[Asus+Dothan]Dead BH5 - Here is the TUT to fix it!

[200%absolut]

There you go, few BH-5 dumps.

Thanks a lot

[tennvols_69]

i have some mushkin pc3200 lv2 black old bh-5 i could throw in and dump for you wwwww if you need me to.

[Micutzu]

Let us have it, dump and post here.

[Waus-mod]

Great... more happy ocers verry pretty. keep on goin to repair all the ram
But dont fool youre ram and keep the honour to yourself so dont drop other spd's in youre mem where it aint build from!

[kiwi]

There you go, few BH-5 dumps.

OCZ PC3200 Gold 512MB (new BH).zip

Part number is a bit wrong. I checked it and timings were 2.5-3-3 that are not typical for any GOLD series.


Can someone attach SPD for OCZ EL 400MHz Gold (NOT VX!)?
OCZ4001024ELDCGE-K

[audiojunk66]

Anyone got a dumpfile of Mushkin BH-6 512MB?

[tennvols_69]

sorry hope no one got that dump forgot i pulled my vx and put my tccd in.

[Lastviking]

Here is some more dumps(i will make twinmos dumps soon also)



Edit: added KHX3200 256mb and Twinmos pc3200

Waus mod: can you put all files in first page(it will make it easyer for evry one later).

[chefnr1]

Waus-mod if this will work on my redline one half dead and one dead you deserve an OSCAR..

[cpuz]

Hey guys,
this is most likely a conflict between cpuz and clockgen. As far as I understand from what you reported, both programs are configuring the smbus in an different way. Therefore, when updating with clockgen, there is a chance that the actual write is made on the SPD. I'm still not 100% sure about what could really happen, but I'll work on adding a fix right now.
Sorry for the inconvenience, it's a chance you noticed the problem.

Franck

[ixtapalapaquetl]

I will have some Mushkin pc3500 lvl 2 within a week; if need be I can post a dump then.

Question: do you think this technique will work for TCCD as well? In particular, I am referring to the problems many users experience in not being able to run CAS 2.5 after some time, which I have heard is SPD related. This would make a lot more users happy!

Great find.

[200%absolut]

cpuz

Frenchy are not a lot present here

[Victorshen]

My system doesn't post with the bad stick in.
So you're saying that we must slot in the "dead" stick while the system is with windows loaded allready? I mean, slot in the stick with the system running?

lol hot swap kills both stick and your mobo
dont do that
try different mobo, until you find one that can boot it
or try some special spd programmer as i mentioned earlier

[Lastviking]

Waus-mod: Hmm i stil not get all of this if i have uses 4x 512 and want to write the new spd for only dimm1 how can i do that?(Left hex, and right hex do i dont understand)

[Victorshen]

here is my dump of corsair 3200ll ver1.1 BH5 256MB stick

[Waus-mod]

Lastviking,

Just look on the tutorial on the first page. As described you get in your dead stick, then load the dump and then the full rewrite function. then gets the spd reloaded and your mem is back alive

[Lastviking]

Lastviking,

Just look on the tutorial on the first page. As described you get in your dead stick, then load the dump and then the full rewrite function. then gets the spd reloaded and your mem is back alive

Hmm does not that write it to all sticks?, hmm one more thing i got one of my muskin to have 2-2-2-6 timings and pc3200 speed instead of pc3700 and i cant make it back to orginal with the saved dump from the muskin stick..wierd i think this program got some bugs. All my sticks was alive before and stil is it but i wanted to se if i could make the muskins sticks run with twinmos sticks.

[kiwi]

Yes there are SPD programming devices like this:



But they are expensive and not often used. Most RAM manufacturers offer lifetime warranty, so why bother.

[chefnr1]

on mine redline it's does'nt work at all they are the same as before i tryed

[Waus-mod]

Did they died in a dothan setup? if you follow correctly it will work, if the spd is damaged.

[neoman]

Wow i have the same problem with my CPUZ showing FFF and that i have 2gb mem instead of 512mb

Could some one post a Dump for Corsair PC-3500XMS BH-5 rev 1.1

[HiJon89]

Wow i have the same problem with my CPUZ showing FFF and that i have 2gb mem instead of 512mb

Could some one post a Dump for Corsair PC-3500XMS BH-5 rev 1.1

Not sure if you 512MB or 256MB but here are both:

[neoman]

thx a lot m8

Well after that my CPUZ is showing that i have CMX512-3200LL :O
But i have PC-3500 hmm

[chefnr1]

Did they died in a dothan setup? if you follow correctly it will work, if the spd is damaged.

no not on a dothan setup, it was on my fx rig but i have to try i out it could have worked

[Giana]

Anyone got a dumpfile of Mushkin BH-6 512MB?

Have got Dump Files for:

Mushkin Special 2-2-2 DDR400 512MB BH-6

Infineon 6-A DDR333 256MB BH-6

Infineon 6-A DDR333 512MB BH-6 Link will follow soon.