X1900XT/XTX on Air

[Elfear]

Awesome scores guys. Would you guys mind posting what voltages you used with your X1900's? Even listing what the default voltage is would be beneficial since I can't seem to find it anywhere.

[chew*]

Xt flashed to XTX.....No OC other than bios flash........Stock cooler...the slower score is my max clocked x1800xt 06 record

[LenniZ]

My CPU is such a bottleneck, with 2.8ghz and 680/1600 my score was lower than 2.9 ghz and 670/1600 :| and with several hundred points!

[FlyBoyGeo]

What are the best tools used for voltages/clocks and the X1900???

Core/Mem speeds = ATI Tray Tool?
Core/Mem Voltages = ATI Tool 12 Beta?

[PcCI2iminal]

690/800mhz













im rebuilding the OS for benching

[FlyBoyGeo]

3DMark06 5471


3DMark05 12431


3DMark01 37953


All at stock voltages. 708 Core & 810 Memory

[Gorod]

Just a small update , been trying to clock the card higher by upping volts with no positive results at all In fact any volts higher then stock just made the things worst And ya , i tried to actually lower volts - it didn't help too ... Benches done with open window , ambient temp outside right now here in Atlanta is 53° F , probably around only 65° F in my room

FX57 @ 3157MHz , 1.50V , 263x12.0 , HTT x4
Cooler Master Hyper 6
DFI LP UT nF4 SLI-DR , 623-3
2x512Mb , 263MHz @ 2.0-2-2-5-1T , 3.4V
Saphire X1900XTX , 735/900 (stock cooler , Def. Voltage )
OCZ Power Stream 600W , OCZ-600ADJ SLI
Win XP Pro SP2 (for now) , Drivers that came on CD from Sapphire (modified 6.1 ? )

3DMark01 : 40010
3DMark03 : 21784
3DMark05 : 13088
3DMark06 : Failed After 45min i gave up , it wouldn't pass Forest or Proxycon tests with 735MHz on GPU ...

Aquamark3 : 109.154

[Gorod]

Very nice 05 and 06 scores Gorod!

Can't wait to see what you can do with 01, 03, and AM3 when you get all the kinks out.

I need to get a second hard drive to install Win2K for 2001 first (don't wanna mess my 24/7 win install i have right now cause i need it to play Battlefield2 lol ) - should help a lot hopefully may be 41.0-41.5K with same settings right ?

Keep us up to date on your progress, if you don't mind.

I don't mind at all m8 - but it looks like i found cards limit for stock cooling , it's time to move on for water cooling and after that for some DI Just waiting for ORB to add X1900 official support first

Congrats Gorod on nice scores !

Gorod what PSU are you using for that setup ?

It's an OCZ Power Stream 600W (SLI Ready model)

Gorod, can you tell me what your score is w/everything default. 3DMark 05
CPU @ 2.8 and XTX out of box..

Hey, how much are u getting default?

FX57 2800MHz
200MHz FSB 2,5-3-3-5 or smth
X1900XTX default

Let me see , give me a sec. plz

[Kesnel]

Here are my results.

System:
Opteron 146 @ 3.4Ghz - Mach II GT
1GB Mushkin Redlines @ 243mhz 2-2-2-5
ATI Sapphire X1900XT-X @ 729/891 - Stock cooler
DFI Ultra-D
OCZ Powerstream 600w

3dmark01: 38,834


3dmark03: 21,387


3dmark05: 13,017


3dmark06: 5,674


I couldn't get the card to clock any further either, it topped out at the exact same speed as Gorod's.

[Dumo]

So far can't use ATI Tool... 689/799 on ATI OD..

[Viss]

Here are my results.

System:
Opteron 146 @ 3.4Ghz - Mach II GT
1GB Mushkin Redlines @ 243mhz 2-2-2-5
ATI Sapphire X1900XT-X @ 729/891 - Stock cooler
DFI Ultra-D
OCZ Powerstream 600w

3dmark01: 38,834

I think your 3D01 should be higher at those clocks. Did a quick run with stock X1800XT and NO lod. Maybe its a CCC setting.

[Kesnel]

I think your 3D01 should be higher at those clocks. Did a quick run with stock X1800XT and NO lod. Maybe its a CCC setting.

<IMG>

I was also thinking that. Would you be able to post your CCC settings up please? If you could that would be great.

[FlyBoyGeo]

I was also thinking that. Would you be able to post your CCC settings up please? If you could that would be great.

Was just going to post the same question. What are the best CCC settings? Thanks

[Gorod]

Gorod, can you tell me what your score is w/everything default. 3DMark 05
CPU @ 2.8 and XTX out of box..

Hey, how much are u getting default?

FX57 2800MHz
200MHz FSB 2,5-3-3-5 or smth
X1900XTX default

Everything Default :

FX57 @ 2813MHz , 1.36V , 201x14.0 , HTT x5
Cooler Master Hyper 6
DFI LP UT nF4 SLI-DR , 623-3
2x512Mb , 201MHz @ 2.0-2-2-5-1T , 3.2V
Saphire X1900XTX , 648/774
OCZ Power Stream 600W , OCZ-600ADJ SLI
Win XP Pro SP2 (for now) , Drivers that came on CD from Sapphire (modified 6.1 ? ) , Def. CCC settings (Balanced)

3DMark01 : 32679
3DMark03 : 18711
3DMark05 : 11289
3DMark06 : 4929
Aquamark3 : 94.727





A64Tweaker & CCC Settings:

[SIOUX]

Everything Default :

FX57 @ 2813MHz , 1.36V , 201x14.0 , HTT x5
Cooler Master Hyper 6
DFI LP UT nF4 SLI-DR , 623-3
2x512Mb , 201MHz @ 2.0-2-2-5-1T , 3.2V
Saphire X1900XTX , 648/774
OCZ Power Stream 600W , OCZ-600ADJ SLI
Win XP Pro SP2 (for now) , Drivers that came on CD from Sapphire (modified 6.1 ? ) , Def. CCC settings (Balanced)

3DMark01 : 32679
3DMark03 : 18711
3DMark05 : 11289
3DMark06 : 4929
Aquamark3 : 94.727





A64Tweaker & CCC Settings:

You have to set the AI to Advanced and not standard in CCC, and also mipmap to performance thats were you loose your points

[Gorod]

You have to set the AI to Advanced and not standard in CCC, and also mipmap to performance thats were you loose your points

Ya i did that already (few posts above - post#32 ) , guys asked me to run with Everything Default - (i believe it means CCC settings set to Default too ? - may be i am wrong )

[gjwild]

That's exactly what I aked for Gorod.
Thanks, just wanted to see where you were at w/defaults..

[Viss]

I was also thinking that. Would you be able to post your CCC settings up please? If you could that would be great.

Mine:

[Kesnel]

Thanks for the help.

I'll check my settings and do another set of runs when I'm back home with my rig.

[teko]

Going to post mine ASAP, just hopes that the Club3D will rock as much as the rest :/

[Dynasty]

howcome you guys are using ATI OD and not overclocker tool for clks.

[overcast]

howcome you guys are using ATI OD and not overclocker tool for clks.

Overclocker relaxes timings on the ram significantly to acheive high frequencies. ATI Tool does not and acheives it's true overclocking potential.

[LenniZ]

Improved my score a little bit, but take a look:



Now at 2.9 Ghz:



This is sick, singlecores really suck, give me an X2

[Dynasty]

Overclocker relaxes timings on the ram significantly to acheive high frequencies. ATI Tool does not and acheives it's true overclocking potential.

With overclock tool you can clk core alot higher then OD lets you.
Relaxed timings you can just clk mem. higher thats all.

I use overclock tool for clks and ati tool for voltage,
been doing this with both X1800/X1900 cards and works like a charm.

[TinTin]

I just benched @ 750/1800 with no difference from the results below @ 690/1600. My rig is cpu-limited w/a 2.6GHz dual-core Opty

You are still benchinng at 690/1600, coz you unlock the CCC overdrive
However, I also want to see how to control those voltages.
Setting with overclocker tools in 3D mode? then need to also adjust the Vgpu...etc???