DDR2 fat body D9 list

**IluvIntel** · 12-07-2005, 12:34 AM

Originally Posted by FUGGER

Stuck

Thankyou

**SynGroW** · 12-08-2005, 06:46 AM

I found some Corsair ValueRAM with Micron chips

VS256MB533D2
lot# 0436056-0

Chips say:

4KB41
D9CHM

According to the Micron identifier the chips are MT47H32M8BP-37E
Specifications
Density: 256Mb
Width: x8
Configuration: 32 Meg x 8
Voltage: 1.8V
Package: FBGA
Package Type: Lead Free
Pin Count: 60-ball
Clock Rate: 267 MHz
Cycle Time: 3.75ns
Operating Temp: 0C to +85C
CAS Latency: 4
Data Rate: DDR2-533
Part Status: Production

Ofcourse it has the fat body looks, I'll upload a pic when I get home.

It's just 2x256MB, but for only $30 I couldn't resist to buy them

Anyone knows if this mem will clock ok?

**TiTON** · 12-12-2005, 09:20 AM

Hey folks.. need a little help. I want to get some 2x512MB FatBody DDR2.. and wanted to know which is the cheapest set I can get? I plan to get several pairs of memories. So I will be able to cherry pick the best.

My goal is 1000+ Mhz.. I know my chances are better with the higher end memory. But it is always fun to search for highly overclockable memory

SAD

**dingnecros** · 12-12-2005, 09:37 PM

Just letting everyone know that I just got my Mushkin eXtreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM Dual Channel kit System Memory Model #: 991382

and it is NOT fatbody d9 it had a heatspreader on it popped it off and mushkin had sanded off the chip markings and stamped mushkin on it with some cheap ink. Wondering if I should put the heatspreader back on or not??

**V I P E R** · 12-13-2005, 12:16 AM

Originally Posted by SynGroW

I found some Corsair ValueRAM with Micron chips

VS256MB533D2
lot# 0436056-0

Chips say:

4KB41
D9CHM

According to the Micron identifier the chips are MT47H32M8BP-37E
Specifications
Density: 256Mb
Width: x8
Configuration: 32 Meg x 8
Voltage: 1.8V
Package: FBGA
Package Type: Lead Free
Pin Count: 60-ball
Clock Rate: 267 MHz
Cycle Time: 3.75ns
Operating Temp: 0C to +85C
CAS Latency: 4
Data Rate: DDR2-533
Part Status: Production

Ofcourse it has the fat body looks, I'll upload a pic when I get home.

It's just 2x256MB, but for only $30 I couldn't resist to buy them

Anyone knows if this mem will clock ok?

Where I can buy some of these, and do they have 512MB or 1024MB modules?

**DaWaN** · 12-13-2005, 07:19 AM

Originally Posted by V I P E R

Where I can buy some of these, and do they have 512MB or 1024MB modules?

Those where second hand and quite old

I found them and Sygrow couldn't resist to buy them

**V I P E R** · 12-13-2005, 11:59 PM

Originally Posted by DaWaN

Those where second hand and quite old

I found them and Sygrow couldn't resist to buy them

For 30$ no one will resist

.

**TiTON** · 12-14-2005, 09:04 AM

Originally Posted by dingnecros

Just letting everyone know that I just got my Mushkin eXtreme Performance 2GB (2 x 1GB) 240-Pin DDR2 SDRAM Dual Channel kit System Memory Model #: 991382

and it is NOT fatbody d9 it had a heatspreader on it popped it off and mushkin had sanded off the chip markings and stamped mushkin on it with some cheap ink. Wondering if I should put the heatspreader back on or not??

Thanks for the info. I was about to order them too :P For $155 for 2x1GB Fat Body sounded too good to be true, well.. atleast last that long :P

I'm looking for some affordable Fat Body to play around with.. and they all seem pretty pricey.

SAD

**IluvIntel** · 12-14-2005, 11:41 PM

Finally got my Corsair XMS2 8000UL sticks today, and I notice that the heatspreader seems to be made of some kind of plastic type substance. Different from the metal HS on 5400UL's. These 8000's are v1.1 and my 5400's are v1.2.

Does anyone else who has these 8000UL's v1.1 have the same type of heat spreader?

Cheers.

**paakkis** · 12-25-2005, 03:56 PM

Yes i have those 8000UL v1.1 stick`s and heatspreaders are like you said some kind of plastic.These babys goes pretty well 2.45v Screenshot.

**Raiden Zero** · 12-25-2005, 06:09 PM

Originally Posted by SynGroW

I found some Corsair ValueRAM with Micron chips

VS256MB533D2
lot# 0436056-0

Chips say:

4KB41
D9CHM

According to the Micron identifier the chips are MT47H32M8BP-37E
Specifications
Density: 256Mb
Width: x8
Configuration: 32 Meg x 8
Voltage: 1.8V
Package: FBGA
Package Type: Lead Free
Pin Count: 60-ball
Clock Rate: 267 MHz
Cycle Time: 3.75ns
Operating Temp: 0C to +85C
CAS Latency: 4
Data Rate: DDR2-533
Part Status: Production

Ofcourse it has the fat body looks, I'll upload a pic when I get home.

It's just 2x256MB, but for only $30 I couldn't resist to buy them

Anyone knows if this mem will clock ok?

hm, could get some, too.
just wonder if they clock well?

can u give us some results?

**eiceman** · 12-25-2005, 06:17 PM

Originally Posted by paakkis

Yes i have those 8000UL v1.1 stick`s and heatspreaders are like you said some kind of plastic.These babys goes pretty well 2.45v Screenshot.

WOW,

amazing

**IluvIntel** · 12-26-2005, 07:04 PM

Originally Posted by paakkis

Yes i have those 8000UL v1.1 stick`s and heatspreaders are like you said some kind of plastic.These babys goes pretty well 2.45v Screenshot.

How high can you go with default 2.3v max on P5WD2 ?

**Raiden Zero** · 01-01-2006, 02:23 PM

2 days ago my crucial ddr533 arrived (non ballistix)...
thats whats written on the chips:

4JB11
D9BQM

the other one is:
4GB11
D9BQM

But i dont know if these are fatboy d9 or non-fatboy d9.

they look exactly like these:
klick

the maximum oc they could do with 2.0v was around 391mhz 4-4-3-8 ... but maybe they can do even more.

somebody knows more about those chips?
cant test them because im on holiday for the next 6 days.

even if those are not that good its a good buy for 65€

(second hand)

**-ZEUS-** · 01-01-2006, 02:47 PM

Raiden Zero
No, those are non-fatbody D9

paakkis
Did you pull off the heatspreaders and use some kind of cooling to get these result?

**Raiden Zero** · 01-01-2006, 02:56 PM

Originally Posted by -ZEUS-

Raiden Zero
No, those are non-fatbody D9

paakkis
Did you pull off the heatspreaders and use some kind of cooling to get these result?

ur sure?
just wondering because compared to the 2 pics they look more like fatboy d9 than like non-fatboy.
but they are a bit smaler o.O...

**^don.k's^** · 01-05-2006, 05:41 AM

What do you say about these sticks ?

2x1gb kingston value ram, the cost me 140€ both...

**eiceman** · 01-05-2006, 06:00 AM

Originally Posted by ^don.k's^

What do you say about these sticks ?

2x1gb kingston value ram, the cost me 140€ both...

It's not fat D9?

**^don.k's^** · 01-05-2006, 06:50 AM

Are you asking or what ? I was wondering if they were fat D9....

**paakkis** · 01-05-2006, 07:22 AM

-ZEUS- Nope , and they were cooled by 120mm Y.S. Tech

**^don.k's^** · 01-05-2006, 08:07 AM

S**t, now i think mines aren't fat body, i've seen pics of corsair 5400UL and they seem to have 92 balls, mines are 60... BTW where can i know how my ram is ? Any DDR2 ram list ?

**Unseen** · 01-05-2006, 10:10 AM

Originally Posted by ^don.k's^

S**t, now i think mines aren't fat body, i've seen pics of corsair 5400UL and they seem to have 92 balls, mines are 60... BTW where can i know how my ram is ? Any DDR2 ram list ?

i think they r not fat body

I have the same as yours.
At 2,43vdimm on asus p5wd2 i got this

**^don.k's^** · 01-05-2006, 10:50 AM

Not bad for the price tho...

I'm waiting for the p5wd2-e, when y get it i'll see how far they go...

**eiceman** · 01-05-2006, 06:12 PM

Sorry，It's NOT……But the price seems wonderful

**leejsmith** · 01-19-2006, 04:14 AM

does any one have any experiance with

Patriot 1GB (2 x 512MB) 240-Pin DDR2 SDRAM Model #: PDC21G5600+XBLK

it's on the fat body list so hope it's good.

i have some ram to return but can only exchange. looking for ddr2 with good overclocking this was within my price range.

Thread: DDR2 fat body D9 list

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions