The Official X2 Overclocking Thread (Please Post Your OC's)

[njkid32]

Edit: I will be checking this thread to keep it clean, please follow the post layout concept guys, we really want to have something that is easy to sift through UnG


Ok, here is thread for new and old X2'ers. We need an oc list with top X2 oc's and average oc's with stepping and all. Please post SS's of CPU-Z, & Validation link, A64 Tweaker, 2x Super PI times, and whatever you use 2x Prime95, 2x SP2004 or 2x OCCT. Also use the template to post your settings. I will keep an updated list of steppings and top 5 X2 oc's. There will be a category for Air, Water and Phase Change cooling for each chip... Good Luck Everyone!!!!

Links to programs--

Guide To Setup Dual Prime95
Super Pi Mod
A64 Tweaker & CPU-Z V1.30

Information Threads--
3800 X2 Thread

Rules:

1-Please post at least a ss of 2x Super Pi 32m SS to show some type of stability.
2-Please post all your settings including your stepping.
3-Please save the Q & A's for other threads like This One just post oc's here



Those who posted and aren't on the list, clean up your post and I'll get you added.

[Major]

-----------------------X2 4400+ water cooled --------------------------------

X2 4400+ CCBWE 0524 RPMW

286x10 2860mhz

System---DFI NF4 SLI DR - See Sig

Water cooled with Exos2 and GPU300v10 block
IHS Removed

OS---Windows XP SP2

704-2BT

VID=1.55v
VID SPECIAL=113%
CHIPSET=1.2v
LDT=1.5v
LDT=4x

CPC =Enabled 1T
CAS Latency(CL) =3
RAS to CAS(Trcd) =3
Min RAS# Active time(Tras) =7
Row Precharge Time(Trp) =3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) =14
Row to Row Delay(Trrd) =2
Write Recovery Time(Twr) =2
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =3
Refresh Period (Tref) =2560
Write CAS Latency(Twcl) =1
DRAM Bank Interleave = Enabled
Skew =Auto
Skew Value =0
DRAM Drive Strength =Auto
DRAM Data Drive Strength =Auto
DDRAM Response Time=Normal
Max Async Latency =Auto
Read Preamble Time =Auto
Idle Cycle Limit =16
Dynamic Counter =Disabled
R/W Queue Bypass =8x
Bypass Max =4x
32 byte Granularity = Disabled

http://valid.x86-secret.com/show_oc?id=37391


------------------------ X2 4600+ Vapochill LS --------------------------------
CDBHE 0527UPAW

11x289mhz 3180mhz


System--- See sig

DFI NF4 Ultra D
X2 4600+
2x1gig Crucial Ballistix
2x 7800gtx SLI
Vapochill LS
IHS Removed



OS--- Windows XP SP2

704-2BT

VID=1.50
VID SPECIAL=113%
CHIPSET=1.6
LDT=1.3
LDT=4x

CPC = Enabled
CAS Latency(CL) = 3
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 8
Row Refresh Cycle Time(Trfc) = Auto
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 2560
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = Auto
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
DDRAM Response Time= Normal
Max Async Latency = Auto
Read Preamble Time = Auto
Idle Cycle Limit = 16clks
Dynamic Counter = Disabled
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disabled

http://valid.x86-secret.com/show_oc?id=38249

[don_vercetti]

Water
2.65ghz (10x265)
CDBHE 0527 TPMW

System---
See Sig
OS---
Windows XP Pro SP2
VID= 1.55v
VID SPECIAL= 113%
CHIPSET= 1.47c
LDT= 1.16v

CPC = On
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 6
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 9
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 200mhz 15.6us
Write CAS Latency(Twcl) = 2
DRAM Bank Interleave = ON
Skew = auto
Skew Value = 0
DRAM Drive Strength = auto
DRAM Data Drive Strength = auto
DDRAM Response Time= normal
Max Async Latency = auto
Read Preamble Time = auto
Idle Cycle Limit = 16
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disabled

Two things

(1) Major, i don't see any stepping. If i'm being blind, tell me and point out where it is.

(2) JUST RESULTS no discussion. if you wanna say anything, PM should be your friend.

[njkid32]

System
3800+ X2 CHBHE 0526UPBW cooled W/Mach1
DFI NF4 Ultra D 704-2BTA bios
Evga 6600GT PCI-E
2x 512 Patriot 4800 XBLK
2x 37gig Raptors
485w Enermax PSU

Win XP Pro SP2

VID= 1.425v
VID SPECIAL= 113%
CHIPSET= 1.7V
LDT= 1.4V
LDT= 3X

CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 0128 =200 1.95us
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
DDRAM Response Time= Normal
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 256
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)

http://valid.x86-secret.com/show_oc?id=37538

Just a quick prime test I will post a longer test

[Perc]

umm not like this one i dont believe. this thread is for over clocks and bios settings not talking about your x2 chip....

X2 3800+ CDBHE 0527UPBW

290x10 2900mhz is my every day 24-7 prime stable setting

System---DFI NF4 Ultra - D

Phasechange cooled
IHS NOT Removed

OS---Windows XP SP2

704-2BT

VID=1.55v
VID SPECIAL=Auto
CHIPSET=1.2v
LDT=1.2v
LDT=Auto

CPC =Enabled 1T
CAS Latency(CL) =2.5
RAS to CAS(Trcd) =3
Min RAS# Active time(Tras) =7
Row Precharge Time(Trp) =3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) =18
Row to Row Delay(Trrd) =2
Write Recovery Time(Twr) =2
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =3
Refresh Period (Tref) =3120
Write CAS Latency(Twcl) =1
DRAM Bank Interleave = Enabled
Skew =Auto
Skew Value =0
DRAM Drive Strength =Auto
DRAM Data Drive Strength =Auto
DDRAM Response Time=Normal
Max Async Latency =9ns
Read Preamble Time =6.5 ns
Idle Cycle Limit =256 clks
Dynamic Counter =Disabled
R/W Queue Bypass =16x
Bypass Max =7x
32 byte Granularity = Disabled

well i hope this helps some....

peace perc,

[iboomalot]

2 4400+ CCBWE 0528 BPMW

254.3 x 11 = 2797mhz

System---DFI UT NF4 Ultra-D - See Sig

Water cooled with Storm block - See Sig
IHS still stock

OS---Windows XP SP2

623-3

VID=1.55v
VID SPECIAL=110%
CHIPSET=1.4v
LDT=1.6v
LDT=3x

CPC =Enabled 1T
CAS Latency(CL) =3
RAS to CAS(Trcd) =3
Min RAS# Active time(Tras) =8
Row Precharge Time(Trp) =3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) =14
Row to Row Delay(Trrd) =2
Write Recovery Time(Twr) =2
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =3
Refresh Period (Tref) =3120
Write CAS Latency(Twcl) =auto
DRAM Bank Interleave = Enabled
Skew =Auto
Skew Value =0
DRAM Drive Strength =Auto
DRAM Data Drive Strength =Auto
Max Async Latency =Auto
Read Preamble Time =Auto
DDRAM Response Time=Normal
Idle Cycle Limit =128
Dynamic Counter =Disabled
R/W Queue Bypass =16x
32 byte Granularity = Disabled
Bypass Max =4x

all tests run with 11 multi to insure high stable clocks since this is a CPU test.

ran a 2x superpi I also decrypted a dvd while doing testing so I would say its pretty stable

[chinkgai]

X2 4400+ CCBWE 0524 RPMW

256x11 2816 mhz (24/7 at below voltage)

263x11 2894 mhz (max i want to push at 1.525x113%)

rest of specs in sig

OS--- winxp sp2

bios---704-2

VID= 1.45
VID SPECIAL= 110%
CHIPSET= 1.5
LDT= 1.2
LDT= 4x

CPC =Enabled 1T
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = auto
DRAM Bank Interleave = Enabled
Skew = Increase
Skew Value = 0
DRAM Drive Strength = Level 1
DRAM Data Drive Strength = Level 1
DDRAM Response Time = Fastest
Max Async Latency = 7.0
Read Preamble Time = 5.0
Idle Cycle Limit = 16
Dynamic Counter = Disabled
R/W Queue Bypass = 8x
Bypass Max = 7x
32 byte Granularity = Disabled

all prime stables for at LEAST 12 hours before i stopped it

screenies:

2.8
http://pg.photos.yahoo.com/ph/chinkg...&.dnm=11b7.jpg

2.9
http://pg.photos.yahoo.com/ph/chinkg...&.dnm=e30c.jpg

[DltdApS]

X2 3800+ CCBWE 0529 RPMW

270x10 2700 mhz (24/7 at below voltage)

rest of specs in sig

OS--- winxp sp2

bios---623-3

VID= 1.55
VID SPECIAL= 104%
CHIPSET= 1.2
LDT= 1.5
LDT= 2.5x

CPC =Enabled 1T
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = auto
DRAM Bank Interleave = Enabled
Skew = Increase
Skew Value = 0
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 3
DDRAM Response Time = Fastest
Max Async Latency = 7.0
Read Preamble Time = 5.0
Idle Cycle Limit = 64
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable 4

all prime stables for at LEAST 5 hours

[msimax]

System---msi neo 2 plat
2x512 4800xblk
powercolorx800modded
x2 3800
bios currently sideeffect 1.a0 tccd
max stable 300x10 testing with tighter timmings 290x10

OS---win xppro

VID=1.7
VID SPECIAL= ?
CHIPSET= ?
LDT= 3
LDT= ?

CPC = 1t at 280 or 2t 300mhz
CAS Latency(CL) = c.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 18
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) =3
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 200 3.9
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = ?
Skew = slower
Skew Value = ?
DRAM Drive Strength = weak
DRAM Data Drive Strength = ?
DDRAM Response Time= ?
Max Async Latency = 8
Read Preamble Time = 5.5
Idle Cycle Limit = 256
Dynamic Counter = enabled
R/W Queue Bypass = 16
Bypass Max = 7
32 byte Granularity = enabled

[IMG][/IMG]

[KaptainBlaZzed]

*Recently Updated to 2854Mhz*

X2 3800+ *Nekked*
DFI NF3 Ultra - D
2 x 512 BH-5
Koolance AL
Enermax 600W SLI

ADA3800DAASCD *Neutered Toledo*
CCBWE 0529RPMW

OS -- Windows XP Pro SP2

BIOS -- 6/27

VID= 1.525
VID SPECIAL= +.3
CHIPSET= 1.65
LDT= ???
LDT= 3x

http://valid.x86-secret.com/show_oc?id=39261

[sirkuz]

System
3800+ X2 CCBWE 0528MPMW Typhoon cooled
DFI NF4 SLI-DR 704-2BTA bios
BFG 7800GTX PCI-E
2x 1GB Ballistix PC4000
74GB Raptor
850w PCP&C

Win XP Pro SP2

VID= 1.5v
VID SPECIAL= 110%
CHIPSET= 1.6V
LDT= 1.2V
LDT= 3X

Mem settings in screen shot along with dual 32MB spi

(sorry if I missed anything...first time I have ever posting any oc'ing info of mine LOL)

Cheers,
Kuz

[xs64]

System
3800+ X2 CHBHE 0531TPAW with Big Typhoon
DFI NF4 SLI-D 704-2BTA bios
Gecube X800XL 256Mb
2x 512 Gskill GH PC3200
2x 256 Mushkin LII PC3500
460w Enermax PSU

@ 270 x 10 Vcore 1.61v
divider 166 , Vdimm 3.2v

VID= 1.450v
VID SPECIAL= 113%
CHIPSET= 1.5V
LDT= 1.2V
LDT= 4X

CPC = Disable
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 12
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3120 =200 15.6us
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = weak4
DRAM Data Drive Strength = 2
DDRAM Response Time= Fast
Max Async Latency = 7ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)

[SET]

4800+ X2 CCBWE 0523VPMW cooled W/T.T Big Typhoon
DFI NF4 Ultra D W/623-3 bios
MSI 6600GT PCI-E
2x 512 OCZ Plat. Rev2
160 x 2 Hitachi SATA II
500W Fortron AX500-A

Win XP Pro SP2

VID= 1.450v
VID SPECIAL= Auto
CHIPSET= 1.6V
LDT= 1.4V
LDT= 3X

CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 6
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 4078
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
DDRAM Response Time= Normal
Max Async Latency = 9ns
Read Preamble Time = 7ns
Idle Cycle Limit = 256
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)



MAX SPi 1M:



Until Soon.

[Perc]

hey njkid get to work and start putting these results in that cart your building i didnt submit my results for nothing ya know? hehehe just pullin your chain man. nice thread lets see some more x24600 action i wanna see how these are running.

peace perc,

[ThorLite]

4400+ X2 CCBWE 0522TPMW cooling Prometeia Mach I R404
291x11=3200MHz
DFI NF4 Ultra D W/704-1 bios
ATi X800XL
2x512MB G.GSkill LC
250GB Hitachi SATA
300GB WD SATA
650W Silverstone

Win XP Pro SP2

VID= 1.5V
VID SPECIAL= 1.13
CHIPSET= 1.5V
VDDR=2.7V
LDT= 1.3V
LDT= 3X

CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 11
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 12
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = Increase
Skew Value = 128
DRAM Drive Strength = 7
DRAM Data Drive Strength = 2
DDRAM Response Time= Normal
Max Async Latency = 9ns
Read Preamble Time = 6ns
Idle Cycle Limit = 256
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x



http://valid.x86-secret.com/show_oc?id=33428

[xxmartin]

Seems my nice 0524 RPMW is missing here.

Got two 4400+ so far:

X2 4400+ Toledo CCBWE 0524 RPMW
2914 MHz @ 1.648V
http://mitglied.lycos.de/xxmartin99/...2914@1.648.png

X2 4400+ Toledo CCBWE 0532 TPMW
2651 MHz @ 1.536V
http://mitglied.lycos.de/xxmartin99/...2651@1.536.png

All on water. Don't have the time to post all the RAM settings but nothing special about them.

[politenessman]

heres my air cooled e6 cd.
--------------------------------------------------------------------------
System---
3800 x2 10x285 xp90/92mm panaflo
ada3800 daa5cd
ccbwe 0529spmw
ultra d sli mod
2x512mb ocz el gold bh5 2-2-8-2 1t 5/6
2x7800gt sli
2xraptor raid 0
2x 300gb maxline 3 raid0
2xhauppage pvr 150
2x benq 1640 (same as plextor)
600w powerstream
coolermaster wavemaster


OS--- xp pro sp2

VID= 1.45
VID SPECIAL= 110%
CHIPSET= 1.6
LDT= 1.4
LDT= 4x

CPC = 1t
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 13
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 3
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 166mhz 3.9us
Write CAS Latency(Twcl) = auto
DRAM Bank Interleave = enabled
Skew = off
Skew Value = 0
DRAM Drive Strength = weak
DRAM Data Drive Strength = level 1
DDRAM Response Time= normal
Max Async Latency = 9ns
Read Preamble Time = 6.5ns
Idle Cycle Limit = 16 clks
Dynamic Counter = enable
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = disable
(above values from a64tweaker 0.50 xt beta and 0.60 beta)

http://valid.x86-secret.com/show_oc?id=40793





i ran the 3dmark05 around the halfway mark of the superpis
bragging alert

that 3dmark is number 1, all cpus 3000mhz and under, all gpus(my mem/core class), all drivers, all os's
http://service.futuremark.com/compare?3dm05=1268404


that about covers it

very truly yours,
politenessman

[Enigma422]

Here are my preliminary OC settings. OC was done with stock cooler. The system is Dual SuperPi Stable, but core2 errored out after 12.5hours P95. I think it needs a little more burn-in time as the system was not stable initially, but after an 8 hour burn-in became atleast 12hr dual Prime stable.

Memory was not OCed this round as to attain max CPU OC, thus the loose or auto settings for memory. I will update once I get my WCing set back up.

System---
AMD Athlon64 X2 4400+
2.7GHz (10.0 x 270MHz)
CCBWE 0532TPMW - Stock Cooling IHS On
See Sig for rest of system

OS---
Windows XP Professional SP2

VID= 1.475
VID SPECIAL= 110%
CHIPSET= 1.60V
LDT= 1.40V


CPC = Disabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = Auto
Row Refresh Cycle Time(Trfc) = Auto
Row to Row Delay(Trrd) = Auto
Write Recovery Time(Twr) = Auto
Write to Read Delay(Twtr) = Auto
Read to Write Delay(Trwt) = Auto
Refresh Period (Tref) = Auto
Write CAS Latency(Twcl) = Auto
DRAM Bank Interleave = Enabled
Skew = Auto
Skew Value = 0
DRAM Drive Strength = Auto
DRAM Data Drive Strength = Auto
DDRAM Response Time= Normal
Max Async Latency = Auto
Read Preamble Time = Auto
Idle Cycle Limit = 16
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disabled





CPU-Z Validation

[IvanAndreevich]

Enigma422
That's a good result with box cooling!

[quent]

Quent
DFI lanparty ultra-D, 702-2
POV 7800GTX
Powerstream 550W
Athlon 64 X2 3800+ 1.7 Bios
0533 TPWM
Aircooling ( Xp90C )
FSB : 275*10 sync. = 2750MHZ
Prime stable

Adata Old bh-5 @ 275Mhz 3.7v
Cas : 2
TRCD : 2
Trp : 2
Tras : 5
CPC : Enable
Other Ram settings : Defaults ( Just for CPU testin' )

Vchipset = 1.7v
LDT = x2.5

[chr]

-----------------------X2 4400+ air cooled --------------------------------

X2 4400+ CCBWE 0524 RPMW

260x10 2600mhz

System---DFI NF4 SLI DR

air cooled with thermalright xp-120, 120mm panaflo

OS---Windows 2005 media center edition

704-2BT

VID=1.325v
VID SPECIAL=110%
CHIPSET=1.2v
LDT=1.5v
LDT=4x

CPC =Enabled 1T
CAS Latency(CL) =3
RAS to CAS(Trcd) =3
Min RAS# Active time(Tras) =7
Row Precharge Time(Trp) =2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) =14
Row to Row Delay(Trrd) =2
Write Recovery Time(Twr) =2
Write to Read Delay(Twtr) =2
Read to Write Delay(Trwt) =3
Refresh Period (Tref) =1552
Write CAS Latency(Twcl) =1
DRAM Bank Interleave = Enabled
Skew =Auto
Skew Value =0
DRAM Drive Strength =Auto
DRAM Data Drive Strength =Auto
DDRAM Response Time=Normal
Max Async Latency =Auto
Read Preamble Time =Auto
Idle Cycle Limit =16
Dynamic Counter =Disabled
R/W Queue Bypass =8x
Bypass Max =4x
32 byte Granularity = Disabled

http://valid.x86-secret.com/show_oc?id=44030

[douirc]

System
3800+ X2 CDBHE 0527UPBW air cooled TT Big Typhoon
DFI NF4 SLI-DR 704-2BTA bios
XFX 7800 GTX OC 490/1300
2x 512 Redline XP4000
1x 74GB Raptor
600w Enermax SLI 2.1 PSU

Win XP Pro SP2

VID= 1.450v
VID SPECIAL= 113%
CHIPSET= 1.7V
LDT= 1.3V
LDT= 3X

[shogan191]

3800x2
CCBWE
0528MPMW
ADA3800DAA5CD
DFI SLI DR
2x7800gtx
4x74 Raptors Raid0
2x512 OCZ 4800
VapoLS

Will boot for suicide screenie at 3.1

Crystal Mark http://crystalmark.info/CrystalMark/...g.php?ID=44443

3D 03 http://service.futuremark.com/compare?2k3=4341131

http://s93545360.onlinehome.us/shogan/X2%20SuperPi.JPG

[Smy]

cpu:x2 4400+ stepping : ccbwe 0528 cpmw air cooled TT Big Typhoon-120mm enermax fan

dfi nf4ultra


corsair xms 4400 tccd 2*512

club3d 7800gtx

running on 2.65*10 for 24/7 max prime95 is 2.6ghz ,but 2.65 run just fin


max bench (for now)

http://home.no/smy/dataromme/sp%201m...%202900mhz.jpg

290*10 1.6vcore

[DAK1640]

-----------------------X2 4400+ air cooled --------------------------------

X2 4400+ CCBWE 0524 RPMW

260x10 2600mhz

System---DFI NF4 SLI DR

air cooled with thermalright xp-120, 120mm panaflo

OS---Windows 2005 media center edition



http://valid.x86-secret.com/show_oc?id=44030

[SIZE=3]Really nice job there chr!!![/SIZE]