Is everything ok here with my TwinMOS 512mb old BH-5 309WE
It give me sudden bluescreen etc.
What BH-5 dump is suitable for this stick
Is everything ok here with my TwinMOS 512mb old BH-5 309WE
It give me sudden bluescreen etc.
What BH-5 dump is suitable for this stick
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
..and here is unhurt 512mn BH5Originally Posted by Dani
What BH-5 dump is suitable for this stick
- Team Skootterit
- SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
- SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)
I see you can write, so the logical assumption would be that you can read as well.Originally Posted by Dani
Why don't you do it then? There's a link to the right dump file on page number one.
Here is the link:
http://xtremesystems.org/forums/atta...5&d=1136726926
Quote from one of our professors:
"Reality is hiding in the imaginary part."
Dani, take a dump from youre working stick.. and load it it the "damaged" spd.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Waus-Mod, why didn't you add my Twinmos Speed Premium PC3200 512mb UTT BH-5 dump? do you recommend using the "old BH-5" dumps for all the Twinmos BH-5's?
XEON 3075 (3.2ghz for now)
Asus P5E
Crucial Ballistix DDR2-800 2gb (stock for now)
HD3850 512mb (715/945 for now)
OCZ Powerstream 520watt
Coolermaster CM Stacker
No as the warning says its better to load the "original" dump is the right sticks!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
You Are A Legend just fixed my dead stick of ram.Originally Posted by Waus-mod
I have 3 sticks of corsair XMS3500 BH-5, two with a hologram (one of which was dead) and a non hologram one
the non hologram has different spd in cpu-Z strange....
Anyway thank again your a legend i now have 3 sticks to find the best two from
Edit i also have two sticks of ballistix that dont seem to run right since i used them in the dothan rig, i am going to try this on them too
Last edited by Stigggeh; 01-30-2006 at 04:04 PM.
Just like to mention that I just fixed my dead BH-6 with a hot swap. It wouldn't boot in either of my rigs and I'm kinda in the middle of nowhere. I tried with the tape and that didn't work, so I waited till the screen came on and jammed him in.Originally Posted by Victorshen
Not very clever I know but it did work.
@ Stigggeh and snatchmonkey... great guys love it
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Does someone have dump for this stick.
Corsair tccd.
CMX512-3200C2 XMS3202v4.2
XMS3200 512mb 400mhz CL2
hmm, looks like the VX that died in my ultra-d is back again. thx guysOriginally Posted by T_M
np khan just give them the old love again
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Excellent find. If anyone needs Twinmos SP 3500 512 MB 1A4T new BH-5 dump, here it is.
gonna try this on mine. they're only PC3200's though so i know i'm taking a chance. if things don't show an improvement i'll go back to the original SPD dumps for them. gonna try the old BH-5 dump for the TMSP's to see what happens there. if they go kaput then i'll have a reason to get new ram
XEON 3075 (3.2ghz for now)
Asus P5E
Crucial Ballistix DDR2-800 2gb (stock for now)
HD3850 512mb (715/945 for now)
OCZ Powerstream 520watt
Coolermaster CM Stacker
What happens if i dump my kreton BH-5 (6) into my Twinmos CH stick ?
They dont want to run 2-2-2-x togheter =(
*Update* i was bored.
Updated the Twinmos CH stick with Kreton SPD.
It booted just fine =)
On to testing..
I do see myself bying LOTS of unbootable sticks in the future...
Last edited by Ubermann; 02-13-2006 at 11:53 AM.
Everything extra is bad!
Another one down......My BEST 256MB BH-6.....
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Hipro follow the tut m8 they will come back tust me !
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
No go.....I HAVE to replace the SPD chip and reflash it again as I did to my other one.......Originally Posted by Waus-mod
INTEL PWA FOR EVER
Dr. Who my arss...
.........
Really strange there hipro succes with replacing!... pm me for something special
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Hello guys, someone have something for this model of OCZ VX ?
- OCZ PC4000 Dual Channel Gold Edition VX
OCZ5001024DCGEVX-K
- OCZ PC4000 Enhached Latency Dual Channel Gold EditionVX
OCZ5001024ELDCGEVX-K
thank you !!!
-Asus P5E @ Rampage Formula 0902
-Intel Q9650 @ ???
-Corsair xms2 2x2gb
-Crucial pc8500 2x1gb
-Ati 4890
-Intel X25-M G2 80gb
-Seagate 500gb sata2
-Seagate 1500gb sata2
-Maxtor DiamondMax 10 300gb sata
-VAPOCHILL LS Black " now not working"
-OCZ Gamextreem 700W
-Thermaltake BigArmor VA8000 Black Metal
-Creative X-FI extreem music
signed
Sorry for my bad english, I'm from italy
me too....Originally Posted by giorgioprimo
Originally Posted by Langley
who are you?
ciao Langley !!
-Asus P5E @ Rampage Formula 0902
-Intel Q9650 @ ???
-Corsair xms2 2x2gb
-Crucial pc8500 2x1gb
-Ati 4890
-Intel X25-M G2 80gb
-Seagate 500gb sata2
-Seagate 1500gb sata2
-Maxtor DiamondMax 10 300gb sata
-VAPOCHILL LS Black " now not working"
-OCZ Gamextreem 700W
-Thermaltake BigArmor VA8000 Black Metal
-Creative X-FI extreem music
Anyone have the dump file for GEIL ONE ES and S version?
Tx!!!....
I never used it and it has just told me trial is expired... why?
I can't use it...
Puni's rig _.->*new?D*<-._ PRIME STABLE OC - CLICK HERE: Cooler Master HAF X NVIDIA EDITION Asus M4A89TD PRO/USB3 + AMD FX-8350 @210x21=4,42Ghz blue voltages (NB/HT @2320Mhz/2730Mhz) + Asus/Zotac GTX580 SLI @851-1702/4204Mhz 1,063V + 8GB of Samsung 30nm DDR3 @1966Mhz 9-9-9-27 1,5V | Caviar Black 3TB SATA III RAID0 | BenQ XL2420TX NVIDIA 3D Vision 2 Lightboost ready | Win7x64 | 3DMark11 - CLICK HERE | 3DMark Vantage - CLICK HERE
Bookmarks