Oh and with XP SP2.Originally Posted by dinos22
Hi LV, as you must know i hav a KHX3200 339we.
The thing is that mine´s do 289 2-2-2-0 3,86v spi 1m on a SLI-DR. I´ve been trying with upper vdimm (up to 3,99v) reaching 293-294fsb with systool but spi crashes in the middle loops.
I saw that your memories tolerate well 4v, did you noticed similar things before you burnt the memos?
Thanks.
8088 7.15mhz, 512k RAM, CGA@Number Nine 256k, HD 10mb, MS-DOS 3.20v, etc... those wonderful years
I have stil not burned in my memos, only 8/7 use with nf2 before.Originally Posted by Xevipiu
8088 7.15mhz, 512k RAM, CGA@Number Nine 256k, HD 10mb, MS-DOS 3.20v, etc... those wonderful years
LV, what can the sticks do @ 3,2v? 20c room temp
mines:
Sticks that do high mhz on low vdimm dont always mean they do high mhz with high vdimm , but i will try it later.Originally Posted by DesertShooter
I still think there's only a SMALL window that this is possible @. It takes a totally optimised install with some very good HW. I just don't do the "optimising" part Here's the best I could do:Originally Posted by dinos22
Now that I look at the numbers, there may be a better possibility with the Expert, but mine's dead
Here the "2x512Mushkin3500LevelII" 340wf of my old friend KrampakOriginally Posted by FriGidi
Very good memosOriginally Posted by krampak
Last edited by Xevipiu; 01-08-2006 at 01:17 PM.
8088 7.15mhz, 512k RAM, CGA@Number Nine 256k, HD 10mb, MS-DOS 3.20v, etc... those wonderful years
Damn, 300Mhz 2-2-2-5 is extreme
Nice work m8
Congratulations. That is some awesome speed
wowOriginally Posted by FriGidi
Nice sticks u got there LastViking !
CPU : Intel Core 2 Extreme QX9650
MB : Asus P5E X38 Rampage bios
RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
VGA : Sapphire 4870
Power : Antec Quattro 850w
Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
DVD : Samsungs DVDwriter Sata + Liteon DVD
Sound : Creative XFI Xtrememusic
Cooling : D-Tek Fusion + D-Tek Fusion GFX
Monitor : Samsung 226BW
Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.
BH-5 For Life
Nice bench
2500K, 6970, Acer 245HQ
E8400@3.85 + Vdroop P5K
Wow !!
whats your highest mhz with TRP @ 1?
All along the watchtower the watchmen watch the eternal return.
I will try when i got my new board and some another stuff, Tryied 301.5 yesterday but its hard i did about halv of the super pi1mOriginally Posted by STEvil
AWESOME!!!
Is there any way that I can see the complete timings on your A64 tweaker?
ASUS Crosshair V *Water* | FX-8150 Enzotech Sapphire CPU block | 8GB Mushkin 2133 | 6970 2GB | 240GB OCZ Vertex 3 | SB X-Fi Elite Pro | Corsair 520W Modular | 3x 26" Asus VW266H Eyefinity 5760x1200 | DDC pump with petra top @ 18w, Thermochill HE 120.3 w/ 3x120x38mm Deltas 152cfm on controller |
--------------------------------------------
My Heatware (1000+ flawless)
All the timings that i have changed are in the screen the another ones are stock.Originally Posted by g0dM@n
Right sticks and some cold air and dont use paint before you got a good score, paint will make super pi fail if you dont reboot after you have use it.Originally Posted by blander
AD0 board on the way to me now, but the temp outside is hoter now :/
I stil have problems with 3.85v-> stabilty with 2x512mb (and thats with muskin,corsair,twinmos sticks)
We were trying 3.98v and it was stable, without loosing performance. The truth is that it surprised me! It's a pity I didn't try more than 4v
cooling: 1x Delta 120x120x38 4000rpm 190cfm (+60db )
Regards
8088 7.15mhz, 512k RAM, CGA@Number Nine 256k, HD 10mb, MS-DOS 3.20v, etc... those wonderful years
Bookmarks