As for the voltage...just make sure your temps are kept good and decent with any clocks you have. The heat will let you know if there is too much voltage on it or not.
As for the voltage...just make sure your temps are kept good and decent with any clocks you have. The heat will let you know if there is too much voltage on it or not.
Well so far with stock voltages I can hit 37k in 3dm01. This at 670 800. Is there any way to monitor temps while running 3dmark? I do not see a way in the ati tool to keep temps always on top.
i7 920...Intel DX58SO
12gb Patriot Viper Xtreme
Palit GTX 560 ti 2gb SLI
Antec Quattro 1000...Twelve Hundred Case
Intel X25-M 80gb x 4 Raid 0...Hitachi 7K3000 2tb
Sony GDM-FW900...Z-5500...X-Fi Forte
Wow, 10536 new 5.12 Cats, slighty higher clocks at 735/870. Temps reached 70C though! and 3dmark 03 froze, so i guess this is my limit? Temps seem way to high though compared to your's EVA? 100% fan speed.
http://service.futuremark.com/compare?3dm05=1537302
Kentsfield Q6600@ 3100Mhz
Asus P5B-E Plus
2GB GSkill DDRII PC6400GBHZ
Albatron Geforce 8800GTX
Silverstone Temjin TJ-09
Thermalright Ultra 120
Corsair 620W HX
74GB Raptor/ X-Fi Platinum
19" CRT NEC 930 SB
Windows XP Pro SP2
yeah i'm 100% fan speed on mine
just tried cat 5.12 betas and 5.12 officials and definitely lower scores by -50pts in 3dmark05 and -100pts in 3dmark2003, probably better for dual core cpus instead of my single core cpu heh
---
I have just the X1800XT(512) since some hours now, nice card FEAR run really fine...
I have begin trying OC them, but with official 5.12 and at this time.
First result at stock GPU speed,mipmap HQ, card out of the box.
CPU 2.95Ghz: stock 9'131
- 650/780, 9'441. same settings.
- 670/780, 9'771 "" ""
This is just for a try after install the card, i will look what i can have this week-end when i have time for applied the info you give for OC the card, and pehraps install the card under water if i find time.
This card seems clock really well with little a OC lol
I have see you talk about the OC tool, from Driver Heaven but i have not find this soft on their site.. What is the exact name of the tools, and where i can find it, plz ?
Other question, Is there a tweak for modify the max OC possible in CCC?
Last edited by Lane-k; 12-09-2005 at 03:35 PM.
Thanks so much, i m just under 10K yet with the CCC Overide... I need too get my OCZ 4800 TCCD( in RMA) for have a better OC of my CPU, and a Full Bandwith at 680Mhz.. In wait i use Corsair with Divider, CPU is only at 2.9-3.0Ghz..Normally im around 3.1.
Nice card, i come from SLI Nvidia looking to this card i can imagine how work
2x 7800GTX 512Mo.
I have recieve info as Innovatek release a model of watercooler for this card soon looking certainly like the Coolmatik for G70. But pehraps soemone know a good waterblock for this ATI?
Edit: I have forget something, i have read it's needed use the 2D clocks, it's inverted on the OC tool? or it s needed change somehting on driver too..
I have forget too the most important.... Nice work EVA2000 !!!
-----------------------------------------------------------------------------------------------------------------------------------------
Strange thing, if i use the Overclock tool or the ATI Tool, after set the clock speed, i have blue and red lines appears on screen, the temp. seems correct..
i have fan at 100%, more strange this is happend with the same clock speed i use with the CCC Override, and i have not this with this one.
I ask me if there's a possibility in my case the voltage is not set like for 2D, remembering the Nhibitor for modify the bios of Nvidia card and the 3 postions throttle of voltage: 2D, open and up of the 3D speed and full voltage for the 3D. there's too the problem of multiplicator, make me think to the 3 clock point in the 7800GTX, The processor is divided in three part and all don't work at same speed.
Normally i install my watercooler during this week, i just ask me if AS5 can be use in wait for reduce the temp of the card?
Last edited by Lane-k; 12-11-2005 at 02:00 AM.
Well a few folks have pm'd me asking for my 512MB HIS X1800XT's stock bios and i only got around to doing this with ATIFLASH to save my HIS X1800XT's bios
here's link to my 512MB HIS X1800XT stock bios
http://fileshosts.com/ati/files/X180...S/original.zip
usual disclaimers when flashing cards etc - it's not my fault if you screw up your card heh
---
Well I could have even hosted that file people LoL
All well. I went back to using Stock BIOS. I have seen some peoples MAX clocks drop alittle with the new one.
I just got my card yesterday, bba x1800xt, put on water. Here is what I get so far.
Originally Posted by eva2000
Its' interest me like you have the same card as me if we have same original bios... living in Switzerland the trip of card for coming is so hazardous i m just curious to see if different revision have be made..
my is p/n 113-A52001-102 (.rom)
----------------------------------------------------------------------------------------------------------------------------------------
[QUOTE=Plywood99]I just got my card yesterday, bba x1800xt, put on water. Here is what I get so far.
I see one thing intersting me you have use the ATI.TOOL for Oc the card?
Tweaks with the 2D clock ( Ati-smart and hot key disable)?
Can i ask you too the voltage you have use?
Last edited by Lane-k; 12-24-2005 at 03:26 AM.
Yes, ati smart and hotkey disabled. Volts 1.475 core, 2.1 mem.Originally Posted by Plywood99
Bookmarks