Good luck this is going to be the most xtreme cascades eva.
I think this needs to be added to the sticks in the big projects.
It qualifies easily
Good luck this is going to be the most xtreme cascades eva.
I think this needs to be added to the sticks in the big projects.
It qualifies easily
Xceptionally nice work bro
Yeah, very nice. The metal fab alone is kick-azz.Originally Posted by EMC2
E4300 @ 3.2ghz, 2x1GB Crucial PC-8500, Gigabyte EP45-UD3P, 4850 X-Fire, OCZ Powerstream 520.
I can confirm that mobo cooling is FINE down to at least -25C that's where my immersion cooling had the board and it was fine... colder than that and all bets are off
C
oh and I forgot:
C
sweet piece. what are you using to cool down the mobo?
incredible
i dont think he missed the part of mobo not working with some really low temps look at the help list, this guy has a really good team of helpers, hope you get lots of WR this is an awsome work
signed, can't wait to see the resoult...
that's crazy, I only wish I had that type of enviroment to work in, and with support from all the aformentioned poeple, you're sure to come out with something good. as for cooling the motherboard, are you just relying on the evaps cooling the liquid, or are you planing to axctually have an evaporator with a greater surface are to cool the 3m dielectric liquid?
-Bergo
..oh, almost forgot: OMFG
the subcooling HX'es are placed incorectly, place them after the HX'es...
Ya, I would like to know where that fabrication is taking place too. Very nice job, the reflection on the evap rivals a mirror.
This looks like an amazing project. I hope all goes exactly as you planned.
On the capacitor note, years ago when we first did an immersion on a 486 (me and a bud from university), we exchanged all the caps on the electronics for military grade hardware that carried (at the time) ratings for -60 c. Considering how fast electronics has moved, I'm sure you could do better in this day and age. I doubt it's even a big deal, maybe one of the electronics phreaks here could fill us in.
"Foldin, Foldin, Foldin...keep those benchers foldin..." (Lyrics by Angra, Music is Rawhide)
BOYCOTT MIR's
this will be the nicest cascade I have ever seen.
excelent job on the casing
Dell XPS M1730 - X9000 @ 3400mhz-4096MB 667MHz DDR2 - M8800GTX SLI- 17"WUXGA+
EVGA E762 4Way SLI Classified - 980X @ 6Ghz Ln� 6GB Dominator - MSI 5870 Lightning
WWW.MADSHRIMPS.BE - Being Mad Doesn't Hertz You
great work
this is amazing
simply amazing work
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
What a massive project... dont have any words for it! o yeah i have: VERY GOOD luck!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Most capacitors are rated between -20Cand -25c, you can also buy capacitors that are rated way below -100C to replace all the mobo and gfx caps if you wanted too.
Regards
John.
Edit: relocate your bios battery out of the dielectric, unless you want to be re-entering the bios setup everytime you shut down the power
Last edited by pythagoras; 07-29-2005 at 05:45 AM.
"Thermodynamics is a funny subject. The first time you go through it, you don't understand it at all. The second time you go through it, you think you understand it, except for one or two points. The third time you go through it, you know you don't understand it, but by that time you are so used to that subject, it doesn't bother you anymore".
Yeah, i also like to know how cold you wanna have the motherboard..
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Wow
I have been working with ATI on this problem, I just can't go below -40C, anything below that and the caps are not rated for those temps. They will work just like there suppose to up to -40C any thing below that and they will have problems. Most of the caps on the motherboard I'm using has -65C caps. I will also be watching temps over the motherboard in for zones. I really want to find a company that will make one that can take -70C
AMD FX-57, ATi EXPRESS 200 Motherboard, 1GB TCCD, 74GB Raptors in 0-Raid, RADEON X850 XT Platinum PCI Express, Logitech Z-5500 Speakers, Samsung 191T+
Phase-Cooling
In Ames, Iowa the home town were the first computer was built at Mechanical Comfort Inc is where I'm building the cascade system.
AMD FX-57, ATi EXPRESS 200 Motherboard, 1GB TCCD, 74GB Raptors in 0-Raid, RADEON X850 XT Platinum PCI Express, Logitech Z-5500 Speakers, Samsung 191T+
Phase-Cooling
-70 would be very nice when al the things can handle it. Hope you will make that!
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
wow....
and what a great support team you got....
wild O_O
Posting Permissions
Reply With Quote
Bookmarks