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
Hmm.....I don't think this temp reading is right.
I admit it is warmer in my room then it was last night but it is no 87F
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
This is what I was getting last night......
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
I wish you could attach more than 1 pic per a post....oh well this is what it looks like with the new bios
Cheers
Abit IC7 @300FSB Bios 28
P4 2.4C@3.6Ghz
ATI 9700 Pro @ 445/710 Vgpu modded
Corsair XMS PC 3500 256mb x2
Liteon 52x24x52 CDRW
WD 40GB 7200RPM x2
Enermax EG465P-VE(FCA)
Chevy Chevette Heater Core
MCW50-T
Eheim 1048
Prometeia Mach I
Lian Li PC65B
Bookmarks