Don't know if this is the right place to ask, but I was wondering if there were any skilled repairmen out there
I had this board for quite a while and then it was in someone elses hands for a while and they killed it scratching some traces with a screwdriver. Can this sucker be fixed? Can any Xtreme members help me out? Thanks in advance.
Dominic
Cursed be the ground for our sake. Both thorns and thistles it shall bring forth for us. For out of the ground we are taken for the dust we are and to the dust we shall return
Heat
i think the silver trace pen used to unlock cpu's can be used
DFI Lan Party Ultra B
Athlon Xp 2500 unlocked
BBATI Radeon 9800 xt 450/400
2x OCZ PC3500 Platinum Limited Edition Bh-5
SLK900-U & 120mm 200CFM fan
80GB 8MB WD JB800
Lite-On Dual Format 4x DVDRW
Lite-On 48x24x48 CDRW drive
Kingwin KT-436 Blue with 3 blue tinted windows
TTGI 420w psu
KDS 19" Flatscreen Avitron
Logitech Mouse & Keyboard
FujiFilm 3.2mp 6x opt zoom
Klipsch 4.1 speaker system
www.OverclockersHQ.com
3dmark score
Tried that, but the traces are so small, the pen covers two or three of them.
Cursed be the ground for our sake. Both thorns and thistles it shall bring forth for us. For out of the ground we are taken for the dust we are and to the dust we shall return
Heat
u'd have to be really carefull and tape off the other traces and paint one at a time.. like a little XP unlocking
| Intel i7 3770K | Custom H2O | Gigabyte z77x-ud5h | 16GB Samsung | GTX680 | 240g Mushkin Deluxe |
-METALLICA-
About the only way I see it possible is to tape off each trace individually and after you reconnect the trace, you'll have to apply some kind of laquer to protect that trace from the next one. Good luck there
Posting Permissions
Reply With Quote
Bookmarks