i am very happy with my expert board, no problam at all so far (month)
My DFI Expert died
Multiple DFI Experts that I have owned have died
My DFI Expert died and took the CPU/other component(s) with it (Please specify)
My DFI RDX200 died
Multiple DFI RDX200s that I have owned have died
My DFI RDX200 died and took the CPU/other component(s) with it (Please specify)
Just the CPU/RAM/etc. bit the dust, but the board still "works" (Please specify)
Everything has been problem free from day one
I own multiple boards and they're all flawless
i am very happy with my expert board, no problam at all so far (month)
Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|
RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1
Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX
i edited the poll and removed one vote from each option as one member had voted for all options
Originally Posted by Onepagebook
I don't, could your share the secret?
Intel Conroe E6400 - Intel P965 - 4GB DDR2 - 8800GTX - 320GB Western Digital - Dell 2007WFP - Windows Vista Ultimate
bios chips different size possibly (2mb/4mb).Originally Posted by alpha0ne
All along the watchtower the watchmen watch the eternal return.
Should flash under DOS with AWDFLASH and parameters: /cc /cd /cp /sn /py /cks /F Should work - I did flash under NF7-S
Wow, fatalities are close to 10%. It's not looking good thus far.
The two bios chips both have identical markings, I have been doing this for a looooong time now and always use all the swithces in dos so is this another Expert fault ???Originally Posted by STEvil
My spare bios chip works OK in an Ultra D so it is not damaged in any way
Anyone else care to try ????
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
hmmmm maybe the expert writes something else to the bios chip? on the bios chip you flashed that part is missing and hence the board doesnt boot with it?
Might be the tool in that case.. but every time i've had this issue it was because the chips were different densities and I was trying to flash a 4mb bios image onto a 2mb chip..Originally Posted by alpha0ne
All along the watchtower the watchmen watch the eternal return.
But those are THE SAME SIZE chips so it's not about it.
When I wanted to flash (Written with other BIOS chip) for the first time the chip was Erased, but there was a Write Protection Problem
When I used all Parameters /cc /cd /cp /sn /py /cks /F of AWDFLASH uder DOS the Chip was correctly written with Expert BIOS 12.07 beta
I'm going to try one more time (already tried 5 times ) and if it does not work again I will try to RMA the board
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
Maybe buggy chip like in Abits NF7-S sometimes. I was lucky and had no probls with NF7, but many people had - for sure U know that even enter to BIOS was impossible time to time.
Hehe yer I had 4 boards with the Nforce 2 chipset, one of them the NF7-S Ver2, buggy POS though very high performance in their dayOriginally Posted by Hirotaro
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
Wow, those poll results are REALLY disturbing.
Intel i7-3770S l Thermalright Venomous X l Asus Sabertooth Z77 l 8GB G.SKILL Sniper Low Voltage l ??? l Samsung 830 256GB l Areca ARC-1200 l WD Caviar GreenPower 1TB (RAID1) l Pioneer BDR-207DBK l Creative X-Fi Titanium HD l Kingwin Stryker l Antec SOLO II l HP LP2475w
Tell that to DFIOriginally Posted by Bar81
I have seen quite a few peeps here try to downplay the h/ware lost to Expert with the usual BS like outa hundreds/thousands its only a small percentage, well IMHO that percentage is increasing all the time and DFI are doing what as far as informing the users...............sweet FA
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
My RDX200 went tits up Thursday night, Flashed bios, cleared cmos... and nothing
杰森
I can picture in my mind a world without hate, a world without violence.
And I can picture us attacking that world, because they'd never expect it.
how did it happen?
shut the board down and then when you wanted to reboot it was dead?
is the cpu ok? and the mem?
were you running oced? what settings?
2 weeks running this setup, not any problems at all.
Q6600 L723A (400 x9)
Evga 780i P02
G.skill 8 GB
Evga GTX 280
Raptor X (3) 150's Raid 0
Targen BZ 1100w
Thermalright Ultra Extreme 120
Vista Ultimate x64
Xclio
why are you rmaing it then?Originally Posted by CrashOv3r1De
Also today...Originally Posted by JasonDTM
Originally Posted by JasonDTM
hmmmm
DFI RDX200 smoking
Some old school BH-5 loving..
286MHz @ 2-2-2-5-1T
Sorry Jason - hope nothing else went along - especally after I said it was all good to go...Originally Posted by JasonDTM
Originally Posted by Hirotaro... please read slower.Originally Posted by STEvil
All along the watchtower the watchmen watch the eternal return.
Originally Posted by STEvil
Don't understand => Same Chips, Same Size (both 4MBs, both LPC/FWH
PMC4 type) so what is Ur post about???
Only thing could be older version of AwdFlash. But I believie, that Our Friend uses the One given with BIOS - that means the One that Manufacturer expects U to Use.
Or maybe U're talking about EEPROM Writer?? But He said He want's to do Hot-Flash
Last edited by Hirotaro; 12-20-2005 at 02:39 AM.
Bookmarks