DOTHAN 770 + ATI X800XT PE + 3DMark2001 = World Record...

[lawrywild]

I wish I HAD a system to put one in...but sadly, my shuttle won't be built until early spring next year.

oh well, atleast it should be good, I've always wanted to try out a shuttle, even more so when I saw they're bringing out a Dothan/Pci-e one

[hipro5]

LOL! Low vga volts most people probably cringe at 1.83vgpu... I run it on water Knowing hipro I wouldn't be surprised to see 2.2v into that card!

I'm at 1.83VGPU ONLY coz VGA Core can't handle more than this with ONLY -5*C under load.....

[hipro5]

well done hipro5 .....
let us watching you kicking some "green" butts in http://www.thelab.gr

Later on......Don't worry.....

[hipro5]

I'm sorry but the real WR with X800XT-PE is http://service.futuremark.com/compare?2k1=8711011

It's a Asus X800XT-PE flashed to X850XT. If not flashed it's found like a 7000 mobility card, some kind of bug in the original bios.

But really gr8 results hipro5.

Are we OK now.....?.....




C O M P A R E URL.......


.

[wampir]

Oh God please stop this world I wanna get out
Congratz !!

[Gautam]

Which low VCore?.....CPU's?....or VGA's......

CPU VCore. 1.57v sounds a little low, seen some say 1.7v+ is worth it. What have you found?

[hipro5]

CPU VCore. 1.57v sounds a little low, seen some say 1.7v+ is worth it. What have you found?

Over 1.5885 I get no better at all with this CPU or the 740 one.......

[Gautam]

Ah, thanks. Heard the same from plenty. Guess these thingers just aren't voltage lovers.

[Cornelious0_0]

Are we OK now.....?.....

MAN.....we gotta see that CPU cranked...so much potential there.

[rcchong]

[QUOTE=hipro5]
.......

Ram: 2 x Kingston Value Ram PC2700(DDR333) BH-6 chips
......
DDR Maximizer for Vdimm
......
Ram Vdimm: 3.6Volts
......
Running frequencies:

......
Ram = 251MHz @ 2-2-2-5 ALL Turbo + REAL PAT by booting at 200MHz fsb

More to come.....

will ... ddr333 ram running at ddr500
the rating guy at kingston just got fired :-)

will done hypro

ps :got to check my local garage sales for those bh5.....

[hipro5]

So close with OPP with so low CPU-GPU frequencies.....

THERE YOU GO....


I think that I HAVE to fill my Prommies with R410 gas......

[Cornelious0_0]

So close with OPP with so low CPU-GPU frequencies.....

THERE YOU GO....


I think that I HAVE to fill my Prommies with R410 gas......

Nice...you better, we really need to see what they can do...44k must be broken.

[hipro5]

Nice...you better, we really need to see what they can do...44k must be broken.

I'll get tommorow R410 and I hope to break the 3300MHz barrier of my Dothan and I also hope to reach about 770 - 780MHz on the VGA.......

[Cornelious0_0]

I'll get tommorow R410 and I hope to break the 3300MHz barrier of my Dothan and I also hope to reach about 770 - 780MHz on the VGA.......

Yeah, I'd say that'd probly do it...best of luck to you man, I'll be waitin' to see what you can do.

[x3ro]

I'll get tommorow R410 and I hope to break the 3300MHz barrier of my Dothan and I also hope to reach about 770 - 780MHz on the VGA.......

Good luck with it!

Regards

[Jort]

So close with OPP with so low CPU-GPU frequencies.....

THERE YOU GO....


I think that I HAVE to fill my Prommies with R410 gas......

refill with R507 and they will be fine.

me and a friend build a gfx phase change few months ago with a 1/5hp compr

look at the temps with the X850XT


no bad contact or something?

[CrashOv3r1De]

Congrats dude your're #1 Hows the Xt Pe looking?

[gergo]

Nice scores.

[Cornelious0_0]

refill with R507 and they will be fine.

me and a friend build a gfx phase change few months ago with a 1/5hp compr

look at the temps with the X850XT

Looks good, not to thread-jack...but got any pics of that setup or the phase unit?

[Jort]

http://www.belgium-coolingsolutions....Colin_Gfx_unit

the blondy is me

[Cornelious0_0]

http://www.belgium-coolingsolutions....Colin_Gfx_unit

the blondy is me

Awsome man, thx.

[hipro5]

refill with R507 and they will be fine.

me and a friend build a gfx phase change few months ago with a 1/5hp compr

look at the temps with the X850XT


no bad contact or something?

I'm at -45*C Idle @ 756MHz with 1.87VGPU......When I run 3D, the VGPU climps at 1.98VGPU and with all that load, the temp of the GPU goes down to -5*C on a heavy bench......R410 in the same Prommie could handle a P4 3.4EE CPU at 2.07VCore and about 250Watts of load......

Here's a run with the exact same setup a few months ago filled with R507....... http://service.futuremark.com/compare?3dm05=575717




EDIT: The same VGA with the same Prommie(filled with R410) a few months ago, was doing 780MHz GPU and 702MHz Rams.....

[hipro5]

Congrats dude your're #1 Hows the Xt Pe looking?

Awfull........

[Jort]

I'm at -45*C Idle @ 756MHz with 1.87VGPU......When I run 3D, the VGPU climps at 1.98VGPU and with all that load, the temp of the GPU goes down to -5*C on a heavy bench......R410 in the same Prommie could handle a P4 3.4EE CPU at 2.07VCore and about 250Watts of load......

Here's a run with the exact same setup a few months ago filled with R507....... http://service.futuremark.com/compare?3dm05=575717


EDIT: The same VGA with the same Prommie(filled with R410) a few months ago, was doing 780MHz GPU and 702MHz Rams.....

i understand, wow 40° difference is pritty mutch

[Cornelious0_0]

i understand, wow 40° difference is pritty mutch

No kidding, especially under phase...what a climb.