keep up the good work! I hope you too can join the elite ranks of 50k!
keep up the good work! I hope you too can join the elite ranks of 50k!
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
ThanksOriginally Posted by k|ngp|n
IHS still on and doubt will be off because without it perfect contact with cascade CPU evaporator is almost possible..
I think 3.930mhz or more 2001 runs will be possible, but my good old Corsair BH-5's maxed at around 260 in the Expert.
3dmark 2005 and 2003 runs at more than 3.900 also may be possible, to bad the 2nd 7800GTX is not a great overclocke like the 1st one.
This single card run is just with core mod, vdd a vmem not work but we find to right way to do it already.. my goal is doing some runs with booth cards at 800-2000 at least ..cooling of the cards in SLI is not a problem at all - Ricky's SLI cascade effectiveness is really amazing
Last edited by Pedro Rocha; 12-02-2005 at 05:27 PM.
Pedro do you have any clue of the overclock on those cards stock cooled...i mean in coolbits (detect optimal frequency) just to compare with mine ...
Wish you guys good luck in further benchmarking sessions
"God...i know she's dead :'( but keep her soul alive because in my heart she will never die :'(" VoRtAn_MaDgE
Nc te eskecerei avĂł! :'(
Nice run Pedro & Ricky
Killer cpu + powerful cascade you got there.
Any updates fellas??...I here you guys are planning some big cpu numbers on then FX
Nice results! Shame to see all these FX57s not liking the cold
An interesting thing, we never see the faces of our much acredited tweakers I think there was one where we saw your faces...
In short, both AMD and NVIDIA discovered that their next-generation graphics cards are superior to each others' last-generation graphics cards.
They are probably concerned of too many groupies!Originally Posted by perry_78
Awesome clocks on the FX - will do wonders for SLI!
some nice pics of bench rig
3dmark addict
phase-change addict
dirty benching addict
tits lover
Now thats a neat setup
But how do you manage? - If I use the 4v jumper, the mosfet reaches an insane temperature, and I dont doubt u use that for bench
Why havnt ya got a fan over the darn thing? And whats the slimmy red stuff? (dielectric crap? )
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
Originally Posted by M.Beier
I bet everything on that mobo is cold
there is sub zero temps on both PCI slots and the SKT Iam sure the mobo is absorbing all the heat those fets are producing.
would be interesting to know the temps under load just to see how low they are
i7 6700K @4.8 ghz
XSPC RayStorm (very nice block)
Z170 Sabertooh ,, 32GB- Gskill (15-15-15-36 @3600 mhz) 1:1
XFX-7970 with Swiftech Komodo nickel block
Water Cooling - MO-RA3 Pro with 4 Silverstone 180mm @ 700 rpm, Twin Vario mcp-655 pumps
Samsung 850-1TB SSD,, OCZ ZX-1250W (powerfull and silent)
Crossfire 30" decent monitor for IPS too bad SED tech died
Docsis2.0 Docsis3.0
-- People who reject the idea that "government has a responsibility to reduce income inequality" give an average of four times more than people who accept that proposition.
Almost every CABNE 0530APMW seems to do around ~3880MHz. I have one here, no mather what I do I cant get it over 3900MHz (coldbug around -100C, my 0512UPMW coldbugs a bit over -130C). The 0530 looks to be the dream cpu for a 2-stage cascade though Or a -100C LN2-containerOriginally Posted by k|ngp|n
Or DICE ?Originally Posted by Kinc
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
Watching this for sure...kick a$$ seeing you two back in business.
no way that dryice can reach -100°COriginally Posted by M.Beier
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
Yeh.. don't you just hate those annoying -130C+ coldbugs.Originally Posted by Kinc
Sys1. Air - Dothan 780ES | P4GD1 - Xtreme Systems Edition - VDD mod | Corsair TWINX 1GB (2x512MB) 3200 XL PRO 2-2-3-5| XFX 7800GT
(Heatware) (New online folio!)
ANy updates
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Bookmarks