+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 25 of 49

Thread: Benching VooDoo2

  1. #1
    Xtreme Russian xooler's Avatar
    Join Date
    Nov 2004
    Location
    Russia,Saint-Petersburg
    Posts
    250
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Smile Benching VooDoo2 - Single voodoo2 WR ?

    Guys i have two cards VooDoo2 12Mb noname & Diamond 8Mb.
    I have some benches with this oldschool cards.
    In 2k1 voodoo2 12Mb @640x480 got 1578 3DMarks
    I use drivers from 3dfxzonet.it ,but ORB won't publish my results
    May be someone can send my old official 3Dfx drivers for 98SE ?
    On monday i can get 8Mb VooDoo2 & i wont to bench it in SLI...
    Oldschool is cool
    Last edited by xooler; 11-14-2005 at 07:52 AM.
    TopMods.NET - Saint-Petersburg, Russia

  2. #2
    Dothan FTW! MeltedDuron's Avatar
    Join Date
    Jun 2004
    Location
    London, England
    Posts
    891
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Pm Fugger
    .:Melted's Hardware:.

    .:Hackintosh/Rig/Fileserver:.
    .:Intel Xeon 3120:3.6GHz(400*9):2x2GB OCZ Reaper 1066:Zotac 9800GTX:Gigabyte GA-G33M-DS2R:500w Enermax Eco80+:.
    .:Samsung Storage:.
    .:2x1TB F3 RAID0:2x750GB F1 RAID0:1TB F1:500GB T166:.
    .:Cheap MATX Case:Snow Leopard 10.6.5:.

    .:15" Powerbook G4:.
    .:1.25GHz:1GB:80GB:Leopard 10.5.8:.

    I've been using Intel ever since AMD put an end to my socket A fun. I was almost going to go back when I saw the cheap AM2 chips, but they suck Viva La Chipzilla!

  3. #3
    Xtreme Russian xooler's Avatar
    Join Date
    Nov 2004
    Location
    Russia,Saint-Petersburg
    Posts
    250
    Thanks
    0
    Thanked 0 Times in 0 Posts
    That baby can get 1578 in 2k1

    This babys should be good in SLI
    TopMods.NET - Saint-Petersburg, Russia

  4. #4
    Xtreme Addict
    Join Date
    Apr 2004
    Location
    Cornwall/Leeds UK
    Posts
    1,026
    Thanks
    0
    Thanked 0 Times in 0 Posts
    You need a matched pair of cards to run SLI ie both have to have 12 or 8mb

    How can ypu run 3dmark on these cards? Hacked drivers?
    Last edited by Highland3r; 11-06-2005 at 03:35 AM.
    .:. X2 @ 2.9 .:. E6600 L628 @ 4.73 .:. AB9 @ 512 FSB .:. E6300 @ 100% OC Stable

    U.K. overclockers: Represent your country, bench for EP-UK! Unite and show the world there IS a U.K. scene!



  5. #5
    Xtreme Member KILLorBE's Avatar
    Join Date
    Apr 2005
    Location
    Netherlands
    Posts
    204
    Thanks
    0
    Thanked 0 Times in 0 Posts
    @ xooler: Have a look at FalconFly
    Just in case I attached a file from the 3/98 Diamond SuperCD which should work for the Voodoo II (Unzip, rightclick --> Install).
    NOTE: Scan the file!! I'm pretty sure it's virus free but it won't be the first time PC's get infected by attachments.

    @ Highland3r: From the FM FAQ:
    3DMark2001 SE: Mid-range to low end DX8 hardware, all DX7 hardware, (and any older hardware you manage to run on it
    I haven't been able to run 3DMark2k1 using this system:
    Venice 3000+ @ 300x9
    DFI nF3 Ultra-D
    2x512MB OCZ Value
    2x Diamond Monster 3D II 12MB
    I'm pretty sure it's my MOBO as it won't recognize the Voodoo cards, hell I can't even boot using any PCI card (Tried 2 different S3 cards and a Banshee orso).

    I might try to run some benches with the system in my sig or with my "old gaming" system (Asus P5A, 128MB Mushkin PC150 (What do you mean overkill? ), AMD K6-III 400Mhz, SB AWE64 Gold).
    Attached Files
    DFI nF3 Ultra-D - 3000+ Venice @ 300x9 - 2x512MB OCZ Value - Asus 6800 @ 16x1,6 - 80GB Hitachi 7K80 - PVR 150MCE - Tagan TG480-U22 2Force
    Abit ST6 - Tualeron 1.2 @ 1.6 or 1.0A @ 1693 (168FSB) - 2x 256MB MDT PC150 - Sparkle 235W - 80GB Maxtor - V8420S @ 335/705+ - 2K1 = 11485 - 2K3 = 1610
    Asus P5A - K6-III 400 - 128MB Mushkin PC150 Rev.3+ - Asus V3800 Ultra Deluxe or Asus V7100 - 2x 12MB Voodoo II - 40GB Hitachi - Q-Tec 550W


    I'm NOT watching pr0n, I'm studying anatomy

  6. #6
    Xtreme Russian xooler's Avatar
    Join Date
    Nov 2004
    Location
    Russia,Saint-Petersburg
    Posts
    250
    Thanks
    0
    Thanked 0 Times in 0 Posts
    2 Highland3r,
    I use drivers for 98SE from 3dfxzone.net
    2 KILLorBE,
    Thx,I'll try that drivers today
    TopMods.NET - Saint-Petersburg, Russia

  7. #7
    Xtreme Addict Kasparz's Avatar
    Join Date
    May 2005
    Location
    [EU] Latvia, Jelgava
    Posts
    1,739
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I got Voodoo1.
    P.S Sorry Kunaak My bad
    Last edited by Kasparz; 11-07-2005 at 01:34 AM.

  8. #8
    Registered User
    Join Date
    Mar 2005
    Location
    canada
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    hmmm... i got 2x12mb voodoo2's sitting up stairs...maybe i should get some benchin in too. i them, runnin with my ati rage pro turbo 2mb be4... was tryin the doom3 mod

    hmm... i have official drivers too, but i dunno if those r the ones u want for 3dmark.... pm me with ur email addy if u want em.
    Last edited by arcane613; 11-06-2005 at 08:46 AM.

  9. #9
    Xtreme Member Magnj's Avatar
    Join Date
    Jan 2005
    Location
    NJ
    Posts
    2,432
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thats funny, I was jst thinking about pickin up some old crappy cards on Ebay

    CPU Z:2700 2k1:27952 2k3:12282 2k5:5763 PCM05 AQ3
    Opteron 165 s939_____OCZ RAM/PSU_____BBATI X800xl

  10. #10
    Xtreme Guru craig588's Avatar
    Join Date
    May 2004
    Location
    the cold place Temp: 5C
    Posts
    3,764
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I use these for playing dos games, I never even concieved of running them in windows.
    For those of you about to post:

  11. #11
    Xtreme Member KILLorBE's Avatar
    Join Date
    Apr 2005
    Location
    Netherlands
    Posts
    204
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by craig588
    I use these for playing dos games, I never even concieved of running them in windows.
    While I comprehend English pretty well (If I may say so myself) I'm not sure what you mean.
    1) You never bothered to run them in windows.
    2) You didn't understand how to run them in windows.
    3) It never came to your mind to run them in windows.
    DFI nF3 Ultra-D - 3000+ Venice @ 300x9 - 2x512MB OCZ Value - Asus 6800 @ 16x1,6 - 80GB Hitachi 7K80 - PVR 150MCE - Tagan TG480-U22 2Force
    Abit ST6 - Tualeron 1.2 @ 1.6 or 1.0A @ 1693 (168FSB) - 2x 256MB MDT PC150 - Sparkle 235W - 80GB Maxtor - V8420S @ 335/705+ - 2K1 = 11485 - 2K3 = 1610
    Asus P5A - K6-III 400 - 128MB Mushkin PC150 Rev.3+ - Asus V3800 Ultra Deluxe or Asus V7100 - 2x 12MB Voodoo II - 40GB Hitachi - Q-Tec 550W


    I'm NOT watching pr0n, I'm studying anatomy

  12. #12
    Xtreme Guru craig588's Avatar
    Join Date
    May 2004
    Location
    the cold place Temp: 5C
    Posts
    3,764
    Thanks
    0
    Thanked 0 Times in 0 Posts
    3: I never thought of running them in windows. I imagined they would be far too slow.
    For those of you about to post:

  13. #13
    Xtreme Mentor
    Join Date
    Jul 2004
    Location
    Ontario
    Posts
    2,808
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Man, I remember paying a fortune for my Voodoo 2 8M off a buddy just so i could play FF7 when it came out back in 97.
    Silverstone Temjin TJ-09BW w/ Silverstone DA750
    Asus P8P67
    2600K w/ Thermalright Venomous X Black w/ Sanyo Denki San Ace 109R1212H1011
    8GB G.Skill DDR-1600 7-8-7-24
    Gigabyte GTX 460 1G
    Modded Creative X-Fi Fatal1ty w/ Klipsch Promedia 2.1
    1 X 120GB OCZ Vertex
    1 X 300GB WD Velociraptor HLFS
    1 X Hitachi 7K1000 1TB
    Pioneer DVR-216L DVD-RW
    Windows 7 Ultimate 64


    Quote Originally Posted by alexio View Post
    From the hip and aim at the kitchen if she doesn't approve your purchases. She'll know better next time.

  14. #14
    Xtreme Member
    Join Date
    Apr 2005
    Posts
    148
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I got a voodoo 3 and overclocked it. Unfortunately i don't have a CPU worthy of benching this thing properly. DUron 750Mhz only gets 1100 points or something.

  15. #15
    Xtreme Member Gnome's Avatar
    Join Date
    Jul 2005
    Location
    Amherst, MA
    Posts
    187
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i have a creativelabs voodoo2 SLI 12mb for anyone who wants it and willing to pay for shipping

  16. #16
    Xtreme Addict Kasparz's Avatar
    Join Date
    May 2005
    Location
    [EU] Latvia, Jelgava
    Posts
    1,739
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Eem i remember with Voodoo1 Ati rage 2MB@Voodoo1 and P200@250Mhz i got ~1500 99marks

  17. #17
    Ker-Pow ! [XC]thewildblue's Avatar
    Join Date
    Jun 2002
    Location
    UK
    Posts
    2,630
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have a voodoo 5 sat somewhere in a box and I also had an ati 3dmaxx card. Both performed much the same, but the maxx wouldnt work in 2000 which was a shame.

  18. #18
    Xtreme 3DTeam Member funkflix's Avatar
    Join Date
    Aug 2003
    Location
    Germany
    Posts
    1,909
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Beat this!



    It's 2 x 12MB Voodoo 2 on SLI. Sometimes i love to bench with old hardware, it is really funny.
    PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
    Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
    Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.


  19. #19
    I am Xtreme NickS's Avatar
    Join Date
    Apr 2005
    Location
    Upstate, NY
    Posts
    5,612
    Thanks
    0
    Thanked 0 Times in 0 Posts
    lol what cpu?
    Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
    MSI H55-GD65 Motherboard
    G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
    Sapphire Radeon 5750 1GB
    Samsung F4 320GB - WD Green 1TB
    Xigmatek Utgard Case - Corsair VX550

  20. #20
    Xtreme Addict gkiing's Avatar
    Join Date
    Jun 2003
    Posts
    2,287
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by GravediggA
    Beat this!



    It's 2 x 12MB Voodoo 2 on SLI. Sometimes i love to bench with old hardware, it is really funny.
    I've gotten around 2k with a voodoo3 2000 pci and a similar setup (2300mhz socketA)

  21. #21
    c[_] STEvil's Avatar
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    20,203
    Thanks
    20
    Thanked 83 Times in 49 Posts
    almost tempted to break out my quantum obsidian x24... but dont really have anything to bench it on...
    Heatware || 01.01.08; AND 111.2%

    Dead Z7S-WS? Click!. || XS Z7S-WS Thread || Current Dead Asus Z7S-WS count: 26+ ($15,000 in dead motherboards).
    All along the watchtower the watchmen watch the eternal return.
    Want to use my Anti-asus logo? Go ahead, but use this link please!: http://i853.photobucket.com/albums/a...sus/noasus.gif
    Bring back the game. http://reclaimyourgame.com/. EA are mean.

  22. #22
    Xtreme Russian xooler's Avatar
    Join Date
    Nov 2004
    Location
    Russia,Saint-Petersburg
    Posts
    250
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Thumbs up

    I have WR on single Voodoo2.

    Last edited by xooler; 11-12-2005 at 01:37 AM.
    TopMods.NET - Saint-Petersburg, Russia

  23. #23
    Xtreme Russian xooler's Avatar
    Join Date
    Nov 2004
    Location
    Russia,Saint-Petersburg
    Posts
    250
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I think that baby can get more under DIY & with Vmods....
    TopMods.NET - Saint-Petersburg, Russia

  24. #24
    Registered User White's Avatar
    Join Date
    May 2005
    Posts
    20
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Nice result! I wanna buy second GF6800Ultra for SLI mode, then i'll install 2xVoodoo 2 SLI in my system.... So... results will be nice :-)

  25. #25
    Xtreme Enthusiast Turrican's Avatar
    Join Date
    Oct 2005
    Location
    Austria
    Posts
    865
    Thanks
    0
    Thanked 0 Times in 0 Posts
    With my old gaming Rig (K6-III 450 , 320MB PC100 2-2-2-5, 2x Voodoo 2 12MB, Epox MVP3G5 (2mb Onboard Cache ) i got ~ 500 3dmarks (iirc) in 01 and ~3500 in 3dmark99 (tested last week )

    cu

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts