GeIL ONE W 400MHz Dual Channel Kit
As for the BH version of GeIL ONE, it is capable of running at DDR 400 CAS 1.5-5-2-2 and DDR500 CAS 2-5-2-2
Specifications
* Available in 512MB and 1GB Dual Channel Kit
* GeIL ONE hand-picked BH5-UTT 32Mx8 DDR Chips
* 184pin, Non-ECC, Un-buffered DDR DIMM
* Platinum Copper Heatspreader
* Retail Package
* Lifetime Replacement Warranty
* Voltage: DDR400 2.75v~2.95v
DDR500 3.4v~3.5v
*Disclaimer ¡V Attention all users of GeIL ONE W (BH) Series, in order for your GeIL ONE W (BH) to be covered in the full lifetime warranty policy, the modules must be working under the below requirements of condition.
Voltage: All GeIL ONE W (BH) memory modules require a working voltage range between 3.4V ~ 3.5V @ DDR500
Cooling: All GeIL ONE W (BH) memory modules require sufficient cooling. A 15~25CFM (Cubic Feet per Minute) of direct airflow towards the modules is strongly recommended. This could be easily accomplished with an 80mm low rpm fan installed on the side panel of the chassis/case. Modules that are not properly cooled may not meet the rated timings/speeds stated in official spec and could become susceptible or premature.
Bookmarks