MMM
Page 6 of 22 FirstFirst ... 345678916 ... LastLast
Results 126 to 150 of 544

Thread: The Official X2 Overclocking Thread (Please Post Your OC's)

  1. #126
    Xtreme Mentor
    Join Date
    May 2005
    Location
    San Diego, California
    Posts
    3,377
    Quote Originally Posted by Woody-san
    OK, I just found this in a local forum, so please don't ask me how it was "done" (it may be best to query the original poster!) :



    http://www.pinoypc.net/modules/ipboa...0&#entry627521


    Here's the screenie (?):
    http://img127.imageshack.us/img127/6817/img07481hq.jpg


    you decide....

    ;-)

    6.1 Ghz on a dual core is an error, bug, etc. Everyone here should know that
    Intel Rig
    2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
    Custom Water of course

  2. #127
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Nederlands
    Posts
    635
    What cpu's have the E4 and E6 core.

    Got a E6 Opteron 165 now but it hates my ballistix. I heared that all new E6 cores have that problem. So i need a new cpu.

    I can choose the folowing:

    X2 3800+ for 305 $
    X2 4200+ For 370$
    A Opteron 170 for 430 $
    Or a X2 4400+ For 470 $

    If i take the E6 cores there is a chance that i have to swap mamory aswell. What would you guy's do ?
    System Specs: -=Game PC=- | -=Lan Box=-

  3. #128
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Quote Originally Posted by Astennu
    Got a E6 Opteron 165 now but it hates my ballistix. I heared that all new E6 cores have that problem. So i need a new cpu.
    You're going to have to accept that your Ballistix might not like themselves either. Mine aren't as good as they were and that seems to be normal.

    When they fall below spec, hopefully an RMA with bring me replacements with some Rev F Micron goodness.

  4. #129
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Nederlands
    Posts
    635
    Quote Originally Posted by stone_cold_Jimi
    You're going to have to accept that your Ballistix might not like themselves either. Mine aren't as good as they were and that seems to be normal.

    When they fall below spec, hopefully an RMA with bring me replacements with some Rev F Micron goodness.
    Thats not the case pulled out me old cpu and they did 270 mhz. Cant do that with the opteron not even 250. but one cant run 250 @ 2.6 i think its dammage but don't like RMA takes 2 months and need pc every day.
    System Specs: -=Game PC=- | -=Lan Box=-

  5. #130
    Brilliant Idiot
    Join Date
    Jan 2005
    Location
    Hell on Earth
    Posts
    11,020
    Figured id post the cpu that preety much was the beginning for the LDBHE X2 craze.

    This was when i first started researching the x2 steppings about 3 months ago
    LDBHE 0539 RPMW IRC its been under phase so long but i think its the correct stepping. This was in the batch 0500 range. 1.6v 24/7 stable. this is actually an old shot. I've since tweaked the ram timings quite a bit.





    Last edited by chew*; 03-20-2006 at 07:24 PM.
    heatware chew*
    I've got no strings to hold me down.
    To make me fret, or make me frown.
    I had strings but now I'm free.
    There are no strings on me

  6. #131
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Nice chew*, but 1.792v? Is that real? I'm afraid of that kind of voltage lol.

  7. #132
    Brilliant Idiot
    Join Date
    Jan 2005
    Location
    Hell on Earth
    Posts
    11,020
    Quote Originally Posted by stone_cold_Jimi
    Nice chew*, but 1.792v? Is that real? I'm afraid of that kind of voltage lol.
    nah thats a bug on the grouper board...with cpu-z. 1.6v is the max i'm comfortable pushing into a cpu on phase for 24/7 use. This is my everyday rig. I do everything on it while running rosetta 24/7 in the background, I don't even realize its running.........those were completely untweaked video settings to....
    Last edited by chew*; 03-21-2006 at 12:21 AM.
    heatware chew*
    I've got no strings to hold me down.
    To make me fret, or make me frown.
    I had strings but now I'm free.
    There are no strings on me

  8. #133
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Quote Originally Posted by chew*
    nah thats a bug on the grouper board...with cpu-z. 1.6v is the max i'm comfortable pushing into a cpu on phase for 24/7 use. This is my everyday rig. I do everything on it while running rosetta 24/7 in the background, I don't even realize its running.........those were completely untweaked video settings to....
    That's nice then. I wound the 0607 N back to 3000/1.5v, it's comfortable there with CPU at -14C (Rosetta running). 3100/1.62v was about 6C warmer, still haven't tweaked the mem some more to get rid of the random error, I'll see how these 2 WUs get on at lower speed and voltage.

  9. #134
    Registered User
    Join Date
    Mar 2006
    Location
    OCZone@BKK. Thailand
    Posts
    27
    I'm very Happy because My X2 3800+ LDBFE 0607TPMW Can Get Pass Dual Stress Prime2004 at 2.9 Ghz With V-core 1.472

    My room temp, approx 30-32 C

    http://valid.x86-secret.com/show_oc?id=80835



    CPU : AMD FX-8150 Watercooled
    Mobo : ASUS Crosshair V Formula
    RAM : ADATA XPG Gaming 2000G V2 4GB Kits
    VGA : ASUS EAH6950 Unlocked
    HDD : OCZ Vertex 4 256GB


    OverClockZone Team

    THAILAND

  10. #135
    I am Xtreme
    Join Date
    Aug 2003
    Location
    Cherry Hill, NJ
    Posts
    8,296
    My new toy



    Should fly at -70C. And it better since I'm losing cache coming from a 170. Going to fire it up soon. On air that is. Dice friday.
    Last edited by afireinside; 03-22-2006 at 12:18 PM.
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  11. #136
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,265
    results on air ?
    retired computer enthusiast

  12. #137
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Quote Originally Posted by afireinside
    Should fly at -70C. And it better since I'm losing cache coming from a 170. Going to fire it up soon. On air that is. Dice friday.
    Post results soonest. This is the second 060x that I've seen with an AW ending on the date code. It's generally MW. It's something to do with mixing batches or not, can't find the table just now. Anyone?

  13. #138
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    Germany
    Posts
    614
    System
    3800+ X2 3800DAA5BV ...... 0601TPDW
    Cooling by : Thermaltake Big Water 745 ( temp enviroment ~ 10'C , near the windows :P )
    DFI NF4 SLI-D 623-3 bios
    Powercolor X850XT 256Mb
    2x1GB Kingston Value PC3200
    OCZ PS 520W

    @ 310 x 10 Vcore 1.58v
    divider 150 , Vdimm 2.6v

    VID= 1.425v
    VID SPECIAL= 113%
    CHIPSET= 1.5V
    LDT= 1.2V
    LDT= 4X

    CPC = Enable
    CAS Latency(CL) = 2.5
    RAS to CAS(Trcd) = 3
    Min RAS# Active time(Tras) = 8
    Row Precharge Time(Trp) = 3
    Row Cycle Time(Trc) = 7
    Row Refresh Cycle Time(Trfc) = 14
    Row to Row Delay(Trrd) = 2
    Write Recovery Time(Twr) = 2
    Write to Read Delay(Twtr) = 1
    Read to Write Delay(Trwt) = 2
    Refresh Period (Tref) = 3120 =200 15.6us
    Write CAS Latency(Twcl) = 1
    DRAM Bank Interleave = Enabled
    Skew = AUTO
    Skew Value = 0
    DRAM Drive Strength = weak3
    DRAM Data Drive Strength = 1
    DDRAM Response Time= normal
    Max Async Latency = 8ns
    Read Preamble Time = 6ns
    Idle Cycle Limit = 256
    Dynamic Counter = Disabled
    R/W Queue Bypass = 16x
    Bypass Max = 7x
    32 byte Granularity = Disable(4burst)

    ------------------------

    Dont know why CPU-Z shows Ram @ 196 , actually it is @ 221 ( look at A64 Twaeker )


    Last edited by xs64; 04-05-2006 at 06:29 PM.

  14. #139
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    SPi 1M stable LDBFE 0607 SPMW "T" @ 1.62v.

    http://valid.x86-secret.com/show_oc?id=81247

  15. #140
    Xtreme Mentor
    Join Date
    May 2005
    Location
    San Diego, California
    Posts
    3,377
    1M stable at 3.2? What cooling?
    Intel Rig
    2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
    Custom Water of course

  16. #141
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Quote Originally Posted by Absolute_0
    1M stable at 3.2? What cooling?
    Sorry! Single stage phase (Vapo LS). They're not as good as the 0601s, but they're good. The one I took out earlier had run Rosetta at 3100 for hours; this one looks like it will do the same (but runs at 1.47v at 3GHz, less than the 4600).

  17. #142
    Xtreme Mentor
    Join Date
    May 2005
    Location
    San Diego, California
    Posts
    3,377
    Oh ok, i was thinking it was air/water for a second hehe.

    I just got this, thanks to Chew* for hookin me up


    Water results in a few minutes

    Yes its an N chip
    MaxTcasetemp is 69c
    Last edited by Absolute_0; 03-23-2006 at 02:41 PM.
    Intel Rig
    2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
    Custom Water of course

  18. #143
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Can't wait! TPMW and #203....

  19. #144
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,265
    good luck with your 3800
    is it going straight under phase ?
    retired computer enthusiast

  20. #145
    Xtreme Mentor
    Join Date
    May 2005
    Location
    San Diego, California
    Posts
    3,377
    under water right now, priming at 2.9 Ghz.

    Phase in a few days, i'm going on spring break and need to move my comp back home.

    2.95 fails with 1.6
    2.90 fails with 1.56
    2.85 fails with 1.48
    Guess i really need to raise volts
    Last edited by Absolute_0; 03-23-2006 at 03:49 PM.
    Intel Rig
    2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
    Custom Water of course

  21. #146
    Xtreme Mentor
    Join Date
    May 2005
    Location
    San Diego, California
    Posts
    3,377
    Quote Originally Posted by Formann
    3800+ LDBHE 0601TPMW 00274
    DFI SLI-DR
    TT BigTyphoon - 1300RPM

    Still climbing with this one. I have some issues to sort out before I can get it any higher. BIOS 704-2BTA wont let me run the BallistiX on divider over 225 HTT, so I have to run 1:1 and my BallistiX seems to crap out at 285 3-3-3-7

    With only 1.4v for 2850 im hoping 2950-3000Mhz maybe... would be nice a nice 24/7 clock.

    Damn, i've got the same chip with 0203 batch #.
    Needs 1.52v and watercooling to get 2.85 stable though
    Intel Rig
    2500K @ 4.8 Ghz 1.304v | ASRock Z68 Extreme3 Gen3| 2x4Gb Ripjaws DDR3-2133 | Radeon 7970 @ 1250/1800 | Corsair HX850 PSU
    Custom Water of course

  22. #147
    Xtreme Enthusiast
    Join Date
    Nov 2005
    Location
    London UK
    Posts
    951
    Presenting LDBFE 0607SPMW "T" a.k.a. "Mr T" under phase pwning my CDBHE 4600 at 3000 MHz. It's running Rosetta 16/7 (can't leave it on overnight or I'll get an ASBO off the neighbours), so instead of SP2004, here's a more realistic shot:
    Attached Images Attached Images

  23. #148
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    261
    Been looking through these nice 06 steppings and I've decided to hop off the Opter-craze and onto the x2. Are these good 06 stepping still available at places like Newegg or Monarch? Am I still guaranteed a great clocker, or should I buy privately?

    DFI Lanparty NF4 Ultra-D - R. AD0
    AMD Opteron 165 0610DPMW *904* - 2700Mhz @ 1.275
    Scythe Ninja w/ Yate Loon @ 30 idle / 40 load
    G.SKILL 2GB HZ PC4000
    XFX 7900GT @ 555/900
    OCZ Powerstream 520w
    Western Digital Caviar SE16 WD2500KS 250GB
    NEC ND-3550A
    Lian Li PC-7B Plus II
    Dell 2007WFP

  24. #149
    INTEL inside
    Join Date
    Oct 2004
    Location
    Québec, Canada
    Posts
    3,265
    Quote Originally Posted by manomanx2
    Been looking through these nice 06 steppings and I've decided to hop off the Opter-craze and onto the x2. Are these good 06 stepping still available at places like Newegg or Monarch? Am I still guaranteed a great clocker, or should I buy privately?
    2006 X2 = 2.8ghz almost guaranteed
    retired computer enthusiast

  25. #150
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    261
    Yes, I figured that much. However, are the good ones still widely available at Newegg and Monarch, or would I have to buy privately?

    DFI Lanparty NF4 Ultra-D - R. AD0
    AMD Opteron 165 0610DPMW *904* - 2700Mhz @ 1.275
    Scythe Ninja w/ Yate Loon @ 30 idle / 40 load
    G.SKILL 2GB HZ PC4000
    XFX 7900GT @ 555/900
    OCZ Powerstream 520w
    Western Digital Caviar SE16 WD2500KS 250GB
    NEC ND-3550A
    Lian Li PC-7B Plus II
    Dell 2007WFP

Page 6 of 22 FirstFirst ... 345678916 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •