opteron 146@3451 3dmark and superpi

[steelballzz]

hey guys
i was able to gather some hardware and i was on a sunday bench

opteron 146
dfi ultra-d
2x256 twinmos bh6
and
2x512 ocz pc 4800 EL PL
enermax 600

7800 gtx 256





and for some action


i was able to bench at 3451mhz....




but to take to most out of my mems i lowered the htt and raised the memory



we also did some 2k5


and then for the suicide shot




it was a fine sunday......indeed

thns for your time guys

[DAK1640]

1.8v geez...Does it still work?

[steelballzz]

1.8v geez...Does it still work?

sometimes i feel i am not in the right place to show this.....
with all the 3d action....u talk avout vcore
yes it still works

[Immanuel]

I have the same CPU Cant get it stable at 3GHz, what do i do wrong?
my specs:
Opteron 146 Caybe 0543FPMW
Asus A8N-Sli Deluxe
2 x Kingston PC3500 HyperX

Runing:
FSB 300
HT 3x
Vcore 1.525
Ram Auto.

how much would you advice me to run my Ram?

[Immanuel]

By the way BEAUTIFUL OC :P

[Aerou]

I have the same CPU Cant get it stable at 3GHz, what do i do wrong?
my specs:
Opteron 146 Caybe 0543FPMW
Asus A8N-Sli Deluxe
2 x Kingston PC3500 HyperX

Runing:
FSB 300
HT 3x
Vcore 1.525
Ram Auto.

how much would you advice me to run my Ram?

Post your detailed settings, then we can solve it (maybe), but I dont know about the 0543 Opty doing 3G on air, anyhow, go for 1.6Vcore and raise the voltage of your mobo (from 1.5 to 1.6 or 1.65 and also LDT V). Try to keep your ram low at the start, just to be sure it aint holding you back and most important - always keep your Opty cool, it is very temp-sensitive

[bachus_anonym]

@steelbalz,

Very nice, man What stepping and week code is it? What cooling? Does it need this much vcore to get you there or you are just "warming it up" this way?

EDIT: nvm the cooling, I see now it's Prommy

[DesertShooter]

Nice oc , what can it do @ air?

[steelballzz]

on air it does 3000 at 1,49 v.....occt S&M prime stable

the vcore is needed...the sucka likes it....after 12 hours of bench at this high vcore i had like -8ºc in bios

the stepping and week....well i wrote it down somewhere....cant remember where

[metro.cl]

thats a lot of volts for 34XX i might try something like these on my next benching session i only used up to 1.65V

nice scores by the way

[steelballzz]

@metro-cl
i wish my ocz pc 4800 elite did what yours did...mine hit a wall at 285....

thnxs guys

[Eldonko]

GJ steelballzz

[Aerou]

I wish I had a Prommy or Vapo myself
then I could maybe score like you guys, great results
could you do a SPi 32m run? time?
with does clocks you should score pretty high,
cuz I got only 3GHz and 1.5V on AIR and SPi 32M 25m 18s

[turbox997]

Wow that's awesome. I'm still working on mine, just finished primestable for over 8 hours @ 2.835gHz 1.39volts(i put in 1.425 in the bios settings), I'm on a 9X multiplier in order to get something better out of my ram.

My temps look decent too, under load it seems to stay at 39*-40*C, I'm on air cooling.

Ironically though, I can't get much higher than my current setting, whenever I'm at 2.9ghz +/- territory the computer starts rebooting, even though my temps look fine, should I up the LDT's and chipset? (currently LDT= 1.3v chipset= 1.6v, vcore=1.425..in ITE it doesn't seem to go too much higher)

[afireinside]

1.8v geez...Does it still work?

I've run 2.05v and it still works.