My rigg is fine at 210fsb but 215fsb 3dmark gets fu#k up!

[Oblic]

Hi there ;>


I have a problem man

My speccs is

Ep-8RDA+
1700+@2,1ghz (210x10)
2x256 Pc3200 Twinmos
Vddmode to 1.75

my timings are 6-2-2-2 and the V to it is 2,9V
The Vcore is 1,825 prime95 stabil
Vdd is 1,75V

I got my new T-bred B 1700+ today and its great . I had this problem with my old one aswell !??!?!?! I can run 220fsb in windows and with programs. Havent tried prime95 with 220fsb yet but i will later. When i run 215fsb the 3dmark starts and the graphics is totally wierd man !"####. When i try play cs the game starts and i have like 4fps with my ti 4400! Hmm plz help me Iam using the 31c bios to my board. I have a 40mm fan on the Northbrige and a "passive" heatsink on the SB. They both briges rnt even hot so ..


R

[bowman1964]

well i have a simerlar problem buddy.
mine will bench with prime for hours at 225 72222 3.05v vdd is 1.85 .but try to run 3d2001 and lockup or hang.i can run half way though 3d2001 at 223fsb and will run complete at 200fsb.
i did some quick testing this morning before work and it seams to need more vdd volts.
reason i think that is i was running at 1.82 vdd and it wouldnt pass 3d at 223 at all locking up at startup game 1.but i bumped it slightly to 1.85 and it made it over half way to game 3.so that is the key i think.i tryed more voltage to the ram as high as 3.15 and no diferance.so i think the chipset is the key.
i pushed 1.85v and with air cooling i am worried i am at the max.but i will try to put into my phase change test unit soon to see it it helps.i have access there to -27c coolant to the chipset if i need it.:p

[CCW]

I have a similar problem, my wont run 3d mark 2001 at all nor 2000, does 3d mark 99 perfectly, crashes after a bit ogf cd burnin,

heres the link to some of the ideas people have suggesdted to me:
http://www.xtremesystems.org/forums/...8&goto=newpost


Craig

[Oblic]

Ya i would like to have phase cooling my self

I have tried other timings,agp V,agp mhz, and other stuff

Im on air on my NB but with a 40mm fan so i dont get over 1.85 without good airflow in the case.

Plz come back and teel me if it worked ?


thx m8


R

I`ve test the 3dmark at 2,2ghz runs perfect. But thats with 210x10.5 and with 2.0Vcore. I have heard many ppl that 2.0 isnt good 4 the T-bred B so just testing. With my ti4400 i got 15250points not bad at all ?