Page 5 of 8 FirstFirst ... 2345678 LastLast
Results 101 to 125 of 187

Thread: Crucial says no more 2 gig balistix will be sold.

  1. #101
    Registered User
    Join Date
    Mar 2005
    Location
    Hotlanta, GA
    Posts
    67
    Be aware you may not need 2.8 volts. The set I got from RMA 3 weeks ago are working happily (so far) at stock speed of 250 MHz at 3:3:3:8 on the lowest voltage setting my DFI will take - bios set to 2.5 volts with the 0.3 volt bump disabled, SmartGuardian shows 2.43 volts. My last set took 3 months to fail so it may be a while before we find out if this strategy is effective. Micron gave these things a lifetime guarantee so I intend to run them until they break, and RMA each time they do. I have a set of G. Skill HZ in reserve to cover the gaps.
    -The Mad Duke

  2. #102
    Xtreme Member
    Join Date
    Nov 2003
    Location
    Discovering vCore-to-Strap locks
    Posts
    337
    In the future, when no direct RMA part is available, then what do you think they will do? Give you a replacement of equal value?
    No.

    They will give you whatever they have that is lower than the direct replacement.

    not a good deal if u ask me.
    Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
    4GB OCZ PC2-9200 Reapers
    150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
    BFG 8800GTS OC at 675/2100
    Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
    OCZ GameXStream 850W
    MountainMods U2-UFO 18" Cube Case
    DELL 2405FPW 24" Widescreen LCD
    RME-Audio Fireface 800 based audio production

  3. #103
    Registered User
    Join Date
    Mar 2005
    Location
    Hotlanta, GA
    Posts
    67
    Sorry mate, I do not know what the future holds, and neither do you! I am doing as I wish with product I have bought and paid for. I do not consider the alternatives acceptable - I could not sell these sticks in good conscience - if they fail again some one will be stuck without any means to RMA them since they were not the original purchaser, and that's just not my style. At least this way Micron will have to PAY for their defective product, I'm quite sure all these returns are eating up their margins. Who knows, Micron may decide to do the right thing and replace them with RAM that doesn't die. At any rate, this is a hobby for me, and this way I will have a ring side seat for whatever happens.
    -The Mad Duke

  4. #104
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    OZtralia
    Posts
    2,051
    Quote Originally Posted by The Mad Duke
    Be aware you may not need 2.8 volts. The set I got from RMA 3 weeks ago are working happily (so far) at stock speed of 250 MHz at 3:3:3:8 on the lowest voltage setting my DFI will take - bios set to 2.5 volts with the 0.3 volt bump disabled, SmartGuardian shows 2.43 volts. My last set took 3 months to fail so it may be a while before we find out if this strategy is effective. Micron gave these things a lifetime guarantee so I intend to run them until they break, and RMA each time they do. I have a set of G. Skill HZ in reserve to cover the gaps.
    I see your point Duke, unless they give you a FULL refund your stuck with them

    You could be running your HZ @ 250MHz 3-3-3-6 easily with 2.65Vdimm, maybe even tighter timings (I have'nt tried yet) for a set that only cost you 2/3 the cost of the Ballistic
    lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's

  5. #105
    Xtreme Member
    Join Date
    Mar 2005
    Posts
    245
    I'm on my third set and so far so good. Been running them at 250 3-3-3-7 @ 2.65v

    Q9550 E0
    Abit IP-35 Pro | 4x1gb Ballistix DDR2-800
    74gb Raptor |750gb Samsung | Seasonic S12-500
    EVGA 8800GT SSC | 23" HP L2335 | 20" Samsung 204B
    X-Fi Fatal1ty FPS | Logitech Z-2300 THX 2.1 and Speed-link Medusa 5.1 | Logitech MX1000, G7, G15 and Extreme 3D Pro

  6. #106
    Xtreme Member
    Join Date
    Jun 2005
    Posts
    451
    I mostly worry about it corrupting my windows install as i use my machine for both work and play. it's very hard to reinstall a single os in a dual boot machine, and even worse if i loose data because of sticks that die in the middle of a write process.
    retired AMD64 Opteron 170 Toledo CCBBE 0615EPMW 3.1GHz 1.52V with removed IHS
    Intel Q9650 L827A 4.2GHz (467*9) 1.288v
    G.Skill 8GB F2-8000CL5D-4GBPQ
    ASUS P5Q Deluxe BIOS V1406
    eVGA GeForce 8800GTS SSC 512MB
    3x Western Digital 640GB Black RAID 0+5
    Creative SB X-Fi XtremeGamer
    Swiftech H2O-220 Compact 35C/58C
    Cooler Master Real Power Pro1000 RS-A00-EMBA 1000W
    Dell 2405FPW 24" WUXGA
    Antec Twelve Hundred
    Heatware iTrader eBay

  7. #107
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Pittsburgh, PA (or Lisbon, Portugal)
    Posts
    430
    I Rma'd mines through Newegg. Got a mail saying that they don't have for replacement anymore. Let's see what's the deal they have for me.
    Quote Originally Posted by krille
    Ouchy, go die please, thanks.

  8. #108
    Xtreme Member
    Join Date
    Nov 2004
    Posts
    344
    I'm looking to go 2 GB, but the Crucial sticks were the only ones I was really interested in...

    amrgb, your sig is very funny
    AMD Athlon 64 X2 3600+ @ 3.0GHz||Biostar TF560 A2+||4x1GB Team Xtreem D9s||Visiontek HD3870||WD 250GB||Seasonic SS-600HT
    AMD Athlon 64 X2 3800+ @ 2.6GHz||DFI NF4 Ultra-D||OCZ VX 4000 2-2-2-5||ATI X1900XT||Seagate 320GB||Seasonic S12 600

  9. #109
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by CPLB
    I'm looking to go 2 GB, but the Crucial sticks were the only ones I was really interested in...

    amrgb, your sig is very funny
    If you're willing to wait a couple of weeks, I've heard rumblings about TEAM releasing a 2x1gb kit that will blow everything you see now out of the water.....

  10. #110
    Xtreme Addict
    Join Date
    May 2004
    Location
    Sherbrooke, Quebec, Canada
    Posts
    1,175
    Quote Originally Posted by s7e9h3n
    If you're willing to wait a couple of weeks, I've heard rumblings about TEAM releasing a 2x1gb kit that will blow everything you see now out of the water.....
    Great to know! What will be the release price?

    If they dont die like the Ballistix and perform better that the Ballistix, I'm buying myself a 2x1gb kit of TEAM
    Wolfdale e8400es @4.5Ghz / Ultra-120 Extreme
    2GB Ballistix @ 589Mhz 4-4-4-x @ 2.5V - SPI 32M
    *** Motherboards tested: DFI Blood Iron (current), Asus P5K3-dlx, DFI P965-S, P5B-Dlx, DFI RD600, Bad Axe 2, EVGA 680i, DS3 and P5W DH ***
    Fan modded Zippy 850W, 500GB 7200.11 and EVGA 8800GTX @678/1062

  11. #111
    Love and Peace!
    Join Date
    Dec 2004
    Location
    hiding somewhere!
    Posts
    3,675
    Quote Originally Posted by s7e9h3n
    If you're willing to wait a couple of weeks, I've heard rumblings about TEAM releasing a 2x1gb kit that will blow everything you see now out of the water.....
    and they're definitly different than the sticks of team i have?
    Got a fan over those memory sticks? No? Well get to it before you kill them

  12. #112
    Xtreme X.I.P.
    Join Date
    Jan 2003
    Location
    Huntsville, AL
    Posts
    5,603
    Everything coming from TEAM looks awsome so far, but I've yet to find a US online retail chain that has them.
    24/7 Work & Play Rig
    Gigabyte X58A-UD5, i7 920 @ 4.56ghz 1.48v 21x217, G.Skill PI 12Gb 8-8-8-24-1T 1.56V @ 1736Mhz
    EK Supreme HF P1, Dual EK DCP 4.0 Pumps and EK Res, XSPC RX360 & RX240 w/ 1850rpm GT's
    Sapphire HD 4870 1Gb @ 810/1020mhz, 2x Dell 2407, 2x 1Tb WD Black SATA3, 2x 2Tb Hitachi 7k2000
    Cooler Master ATCS 840, Corsair 750TX PSU, running OSX 10.6.3 & Win 7 64

  13. #113
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by Major
    Everything coming from TEAM looks awsome so far, but I've yet to find a US online retail chain that has them.
    It's cuz they haven't officially launched their US campaign. They will be soon though......

    @ Ozzimark - YGPM comin......

  14. #114
    Xtreme Enthusiast
    Join Date
    May 2004
    Location
    San Diego, CA
    Posts
    761
    What is TEAM?

    intel i7 3770k 4.40GHz
    ASUS Maximus V Extreme
    EVGA GTX 680 FTW
    16GB GSKill 2400MHz
    (1) OCZ Vertex 3 60GB SSD
    (1) Samsung 840 Pro 256GB SSD
    (1) 1.5 TB WD Caviar Green SATA
    Sound Blaster X-Fi Titanium Fatal1ty Professional
    Corsair 700D
    Corsair AX850
    Water Cooled (EK blocks on CPU and GPU, TA 120.4, DDC-1+ with XSPC ResTop)

  15. #115
    Registered User
    Join Date
    Mar 2005
    Location
    Hotlanta, GA
    Posts
    67
    About TEAM - we have to hope they have discovered how to keep Micron 5b chips alive at 250 MHz and above - I note from the MadShrimps review they are using BrainPower PC boards, maybe this will help. It will be a few months after they are widely available before we know much about their longevity. Just thinking out loud here . . .
    -The Mad Duke

  16. #116
    Registered User
    Join Date
    Mar 2005
    Location
    Hotlanta, GA
    Posts
    67
    Quote Originally Posted by Trice
    What is TEAM?
    Read review here:
    http://www.madshrimps.be/?action=get...90&articID=397
    -The Mad Duke

  17. #117
    Love and Peace!
    Join Date
    Dec 2004
    Location
    hiding somewhere!
    Posts
    3,675
    Quote Originally Posted by The Mad Duke
    About TEAM - we have to hope they have discovered how to keep Micron 5b chips alive at 250 MHz and above - I note from the MadShrimps review they are using BrainPower PC boards, maybe this will help. It will be a few months after they are widely available before we know much about their longevity. Just thinking out loud here . . .
    i've never had any issues with anything but the D revision failing. the micron teamgroup sticks are not D dies, unless someone pulled a quick one on me
    Got a fan over those memory sticks? No? Well get to it before you kill them

  18. #118
    Xtreme Cruncher
    Join Date
    Jun 2005
    Location
    MA, United States
    Posts
    1,226
    Quote Originally Posted by ozzimark
    i've never had any issues with anything but the D revision failing. the micron teamgroup sticks are not D dies, unless someone pulled a quick one on me
    Why doesn't crucial use these newer dies? Aren't they 5B-F?


    Heatware | Abit IP35 Pro | Intel E6750@3.8Ghz 1.56v | Storm R2 | Ballistix DDR2-8500 | Sapphire HD3870 512MB@TBA | MCW60 | WD Raptor 74GB | WD2500KS | OCZ GameXSteam 600w | SoundBlaster Audigy 2 ZS | DT770/80Pro | WinTV PVR-250 | Antec P180 | 7 Yate Loon D12SL-12 | AQ50Z | PA120.2 Custom Painted | BIP GTS 120mm | MasterKleer 7/16 Tubing | VX924 | G15 Keyboard/G5 Mouse/Steelpad QCK+

  19. #119
    Love and Peace!
    Join Date
    Dec 2004
    Location
    hiding somewhere!
    Posts
    3,675
    Quote Originally Posted by MikalCarbine
    Why doesn't crucial use these newer dies? Aren't they 5B-F?
    honestly no idea. i was expecting them to, but instead the ballistix got pulled.
    Got a fan over those memory sticks? No? Well get to it before you kill them

  20. #120
    Xtreme Cruncher
    Join Date
    Jun 2005
    Location
    MA, United States
    Posts
    1,226
    Quote Originally Posted by ozzimark
    honestly no idea. i was expecting them to, but instead the ballistix got pulled.
    Bah, if mine do end up dying, I'll RMA (hopefully at least get Z503) and sell em, and switch back to OCZ or get Team They are loooking nice


    Heatware | Abit IP35 Pro | Intel E6750@3.8Ghz 1.56v | Storm R2 | Ballistix DDR2-8500 | Sapphire HD3870 512MB@TBA | MCW60 | WD Raptor 74GB | WD2500KS | OCZ GameXSteam 600w | SoundBlaster Audigy 2 ZS | DT770/80Pro | WinTV PVR-250 | Antec P180 | 7 Yate Loon D12SL-12 | AQ50Z | PA120.2 Custom Painted | BIP GTS 120mm | MasterKleer 7/16 Tubing | VX924 | G15 Keyboard/G5 Mouse/Steelpad QCK+

  21. #121
    Xtreme Legend
    Join Date
    Oct 2003
    Location
    SIENA TUSCANY ITALY
    Posts
    871
    Quote Originally Posted by MikalCarbine
    Bah, if mine do end up dying, I'll RMA (hopefully at least get Z503) and sell em, and switch back to OCZ or get Team They are loooking nice
    I asked an RMA with crucial europe adn they told that there is no chance to replace with the same stiks becouse they are out of production.
    So I decide do get a x850xt vga instead ram...
    Sorry for my bad english, I'm from italy

  22. #122
    Love and Peace!
    Join Date
    Dec 2004
    Location
    hiding somewhere!
    Posts
    3,675
    Quote Originally Posted by giorgioprimo
    I asked an RMA with crucial europe adn they told that there is no chance to replace with the same stiks becouse they are out of production.
    So I decide do get a x850xt vga instead ram...
    i've seen a few guys with the same issue, but then later that day, someone comes in to say that they got an rma for 2 new sticks of ballistix. they definitly have some, you just gotta work your way up a bit i think
    Got a fan over those memory sticks? No? Well get to it before you kill them

  23. #123
    Registered User
    Join Date
    Mar 2005
    Location
    Hotlanta, GA
    Posts
    67
    Quote Originally Posted by ozzimark
    i've never had any issues with anything but the D revision failing. the micron teamgroup sticks are not D dies, unless someone pulled a quick one on me
    O.K., I'll bite. You have experience with Micron 5d chips run above 250 MHz long term and they lived ? My gut is Micron quit making Ballistix PC4000 1 GB sticks because they could not figure out how to consistantly produce chips (in volume) which could handle that level. In other words, someone in management at Micron decided to stop throwing good money after bad. Just like Intel with the Pentium4 they had gone a bridge too far.
    -The Mad Duke

  24. #124
    Love and Peace!
    Join Date
    Dec 2004
    Location
    hiding somewhere!
    Posts
    3,675
    Quote Originally Posted by The Mad Duke
    O.K., I'll bite. You have experience with Micron 5d chips run above 250 MHz long term and they lived ?
    indeed, but no 1gb sticks of ballistix (Read: no 5b D). i've had 4 sticks of 512mb ballistix (all G die), two bought about 3 months ago that are still going strong over 300mhz, two old sticks, one died due to a mistake on my part

    the teamgroup that uses the F dies have been in my possesion for about a month and have shown no signs of slowing down... they have about 2-3 weeks of total use on them.. not really long term yet, but i have not seen any reason to doubt them
    Got a fan over those memory sticks? No? Well get to it before you kill them

  25. #125
    Xtreme Member
    Join Date
    Nov 2003
    Location
    Discovering vCore-to-Strap locks
    Posts
    337
    Quote Originally Posted by ozzimark
    i've seen a few guys with the same issue, but then later that day, someone comes in to say that they got an rma for 2 new sticks of ballistix. they definitly have some, you just gotta work your way up a bit i think
    Amen.

    I had to call 4 times before I got someone to tell me that they were getting in a shipment the following day.

    <--- Crucial
    Q6600 G0 at 3.5 GHz 1.30v on DFI P35-T2R
    4GB OCZ PC2-9200 Reapers
    150GB WD Raptor, 2xWD 120GB RAID-0, 3x320GB HDD
    BFG 8800GTS OC at 675/2100
    Danger Den Based Water Cooling: TDX-775, 8800GPU, DD NB Block on Thermochill PA120.3 Radiator w/ DD 12V Pump
    OCZ GameXStream 850W
    MountainMods U2-UFO 18" Cube Case
    DELL 2405FPW 24" Widescreen LCD
    RME-Audio Fireface 800 based audio production

Page 5 of 8 FirstFirst ... 2345678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •