32m Low Clock Challenge

[s7e9h3n]

You can do faster than that with 0512...nice one

Hehehe...I know - that's just my first 32m run with the cpu. Just sit tight for a bit - you haven't seen anything yet

@ Rammie - that's a sweet run you've got there. By chance have you tried cl2 @ that speed. I gave 13x269 a go but my memory was a little flakey for some reason. That'll all be solved when I get a very special DFI SLI-DR Expert board here by Friday........

[s7e9h3n]

here is mine

LOL...@ first glance, I saw the cpu speed and the 32m result only and my jaw hit the floor. THen I noticed it was a dothan and am feeling much better now.

[RoyaL]

s7e9h3n i feel you

i only wanted to show u guys what means to be fast

[s7e9h3n]

s7e9h3n i feel you

i only wanted to show u guys what means to be fast

LOL

[RAMMIE]

......

@ Rammie - that's a sweet run you've got there. By chance have you tried cl2 @ that speed. I gave 13x269 a go but my memory was a little flakey for some reason. That'll all be solved when I get a very special DFI SLI-DR Expert board here by Friday........

These RAMs won't do cl2 over 270 on the Ultra-D.They will do under 20 at 270x13.

[s7e9h3n]

These RAMs won't do cl2 over 270 on the Ultra-D.They will do under 20 at 270x13.

So basically you ran cl1.5 to run 274? Maybe I need to try that to get them to run up to speed. BTW - is the cooling a stock vapols?

[RAMMIE]

So basically you ran cl1.5 to run 274? Maybe I need to try that to get them to run up to speed. BTW - is the cooling a stock vapols?

yes and yes

[s7e9h3n]

yes and yes

thx and thx.....

[Zeus]

These RAMs won't do cl2 over 270 on the Ultra-D.They will do under 20 at 270x13.

Under 20 with 13x270 while you get 20m33 with 13x274?

Nice run btw.

[RAMMIE]

Under 20 with 13x270 while you get 20m33 with 13x274?

Nice run btw.

Sorry,under 21

[coop]

Nice to see the interest and post. The 21's and 20's are to fast for me.(work in progress for a 21) Hope you got your board Stephen. What's with the clock speeds with Pentiums? Is it like human years and dog years?

[s7e9h3n]

Nice to see the interest and post. The 21's and 20's are to fast for me.(work in progress for a 21) Hope you got your board Stephen. What's with the clock speeds with Pentiums? Is it like human years and dog years?

Just got it today. Gotta prep the insulation so may take a day or so before the conformal coating fully dries LOL - yup the Dothans kick some serious ass in Spi, but have yet to see any run SLI or Crossfire

[M.Beier]

I've done some testing, found my new 24/7 setting...
http://www.peecee.dk/index.php?id=20524&noresize=yes
23:52 at 3100mhz, can do ALOT better, 30mhz left in mem for 32M, but... Just tested settings for now

[coop]

Switched cpus and have this for comparison with an earlier post here. http://www.xtremesystems.org/forums/...97#post1113397 (I hope it continues at this decent rate). It took 1.77v before and this one only 1.45v (S-Guardian). 146 Opti 0540FPMW [IMG][/IMG]

[Zeus]

So you mean the opty's are a little faster than the San Diego clock for clock?

[coop]

So you mean the opty's are a little faster than the San Diego clock for clock?

No, not that I can tell. But the volts required for me to get 3Ghz 32m is alot less with the Opti. The two runs aren't exactly the same, only cpu speed, timings are close. I just installed it last night and was seeing how it was. I hope I'm able to get into the 21's and a 24 sec 1m with it though.

[coop]

A Thanksgiving Greetings to all. [IMG][/IMG]

[coop]

So you mean the opty's are a little faster than the San Diego clock for clock?

I'm changing my previous answer to "yes". The difference between the two different cpu that I have anyway is considerable. I'm going to get a list set up for the "Time Zones" and put it in the first post for ease of reference. I will try to do today.

[coop]

The 'Sub 23.xx' catagory is going to be tough to beat with a 2972 in first. bachus, you have a 2980, [IMG][/IMG]

[Onepagebook]

Here I am, now you have 21.xxx



20.xxx

[Zeus]

260MHz @ only 3.32V? What RAM is that OPB?

[Onepagebook]

ok, that's don't run that high cpu frequency.
let's all run 3.3g range
catch me if you can steve,

in the middle of running(from Digital camera), take a look@ MAL and RP



finished: 21m50.093s




Zeus, that just a normal pair of bh-5 UTT, the problem is I never over-volt on my Vdimm

[bachus_anonym]

Come on Kevin, you can do better than that Close that MBM and don't bother with DC shots... You're loosing quite a few seconds because of that Show us some 21:5x @ below 3300MHz, will ya?

300x11=3300MHz DDR600 6-3-3-2.5-1T - 21:58.516 - 2x512MB TCCD

edit: I think 3280MHz can be done with some good BH-5/UTT or tight TCCD, so you should be able to do that

ok, that's don't run that high cpu frequency.
let's all run 3.3g range
catch me if you can steve,

in the middle of running(from Digital camera), take a look@ MAL and RP

http://img202.imageshack.us/img202/7...pi32mdc1ru.jpg

finished: 21m50.093s

http://img202.imageshack.us/img202/3856/33gpi32m7aq.jpg

[Onepagebook]

too late, can I do 3296mha in 21m46s?
** Steve, did you see the last couple iterations?
The change I made compare with previous one,
TRFC to 11, TRTW as 1, RP as 2.5ns

[M.Beier]

Nice OPB, nice, TRTW 1 vs 2 - big difference??

Read preamble... Hmm, it doesnt seem to give any notisable performance on my rig, btw.... May you rot in hell :P - ARGH FX57, gimmi