Originally Posted by Micutzu
Thanks a lot
Originally Posted by Micutzu
Thanks a lot
E8200
EP45-UD3R
2*2Go OCZ reaper 8500
BFG 8800GTS 640M
i have some mushkin pc3200 lv2 black old bh-5 i could throw in and dump for you wwwww if you need me to.
Last edited by tennvols_69; 01-08-2006 at 04:54 AM.
DFI NF4 Ultra D/3800 x2 @ 2.5ghz/2x512 BH-5/ EVGA 7800 GT /OCZ 600W PowerStream
Great... more happy ocers verry pretty. keep on goin to repair all the ram
But dont fool youre ram and keep the honour to yourself so dont drop other spd's in youre mem where it aint build from!
Last edited by Waus-mod; 01-08-2006 at 04:34 AM.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Part number is a bit wrong. I checked it and timings were 2.5-3-3 that are not typical for any GOLD series.Originally Posted by Micutzu
Can someone attach SPD for OCZ EL 400MHz Gold (NOT VX!)?
OCZ4001024ELDCGE-K
...
Anyone got a dumpfile of Mushkin BH-6 512MB?
sorry hope no one got that dump forgot i pulled my vx and put my tccd in.
DFI NF4 Ultra D/3800 x2 @ 2.5ghz/2x512 BH-5/ EVGA 7800 GT /OCZ 600W PowerStream
Here is some more dumps(i will make twinmos dumps soon also)
Edit: added KHX3200 256mb and Twinmos pc3200
Waus mod: can you put all files in first page(it will make it easyer for evry one later).
Last edited by Lastviking; 01-08-2006 at 05:35 AM.
Waus-mod if this will work on my redline one half dead and one dead you deserve an OSCAR..
benchrigg-Intel i7-965 Extreme Edition-GB EX58-UD5-TRI Channel Corsair Dominator 1600Mhz-2x250Gb Hdd raid 0- Corsair HX 1000W modular PSU-Sapphire HD3870 TOXIC 512MB XFIRE.
24/7 Rig|Gigabyte DS3 rev-2.0|P4 925 D 3Ghz|Crucial PC2 533 D9GMH 2x1024|gainward 7300GS 256mb|120g+200g+200gbhdd+ 2x sata II 200gb+ 350gb sataII|psu Hiper 580w modular
Hey guys,
this is most likely a conflict between cpuz and clockgen. As far as I understand from what you reported, both programs are configuring the smbus in an different way. Therefore, when updating with clockgen, there is a chance that the actual write is made on the SPD. I'm still not 100% sure about what could really happen, but I'll work on adding a fix right now.
Sorry for the inconvenience, it's a chance you noticed the problem.
Franck
I will have some Mushkin pc3500 lvl 2 within a week; if need be I can post a dump then.
Question: do you think this technique will work for TCCD as well? In particular, I am referring to the problems many users experience in not being able to run CAS 2.5 after some time, which I have heard is SPD related. This would make a lot more users happy!
Great find.
DFI LP UT P35-T2R | E8400 Q743A748 - IHS removed
Team Xtreme PC2 9600 2x1GB | Auzentech XPlosion
PCP+C Silencer 750W | 2x36GB Raptors RAID-0 | XFX 7800GT
Iwaki MD20-RZT | FuZion - 4.4mm - modified ProMount | PA120.3
cpuz
Frenchy are not a lot present here
E8200
EP45-UD3R
2*2Go OCZ reaper 8500
BFG 8800GTS 640M
lol hot swap kills both stick and your moboOriginally Posted by Ratax
dont do that
try different mobo, until you find one that can boot it
or try some special spd programmer as i mentioned earlier
Waus-mod: Hmm i stil not get all of this if i have uses 4x 512 and want to write the new spd for only dimm1 how can i do that?(Left hex, and right hex do i dont understand)
here is my dump of corsair 3200ll ver1.1 BH5 256MB stick
Lastviking,
Just look on the tutorial on the first page. As described you get in your dead stick, then load the dump and then the full rewrite function. then gets the spd reloaded and your mem is back alive
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Hmm does not that write it to all sticks?, hmm one more thing i got one of my muskin to have 2-2-2-6 timings and pc3200 speed instead of pc3700 and i cant make it back to orginal with the saved dump from the muskin stick..wierd i think this program got some bugs. All my sticks was alive before and stil is it but i wanted to se if i could make the muskins sticks run with twinmos sticks.Originally Posted by Waus-mod
Last edited by Lastviking; 01-08-2006 at 07:42 AM.
Yes there are SPD programming devices like this:
But they are expensive and not often used. Most RAM manufacturers offer lifetime warranty, so why bother.
...
on mine redline it's does'nt work at all they are the same as before i tryed
benchrigg-Intel i7-965 Extreme Edition-GB EX58-UD5-TRI Channel Corsair Dominator 1600Mhz-2x250Gb Hdd raid 0- Corsair HX 1000W modular PSU-Sapphire HD3870 TOXIC 512MB XFIRE.
24/7 Rig|Gigabyte DS3 rev-2.0|P4 925 D 3Ghz|Crucial PC2 533 D9GMH 2x1024|gainward 7300GS 256mb|120g+200g+200gbhdd+ 2x sata II 200gb+ 350gb sataII|psu Hiper 580w modular
Did they died in a dothan setup? if you follow correctly it will work, if the spd is damaged.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Wow i have the same problem with my CPUZ showing FFF and that i have 2gb mem instead of 512mb
Could some one post a Dump for Corsair PC-3500XMS BH-5 rev 1.1
thx a lot m8
Well after that my CPUZ is showing that i have CMX512-3200LL :O
But i have PC-3500 hmm
Last edited by neoman; 01-08-2006 at 11:04 AM.
no not on a dothan setup, it was on my fx rig but i have to try i out it could have workedOriginally Posted by Waus-mod
benchrigg-Intel i7-965 Extreme Edition-GB EX58-UD5-TRI Channel Corsair Dominator 1600Mhz-2x250Gb Hdd raid 0- Corsair HX 1000W modular PSU-Sapphire HD3870 TOXIC 512MB XFIRE.
24/7 Rig|Gigabyte DS3 rev-2.0|P4 925 D 3Ghz|Crucial PC2 533 D9GMH 2x1024|gainward 7300GS 256mb|120g+200g+200gbhdd+ 2x sata II 200gb+ 350gb sataII|psu Hiper 580w modular
Have got Dump Files for:Anyone got a dumpfile of Mushkin BH-6 512MB?
Mushkin Special 2-2-2 DDR400 512MB BH-6
Infineon 6-A DDR333 256MB BH-6
Infineon 6-A DDR333 512MB BH-6 Link will follow soon.
Last edited by Giana; 01-09-2006 at 01:02 AM.
(\__/)
(O.o )
(> < )
This is Bunny. Copy Bunny into your signature to help him on his way to world domination
Bookmarks