barton @ 3.4ghz - outdated platform?

[GMX]

usually the A7N8X will max near 220fsb...most NF7s can do 230 no mods

With mods, 250+

The Asus just like the DFI, prefer high vdd. NF7 can vary between 1.6-1.9 for max results.

[Revv23]

You forgot something i have done the 280+ run with 2 diffrent dfi nf2 cards.. and both did it without of any of them got higher than the another one.(I have tryiend 3 the first one did i kill(it did about 279) when i tryied a tec on NB). But the another ones, that was newer did both 280+. But super pi was stil hard to do around -+270. Apic trouble and cpc.

Found some image:

Low fsb but high cpu speed wanted go so high i could in cpu speed.



High fsb but low cpu speed...bad cpu thorton @ L2 512

Thats fair enough. But, lets notforget your CPU is one of the best ever. Perhaps it behaves differently then the two i had?

[OCPerformance]

With mods, i beleive the A7n8x can get up closer to the Abit boards.

yes with mods its possible

[-Acid-]

most An7 boards stop at 224 fsb I went through 5 before i got one that would hit above it.

[Henrik2k]

thought id try a superpi with my xp-m, aswell.....

[OCPerformance]

most An7 boards stop at 224 fsb I went through 5 before i got one that would hit above it.

the NF7 S Rev. are a little bit better
with good mod bios achieve 240+

[ruggero]

Thats fair enough. But, lets notforget your CPU is one of the best ever. Perhaps it behaves differently then the two i had?

The time of Lastviking is very slow

with 260fsb...and nf7-s no mod.

[OCPerformance]

its realy good for a non modded NF7

here is my pic of 260

[-Acid-]

nice run there mate
whats the max fsb you can run ???

[Morgoth]

@ciento:

it's IQYHA 0352MPMW obviously the best stepping for xp-m2600+

don't know bios version now, it's custom, i will have a look for you, but i can't reach speedjumps with different one like e.g. tiktak posts all the time

5400 pcmark04 scores will come, i just need to oc my gpu,
and with a new mobo there will be no problems for larger aims

with fsb255+ i also will dare a a64 competition

How is the IQYHA 0407 VPMW compare? I own one right now, I'm going to try some highFSB when my DDR booster comes in the post.

Masterchorch, any opinions on BIOS's besides the Mantarays? also, a 1t BIOS like the PR3ACH3R I use should be fine with BH5 right?

I found that when using the mantarays, too often I'd try to get into the BIOS and I'd end up with a black screen with a blue bar along the bottom, I got sick of it.

My time with my IQYHA 0407 VPMW XP-M 2500+ without DDR booster


Anyone know what I should expect from an 0407 VPMW type of IQYHA?

[img]

[Morgoth]

Here's what I found hunting around the net on these:

IQYHA 0407 VPMW
(Air, peaboy) (Volcano 7+)

* 1992 MHz at 1.5 volts

-----

IQYHA 0407 VPMW
(THunDA)

* 2530 MHz at 1.725 volts. Idle 35C
* 2310 MHz at 1.55 volts

-----

IQYHA 0407 VPMW
(FatesWarning)

* 2508 MHz at 1.8 volts

IQYHA 0407 VPMW
(Air, Hughhefnar) (Thermalright SP-97, 92mm Tornado)

2531 MHz @ 1.8 volts
2600 MHz @ 1.9 volts
2725 Mhz, 46.5C load

-----

IQYHA 0407 VPMW
(Water, mata2974)
(Koolance system, Swiftech MCW 5002, Mag5, two heatercores)

2802 MHz at 2.05 volts

-----

IQYHA 0407 VPMW
(Air, thegame) (SP-97, 80mm Vantec Tornado)

2640 MHz

-----

IQYHA 0407 VPMW
(Water, madsam) (DTEK TC-4, Chevvy core, Eheim 1250)

* 2750 MHz at 2.05 volts

-----

IQYHA 0407 VPMW
(Air, Tazman2) (SLK 900A, 92mm Tornado)

2600 Mhz at 1.85 volts

-----

IQYHA 0407 VPMW
(Air, fishtanke) (thermalright SP-97, 92mm Panaflo H1A)

* 2675 MHz at 1.9 volts
* 2714 MHz at 1.95 volts

[GMX]

Here's what I found hunting around the net on these:

IQYHA 0407 VPMW
(Air, peaboy) (Volcano 7+)

* 1992 MHz at 1.5 volts

-----

IQYHA 0407 VPMW
(THunDA)

* 2530 MHz at 1.725 volts. Idle 35C
* 2310 MHz at 1.55 volts

-----

IQYHA 0407 VPMW
(FatesWarning)

* 2508 MHz at 1.8 volts

IQYHA 0407 VPMW
(Air, Hughhefnar) (Thermalright SP-97, 92mm Tornado)

2531 MHz @ 1.8 volts
2600 MHz @ 1.9 volts
2725 Mhz, 46.5C load

-----

IQYHA 0407 VPMW
(Water, mata2974)
(Koolance system, Swiftech MCW 5002, Mag5, two heatercores)

2802 MHz at 2.05 volts

-----

IQYHA 0407 VPMW
(Air, thegame) (SP-97, 80mm Vantec Tornado)

2640 MHz

-----

IQYHA 0407 VPMW
(Water, madsam) (DTEK TC-4, Chevvy core, Eheim 1250)

* 2750 MHz at 2.05 volts

-----

IQYHA 0407 VPMW
(Air, Tazman2) (SLK 900A, 92mm Tornado)

2600 Mhz at 1.85 volts

-----

IQYHA 0407 VPMW
(Air, fishtanke) (thermalright SP-97, 92mm Panaflo H1A)

* 2675 MHz at 1.9 volts
* 2714 MHz at 1.95 volts

The 0407 VPMW doesnt seem that good. Some results are below average, some are average. If you can get 2600 1.8-1.82v stable, then you have a good cpu. If you need 1.85v, it's average. 1.9v for 2600 is kind of bad for a mobile.

[OCPerformance]

nice run there mate
whats the max fsb you can run ???

max FSB265 with old PSU and with my new on (Enermax liberty 620W) not testet

[ruggero]

its realy good for a non modded NF7

here is my pic of 260

Wow...very nice score...1gb@260mhz...

My biggest fsb is 274mhz with a nf7-s no mod...

[OCPerformance]

MY best RAM Corsair Twinx 1024 3500C2 achieve on NF4 275 @ 2.2.2.2.11 @ 3,6V

I have to do same mods for higher FSB

[blander]

Wow...very nice score...1gb@260mhz...

My biggest fsb is 274mhz with a nf7-s no mod...

very nice result for a nf7-s
was it dual channel and what bios are you using, alpha timings?

[masterchorch]

finaly my third lanparty arrived - and it brought what i was searching for...

FSB 270 // 2-2-2-11 1T

ln2 is ordert, lets see what's gonna happen then...

[-Acid-]

finaly my third lanparty arrived - and it brought what i was searching for...

FSB 270 // 2-2-2-11 1T

ln2 is ordert, lets see what's gonna happen then...

bloody hell thats nice mate

i cannot get hold of ln2 here yet

good to see the xp wars continue

[OCPerformance]

finaly my third lanparty arrived - and it brought what i was searching for...

FSB 270 // 2-2-2-11 1T

ln2 is ordert, lets see what's gonna happen then...

FSb like hell very nice

[blowsion]

nice clocks

still got an 2600 xp-m here and just bought me an nf7-s on ebay
i will slap some phase change on it as soon as its arrives

lets keep socket A alive

[OCPerformance]

All with watercooling

IDYHA
2800 MHz @ 2,05 ->0352 RPMW

IQYHA
2815 MHz @ 2,05 ->0352 RPMW

2815 Mhz @ 2,05V ->0401 XPMW
2850 MHz @ 2,05V ->0401 XPMW
2900 MHz @ 2,05V ->0401 XPMW
2900 Mhz @ 2,05V ->0401 XPMW

[ultranick]

God 2.2v ，，，，，，crazy~！

[Raybo]

I replaced my beloved XP(M) with my current rig and there is no contest. (A64 kills it) But...........

2600+mhz and 243fsb for an idiot like me ain't bad, (AN-7, 2600XP-M and and 2X256 Twinmos BH-5 on an unmodded board) I still love it!

[Gothic]

I know i can flash my DFI Lanpart Rev.A with the Rev.B Bios, losing both RAID and S-ATA functions (correct me if I'm wrong), but will also those Rev.B modded BIOSes work on my Rev.A? My max un-modded FSB is 266MHz, but my ty Corsair VS is holding me back, and nf2 definitely HATES mem divider...

And also I definitely need badly a Shim, because the weight of the cooler already started cracking a corner of the die >(

Only BH-5/6 and UTT will get good results on nf2??

[OCPerformance]

old BH-5 und BH-6 are better than UTT