a was bord so a got some old hardware end playt with it for a wile
whis is my old 1000mhz 100mhz fsb athlon
and this is a sepron 2200+ thats standers 1500mhz @ 166mhz fsb
a was bord so a got some old hardware end playt with it for a wile
whis is my old 1000mhz 100mhz fsb athlon
and this is a sepron 2200+ thats standers 1500mhz @ 166mhz fsb
Rig 1
CPU: I5 750
Mobo:Asus p7p55d
Ram:1x buffalo 2gb 1800mhz cas 7
VGA:9800gx2
PSU:Coolermaster 550w
HDD: 1x 250gb and 1x320GB Sata
Cooling: coolermater tx3
Rig2
CPU: celeron d 340 @ 3,5 ghz
Mobo:intel 865
Ram: 2gb a-data
VGA:GF 7600gs
on the sempron the bord can not go + 250 so i have to go onlock it
Rig 1
CPU: I5 750
Mobo:Asus p7p55d
Ram:1x buffalo 2gb 1800mhz cas 7
VGA:9800gx2
PSU:Coolermaster 550w
HDD: 1x 250gb and 1x320GB Sata
Cooling: coolermater tx3
Rig2
CPU: celeron d 340 @ 3,5 ghz
Mobo:intel 865
Ram: 2gb a-data
VGA:GF 7600gs
Got bored of reaching the edge??......
On which mobo are you running those old CPU's...??
Vcore is awesome.....Now there is a domain where computers have achieved improvements.....
I got the same SuperPi with a P4 B running on laptop mobo....
about 1 min 20 SuperPi.....2.4 Ghz.......stock (No ClockGen
On the other hand, i got a Celeron D on socket 478 that did 3.500 Ghz and a nice round 46 sec. SuperPi...
Not so bad with 256 Ko L2 cache....only...
I have a Sempron 2200+ (Socket A) running @ 166 FSB....i think...
Here is the stepping :
BCXJB 0449EPBW
Is the Pencil mod available for these..??
P.S. : Your temps are so low.....What cooling are you using??
Have souvenirs of running an Athlon XP 2000+ on an ideq 200N.....almost 65-70°C load with a good heatspreader.....damned those are hot...
Last edited by Newbie_User; 01-30-2006 at 05:37 AM.
Man is a wolf to Man. Then i wanna be the Tex Avery wolf......at least to enjoy the kiss of a woman.....
i juist a asus kt 400 motherbord for couling i juist a standert aluminium coulermaster blok for 80 mm fan en i put a 92mm on it en for memory i juist standers kingston tccc 256 ddr 3200 and no case everyting was just on the table i stil have 1 1400mhz 133fsb with a tunberburd core but i do not have the kt 400 bord anny more btw the sempron is not onlockeble with pensel en that sucks
Rig 1
CPU: I5 750
Mobo:Asus p7p55d
Ram:1x buffalo 2gb 1800mhz cas 7
VGA:9800gx2
PSU:Coolermaster 550w
HDD: 1x 250gb and 1x320GB Sata
Cooling: coolermater tx3
Rig2
CPU: celeron d 340 @ 3,5 ghz
Mobo:intel 865
Ram: 2gb a-data
VGA:GF 7600gs
I may try to overclock this baby..as soon as i get a Socket A mobo...
Hopefully....it's an Asus..M-ATX ...with Integrated graphic...
I'll try...
Is there any known way to push those CPU to the edge.....mods!!!!!
Such as :
Activate 512 Ko L2 cache....
Man is a wolf to Man. Then i wanna be the Tex Avery wolf......at least to enjoy the kiss of a woman.....
i dont now noting about mod's sorry
Rig 1
CPU: I5 750
Mobo:Asus p7p55d
Ram:1x buffalo 2gb 1800mhz cas 7
VGA:9800gx2
PSU:Coolermaster 550w
HDD: 1x 250gb and 1x320GB Sata
Cooling: coolermater tx3
Rig2
CPU: celeron d 340 @ 3,5 ghz
Mobo:intel 865
Ram: 2gb a-data
VGA:GF 7600gs
Bookmarks